Top Adjustable Reamer
1 3/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56049, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 7/8 " shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check StockDrill America 11/16\ HSS Straight Shank Machine Expansion Reamer (Pack of 2)
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 3/4 " shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 1/2 " flute length, Partial Flute Length Carbide.
- 3/4 " shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 1/2 " flute length, Partial Flute Length Carbide.
- Morse taper shank #3, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 1/2 " flute length, Partial Flute Length Carbide.
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 3/8 " flute length, Partial Flute Length Carbide.
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 3/4 " flute length, Partial Flute Length Carbide.
- 1" shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 2" flute length, Partial Flute Length Carbide.
- Morse taper shank #4, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check StockBeer Tap Faucet Handle Black - Set of 10
- WHAT WILL YOU GET - You will get a M3-M12 tap wrench. Fit 1/16" - 1/2" / 2.5mm - 12mm capacity size. Overall size(closed) is 19.3cm x 2.3cm x 1cm/7.6inch x 0.9inch x 0.4inch(LxWxH). Shank diameter is 8mm/0.3inch..
- HIGH QUALITY TAP REAMER - The adjustable tap wrench is made of high-quality steel, with high hardness, strong wear resistance and long service life. The end of the tapping wrench tool is knurled for easy and firm grips. The hand wrench tool has one rigid handle and one adjustable jaws, which can easily and firmly clamp the tools..
- MULTIPLE USE - The tap reamer wrench is designed for use with small tools that require manual rotation, such as taps, reamers, drill bits, and screw extractors. Manual operation is very simple and convenient, which can improve your work efficiency. It is also very suitable for DIY tapping..
- EASY TO USE - When using a tapping wrench, apply even force with both hands. The wrench and the tap should form a 90-degree angle, and the tap and the threaded bottom hole are perpendicular to each other, rotate the adjustable metal tap handle reamer wrench in a certain direction..
- QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top pr....
Check Stockuxcell 13.75mm-15.25mm Cutting Diameter HSS Adjustable Hand Reamer Milling Cutter
- Cutting Hole Size : 13.75mm-15.25mm/ 7/13.
- Square End Size : 6 x 6mm/ 0.2" x 0.2"(L*W).
- Total Size : 160 x 14mm/ 6.2" x 0.5"(L*Max.D).
- Package Content : 1 x Adjustable Hand Reamer.
Check Stock1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 7/8 " flute length, Partial Flute Length Carbide.
- Morse taper shank #4, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check StockHHIP 2006-0085 15/16-1-1/16\ High Speed Steel Adjustable Blade Reamer, 6 Blades, 9\ OAL, Size H
- Straight flute reamers should be used in thru-hole applications only.
- Blades are adjusted by loosening one nut and tightening the other.
- Adjustable blades give the operator the ability to handle multiple hole sizes with a single tool.
- Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench.
Check Stock