Top Adjustable Bore

EWK 2\ to 7\ 3 Stones Engine Cylinder Hone Tool Adjustable Cylinder Deglazer Piston Honer 220 Grit

  • ...Idea for remove burrs and properly roughen the cylinder walls to produce an oil holding cross hatch pattern and provide an adequate seal..
  • 【 Smooth Surface Deglazing 】Fits 2” to 7 (50.8mm to 177.8mm) diameter brake caliper bores, engine cylinders of automotive, motorcycle and industrial equipment. The 3 pieces adjustable 3” stones are perfect to work with 1/4” power drill for effectively creating friction on cylinder bore..
  • 【 Highly Flexible 】 Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The self-aligning and flexible shaft ensures a smooth movement to get you a nice even hatch pattern bore..
  • 【 Durable & Long Lasting & Replaceable 】 Made of premium steel, maximize the cylinder honing tool with extra strength and durability. The 220 grit stones are replaceable and will worn out gradually depends on how often you use it..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

Fowler 54-646-401-0 Electronic Dial Bore Gage Set with 1.4–6\/35-150mm Range

  • Accurate Measurements: The bore gage features an electronic indicator with resolution of 0.00005"/.001mm and measuring depth of 9 inches.
  • Durable Construction: This electronic indicator provides both inch and metric readings.
  • two-point contact system is used to detect geometry problems such as ovality and taper.
  • carbide-tipped contact points provide extended wear and improved abrasion resistance.
  • The easily adjustable bore gage is self-centering and includes a 2-inch contact extension holder.
  • Minimum Hold Feature: This electric gage locks and holds the bore size as the gage is rocked within the part to be measured.
  • Set Includes: A storage case, 2 batteries, 15 measuring anvils, 4 spacers and an instruction manual.
Check Stock

Isky Racing Cams 100-GRM Groove-O-Matic Engine Block Ringing Tool

  • Pilots in the cylinder bore & is easily adjustable for bore diameter and depth of cut for the copper 0-ring groove.
  • Fast and profitable way to "0-Ring" the cylinder block face.
Check Stock

Bore Sight Kit Green Universal Hunting Green Red Dot Boresight Kit for .177 to .78 Caliber Rifles Pistols (Green)

  • 12 BORE ADJUSTABLE ADAPTERS: Bore sight kit with multiple caliber fit any .177 to .78..
  • PGRADED BATTERY COMPARTMENT: The upgraded battery compartment can install the battery in the correct position, comes with upgraded 800 mAh CR2 batteries, which are easier to install and have a longer service life than other batteries. Large, sensitive push-button switch turns on/off with a simple press for easy control..
  • EASY FOR USING: Very simple and easy for using. Just screw the adapter on the small end of the tool and insert. Only need few minutes..
  • Please contact us if you have any questions, your satisfaction is always our first consideration..
Check Stock

CVLIFE Bore Sight Cal 223 5.56mm Rem Gauge Red Dot Boresighter with Two Sets Batteries & CVLIFE Shotgun Ammo Sling Adjustable 2 Point Rifle Sling Holds 15 Shells

  • 【Bore Sight】Light and compact .223 REM Boresight.
  • 【Bore Sight】Faster gun zeroing, reduce cartridges and shells wasted.
  • 【Shotgun Sling - Length and Width】The two shotgun ammo sling is adjustable, from 108cm to 155cm (including spring hooks), and the width is 5cm..
  • 【Shotgun Sling - Shotgun Shell Holder】The two shotgun sling can hold up to 15 shotgun shells, for 12 or 20 gauge, so you can carry shells at all times to avoid to find shells everywhere..
Check Stock

Milton S-444 Valve Core Tool

  • One end for standard bore, one end for large bore valves.
  • Overall length 5" One end for standard bore and other end for large bore Handle length 3" Skincard.
  • One end for standard bore, one end for large bore valves..
  • Overall length 5" One end for standard bore and other end for large bore Handle length 3" Skin card.
Check Stock

Baldwin Reserve 9BR3530-019 Traditional Ellipse Privacy Knob in Polished Brass

  • Baldwin Reserve Privacy Ellipse with Traditional Round Rose in Lifetime Brass Finish.
  • Features a fully adjustable latch to fit all standard door preparations.
  • Shown with Traditional Round Rose, can be customized with other Reserve roses.
  • To personalize your look, this XX (Traditional, Contemporary, or Rustic) inspired design is available in X (6, 3, or 2) finishes..
  • Features easy-to-install spring assisted chassis for optimal operational strength.
  • 2-1/8" cross bore and 1" edge bore for latch.
Check Stock

XOOBIU Bore Sight Kit Red Laser Boresighter for .177 to .50 Caliber with Battery & Charger

  • ✔PACKAGE INCLUDED: 1 x Red Laser Bore Sight Kit, 1 x Battery, 1x charge, 12 x adapter.
  • ✔EASY TO USE: Come with 12 adapter to fit your gun, you could choose the right size and place the laser unit in the muzzle.
  • ✔LONG BATTERY LIFE: The battery of bore sight is rechargeable, package comes with a charger.
  • ✔ADJUSTABLE LASER: The red laser is light, you could use in the day or at night. The laser could also be adjusted.
Check Stock

Shars 3/8\ x 6\ SCLCL Left Hand Indexable Boring Bar with CCMT Insert 404-2478 P]

Check Stock

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stock