Top Adjustable Leg Bolts

Anwenk Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate 5/16\ (M8) Sofa Legs with Hanger Bolts,Screws,Strengthen Weak Furniture Repair Damaged Sofa Couch Seat,Set of 4

  • Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (Metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10 hanger bolts, these plates allow you to use standard 8mm to convert to U.S. Standard Legs by simply attach these mounting brackets with the over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

LIBRA 3500lbs Electric Power A-Frame Tongue Jack for Trailer & Camper 26041

  • Featured slim desgin, Stroke 20% faster but powerful and quiet..
  • Emergency detachable hand crank included,mounting hardware inlcuded!.
  • One-Piece motor cover preventing rain damge, Stainless steel screws/bolts outside motor cover never rust! Powder coated outer tube.
  • Over size 5.5" diameter foot plate, more stable support, rain water drain holes on foot plate..
Check Stock

Leg Mounting Plates, 4 Sets Furniture Leg Attachment Plates, 5/16\(M8) Industrial Grade Flat Mounting T-Plates with Hanger Bolts, Screws, Strengthen Weak Furniture Repair Damaged Sofa Couch Seat

  • 【Widely Application】 The mounting plates fit most types of furniture in the market, is good helper in repairing the furniture, attaching legs to new or damaged sofas, couches, seats, ottomans and more, no more wobbly leg..
  • 【Industrial Standard】 Each T-plate is 2" x 2" and 1/4" deep (approx), plates have 5/16" threaded (Metric M8) attachment holes for hanger bolts, have 4 unthreaded holes..
  • 【Easy to Install】No need to purchase compatible hanger bolts and the screws, can be installed in a few minutes. package includes all necessary parts, 4 pcs sofa leg mounting plates, 4 pcs M8 hanger bolts, 4 pcs M8 female converters, 16 pcs screw..
  • 【Convert to U.S. Standard Legs】 If your sofa legs are pre-drilled for M10 hanger bolts, these plates allow you to use standard 8mm to convert to U.S. standard legs by simply attach these mounting brackets with the over the hole in the furniture frame..
  • 【Sturdy & Durable】The strong mounting plates is made of premium metal, can hold up the furniture well and extend the life of yourcouch, dresser, table and ottoman. if you have any question about our mounting plates, please feel free to contact us immediately..
Check Stock

Ozark Trail 10' X 10' Canopy Gazebo Pole Cap Leg Connector Part

  • Upper Leg Cap For Ozark Trail Instant 10' x 10' Straight Leg Canopy Gazebo or any brand have same dimensions and specification.
  • Included: One Upper Leg Cap Connector Only..
Check Stock

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

  • ...w or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
  • Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

OZARK TRAIL 12' x 12' Canopy Gazebo 2 Way Leg Slider Pole Connector Replacement Parts

  • Leg Slider For Ozark Trail instant 12' x 12' Straight Leg Canopy Gazebo Model: WMT-1212115A or any brand have same dimensions and specification.
Check Stock

Aiscool Grand Patio Recliner Chair Adjustable Wicker Knitting Chair Beige Cushion Integrated Side Table Single Chair

  • Adjustable recliner: This outdoor recliner features an adjustable leg and back mechanism (tilt range: 160 degrees). The tilting mechanism allows you....
  • Cushion and side table: cushion lining is made of 80mm high rebound cotton, with moderate hardness, soft and fluffy, not easy to fold. The cushion....
  • Stable and durable: this indoor and outdoor lounge chair has a powerful powder coated steel frame that can hold up to 330 pounds. This deck chair is....
  • Handmade and detachable: It is preferably made of environmentally-friendly PE rattan, which is safer without peculiar smell, reasonable design, and....
  • Easy to assemble: Includes all necessary parts and tools. Just tighten a few bolts quickly and easily, and your recliner can be assembled and ready to....
Check Stock

Isaazon 80lbs Pistol Self Cocking Crossbow 3 Arrows New recurve Crossbow Powerful

