Top Adjustable Die Stock Handle

1/4' Beadlock® Tenon Stock, (25) 1-1/2' Pieces

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center. Simply align the precision-machined notch on the jig's center bar with the dowel location mark on your board, hold the jig and drill..
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center bar, insert the pin in a hole and drill more holes..
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of face frame stiles and top and bottom rails. The handy inch scale lets you accurately set the stop..
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4” thick..
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in imperial (inch) sizes,1/4" 3/8" 5/16" ,not metric..
Check Stock

Danelectro '59 Modified New Old Stock Electric Guitar Black

  • Shorthorn shape Scale length: 253 Number of frets: 21 Fully adjustable wraparound bridge 2 NOS (15 year old) lipstick pickups 2 stacked tone & volume controls 3 way pickup selector Case sold separately.
  • The '59 Modified New Old Stock Electric Guitar is Danelectro' flagship guitar, played by top artists around the globe, and is now available with NOS Lipstick pickups that were made in 1999! These unique pickups offer delicious highs and mids and you find them on any other guitar.
  • Danelectro's pickup supplier "misplaced" a load of lipstick pickups in their warehouse only to discover them recently, 15 years after they were manufactured.
  • These "New Old Stock" wonders have more twang than any Lipstick ever.
  • So Danelectro took their flagship 59M model, with the tuneable die cast bridge, and installed these 15 year-old wonders.
Check Stock

Drillco 2000R Series 63 Piece High-Speed Steel Tap and Carbon Steel Round Adjustable Die Set, Uncoated (Bright) Finish, UNC and UNF Thread

  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Set includes : 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4″-20, 1/4″-28, 5/16″-18, 5/16″-24, 3/8″-16, 3/8″-24, 7/16″-14, 7/16″-20, 1/2″-13, 1/2″-20, 9/16″-12, 9/16″-18, 5/8″-11, 5/8″-18, 3/4″-10, 3/4″-16, 7/8″-9, 7/8″-14, 1″-8, 1″-12, and 1/8″-27, 1/4″-18.
  • Comes with 1-inches & 2-inches round die stock, #7 to 1/2-inches & 1/4-inches to 1-inches adjustable tap wrench, #0 to 3/8-inches t-handle tap wrench and 2 screwdrivers.
  • Comes in an attractive, hand made, wooden case.
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Check Stock

AUTOTOOLHOME Self Centering Doweling Jig Punch Locator Dowel Jig Kit 1/4 3/8 5/16inch Drill Guide Sleeve Tool for Woodworking Joinery

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center.....
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center....
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of....
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4”....
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in....
Check Stock

Stanley Hardware S807-487 V8024 Hinge Pin Door Stop in White

  • Authorized Replacement from National Hardware Stock #N279-711.
  • Mounts on a door hinge to prevent damage to wall.
  • Zinc die-cast body, steel adjusting screw, rubber and plastic tips.
  • Easily adjustable by turning adjusting screw.
Check Stock

1\ NPT Pipe Carbon Hex Rethreading Die

  • ...ad (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.
Check Stock

Sizzix Adhesive Sheets, 6 by 6-Inch, 10/Pack

  • With the easy peel strip, these Adhesive Sheets are quick and easy to use. You can use them to transform your die cuts into stickers. Simply peel off the backing, adhere to your card stock, place your die on the card and roll through your die-cutting machine. Peel off the other backing from your die-cut and adhere to your make. Alternatively, you could make the sticker and use the sticky side to adhere glitter or gold leaf to decorate your die-cut..
  • This package contains ten 6×6 inch adhesive sheets.
Check Stock

Autolock Air Die Grinder, With 1/4\ And 1/8\ Collets, Right Angle Die Grinder, 20,000 Rpm, Adjustable Speed, 2021 New Version Pneumatic Die Grinder, Black

  • 【New Version】 New Version Right Angle Die Grinder, New functional design, adjustable speed, non-slip handle, bottom exhaust..
  • 【Adjustable Speed】 Pneumatic Die Grinder speed can be adjusted by a knob, easy to use to meet the functional needs in different scenarios..
  • 【Durable & Light Weight】 Even with the addition of many functions, the body weighs only 1.8 pounds, reducing fatigue, and the body is made of composite materials for longer life and more durability..
  • 【Ergonomic Design】 The 90-degree head allows flexibility in many applications, for reaching tight or angled grinding. Special non-slip handle, feel more comfortable, ergonomic design allows you to work better for extended periods..
  • 【Wide Application】 20,000 rated RPM powered free speed pistol handle rotary tool with 1/4" and 1/8" collet accepts a variety of heads for weld prep, grinding, polishing, sanding, and more for all of your home improvement projects..
Check Stock

Hanson 12436 Die Stock 1-7/16\ Hex Adj, for Tap Die Extraction

  • Hexagon metric dies are ideal for automotive repair and machinery where metric threads are specified.
  • These dies are designed to ensure that bolts fit tightly and anchor securely.
  • High-carbon steel hexagon dies are great for cutting right-hand external threads.
  • Hex-head shape is designed for use in die stock and adjustable wrenches.
Check Stock

Hunkydory Crafts The First Signs of Spring Little Duckling Designer Deco-Large Card Kit FSSPRING907

  • This is a kit features Quality Hunkydory Craftsmanship.
  • 1 Sheet of Die Cut and Foiled Images printed on 300gsm Card Stock.
  • 1 Sheet of Foiled and Die Cut Base Images printed on 350gsm cardstock.
  • 1 Sheet of Coordinating Printed Adorabel Scorable Cardstock Printed on 350gsm Card Stock.
  • This kit is designed to make one card. However, if you distribute layering pieces among the images, you can get more cards..
Check Stock

Evike Airsoft - CYMA Sport Airsoft M16A3 Metal AEG Package Gun Only

  • ◙ NOT a part or component. NOT for real weapons. Optics (Scopes/Red Dots in images) NOT included unless stated clearly. Battery and Charger may not....
  • Aluminum alloy upper and lower receivers and Construction.
  • Fixed stock with polymer handguard, stock and Grip Handle.
  • Removable carry handle exposes 20mm accessory rail, ideal for mounting optics or other accessories.
Check Stock

GRR-RIPPER Complete Double Pack Limited Addition by MICROJIG

  • GRR-Ripper Advanced 3D Pushblock features Micro Jig's proprietary non-slip Green GRR-RIP textured gripping surface for greater control.
  • 3 legs for multi-directional stability and control.
  • a stabilizing plate to lock your material against the fence to keep your work square and flush.
  • an adjustable spacer that gives you 54% more gripping surface and 1" of additional cut capacity to take on your biggest projects and wider cuts.
  • and an adjustable handle for maximum comfort..
  • GRR-Ripper 1/8" Leg Accessory attaches to pushblock body or side leg to allow for safe, accurate, and consistent ripping of 1/8" thin strips. Gravity Heel Accessory features auto-retracting technology for reducing blowout. Provides a secure backing to routing operations and can be used as a template for repeat routing. Exceptional with long stock -- the heels grab the tail end of your board and automatically retract mid-board. Includes 5 heels, 2 heel spacers and mounting hardware..
  • Gravity Heel Accessory features auto-retracting technology for reducing blowout. It provides a secure backing to routing operations and can be used as a template for repeat routing. Exceptional with long stock -- the heels grab the tail end of your board and automatically retra....
Check Stock