  • The Crossbow.Ideal for turkey/small game hunting.
  • Easy Assembly, 80 Lb Draw Weight, 225 Fps W/ Plastic Bolts, 175 Fps W/ Aluminum Bolts, Fiberglass Limb.
  • Easy Cocking Stock, Upper & Lower Weaver Rails, Foregrip W/ Finger Guard, Fiber Optic Front Sight.
  • Adjustable Rear Sight, Five Position Adjustable Stock, Auto Safety Mechanism, Weight: 1.80 Lbs, Width: 17.5", Power Stroke: 7".
  • Length: Fully Extended Stock: 24", Fully Closed Stock: 22", Includes Three 7/8" Broadhead Bolts, Includes Three 7/8" Broadhead Bolts, Includes Three Aluminum Bolts, Includes Target.
Check Stock

Isaazon 80lbs Self Cocking Hunting Crossbow Recurve Pistol Grip Cross Bow 225+ FPS

  • The Crossbow.Ideal for turkey/small game hunting.
  • Easy Assembly, 80 Lb Draw Weight, 225 Fps W/ Plastic Bolts, 175 Fps W/ Aluminum Bolts, Fiberglass Limb.
  • Easy Cocking Stock, Upper & Lower Weaver Rails, Foregrip W/ Finger Guard, Fiber Optic Front Sight.
  • Adjustable Rear Sight, Five Position Adjustable Stock, Auto Safety Mechanism, Weight: 1.80 Lbs, Width: 17.5", Power Stroke: 7".
  • Length: Fully Extended Stock: 24", Fully Closed Stock: 22", Includes Three 7/8" Broadhead Bolts, Includes Three 7/8" Broadhead Bolts, Includes Three Aluminum Bolts, Includes Target.
Check Stock

Yamaha L3C Collapsible Bolt-On Keyboard Stand

  • Stand bolts on in three places giving the open leg desk style feel..
  • Bolts directly to many of Yamaha's PSR, YPT, Piaggero (NP), & EZ Portable Keyboards.
  • Collapsible design for easy transportation.
Check Stock

AOWISH 4-Pack Stainless Steel Furniture Legs Furniture Foot Upgraded & Thickened Cabinet Metal Legs 2 Inch Diameter Shelves Sofa Table Kitchen Adjustable Feet with 16 Screws (4 inch/100mm-Black)

  • ✔ SET OF 4 LEG MOUNTING PLATE - 4pcs of 49*49mm /2"*2" T-Plate, 4pcs of M8 hanger bolts, 4pcs of M8 female converters, 16pcs of screw adapters for 5 mm unthreaded holes.
  • ✔ CONVERT TO U.S. STANDARD LEGS - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use standard 5/16” and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame.
  • ✔ FURNITURE REPAIRING REPLACEMENT - this furniture leg mounting plate can attach legs to new or damaged sofas, couches, seats, ottomans, etc.
  • ✔ WIDELY APPLICATION - These plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • ✔ EASY TO INSTALL - No need to purchase hanger bolts and the other screws separately. You can raise the height of your sofa to replace the legs screw with this matched item.
Check Stock

Craftsman Storage Shelving Unit (4-Tier)

  • ...lity shelf within 10 minutes alone. Tips: We offer a mallet and a pair of gloves for your convenience.
  • 39.3” W x 18.9” D x 57” H GARAGE STORAGE SHELVES WITH WIDELY APPLICATION. The heavy duty storage shelves is versatile for garage, kitchen, warehouse, living room, bedroom, basement, workplace, and etc. 4-tier adjustable shelving not only enlarge your storage space to keep your home neat and organized, but also easy to store when not in use.
  • SAY GOODBYE TO STRONG SMELL, MILDEW & SHAKING. Raybee heavy duty garage shelves rack use thickened steel boards instead of flimsy particle board. Three support ribs at the back of steel boards ensure the support capacity and safety. Differ from particle board with strong smell and easily mildew, Raybee steel board is odorless and healthier.
  • ADJUSTABLE STEEL GARAGE SHELVES MEET DIFFERENT NEEDS. Raybee utility shelf rack is designed with adjustable connector, the height of each layer is not only adjustable through moving the cross bar up or down to meet different height of varied objects need, but also the boards can be assembled or disassembled into several different tier shelves, like 2 horizontal rack as workbench or 1 vertical rack for storage.
  • CONVENIENT TO MOVE. Freestanding steel shelf and 4 exactly design....
Check Stock