Top Adjustable Stainless Steel Hose Clamp

112pcs Hose Clamps Stainless Steel,Stainless Steel Clamps,Hose Clamp Assortment Kit,Adjustable Worm Gear Heavy Duty Pipe Clamps

  • Stainless Steel Material: All fittings on the hose clamp are made of 304 stainless steel, which is sturdy and durable, with good acid and corrosion resistance. You can safely use pipe clamp to fix outdoor pipes without worrying about rusting and cracking.
  • Adjustable Design: All hose clamps stainless steel can be adjusted by screws according to the diameter of the pipe, so that the pipe can be fixed more firmly..
  • Tightly Bound: The tube clamp is very flexible and can be tightly tied to the pipe without loosening, thus preventing liquid leakage.
  • 8 Specifications: There are 112pcs o clamps, including 8 size specifications. Their adjustable range is 24 pieces of 8-12mm, 18 pieces of 10-16mm, 18 pieces of 13-19mm, 12 pieces of 16-25mm, 10 pieces of 18-32mm, 10 pieces of 19-29mm, 10 pieces of 21-38mm and 10 pieces of 21-44mm. Comprehensive size specifications to meet your various needs.
  • Wide Application: The hose clamp kit has a very wide range of applications, and can be used to fix hoses, pipes, cables, pipes, fuel pipes, etc..
Check Stock

AKIHISA 4 Pack 26-28mm ID Range T-Bolt Hose Clamps 304 Stainless Steel Heavy Duty Adjustable Tube Clamp1 to 1.1 Inch

  • [Clamps Size] T bolt clamp adjustable work range 1.02-1.1" (26mm to 28mm).
  • the screw bolt M6*40mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products..
  • [Premium Material] T bolt hose clamp (including the band, housing and screw) is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
  • [Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
  • [Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [Wide Applications] high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..
Check Stock

Hose Clamp Assortment Kit - 50PCS 1/4 –1 1/8 inch 304 Stainless Steel Worm Gear Hose Clamps for Fuel Line,dryer,Garden Water Pipe and Washing machine - 3/8 ,3/4,1/2,5/8Inch Hose Clamps

  • ....026'' thick premium 304 stainless steel with smooth edge. The stainless hose clamps are durable and have excellent corrosion and acid resistance, perfect for use even in harsh conditions.The hose clamps are reliable, strong, water proof and oil proof..
  • [Strong Tightening Performance]:The hose clamps are high torque,adjustable range, secure hold and smoothly drive. The average torque of the hose clamps is 9.5N and can hold well onto the hose and pipes for a very long time.Hose clamps have clamping range from 1/4 inch to 1 1/8 inch , perfect for 1/4 inch ,7/16’’,3/8’’,5/8’’,1/2’’,3/4’’,1’’,7/8’’ and 1 1/8’’ hose clamps..
  • [Easy Installation]:Our hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking, and strong torsion force. This worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs. This allows stainless steel hose clamps to provide a stronger tightening force and easier to install..
  • [Wide Applications]:Adjustable pipe clamps stainless steel is ideal for automotive, home, industry, gardening, machinery, electronics, marine, marine, etc. This clamp set contains wide inner diameter range gear clamp that meet your needs in diff....
Check Stock

Hose Clamp HongWay 78 Pack Stainless Steel Assortment Adjustable Range 1/4-2in 6-51mm 304 Stainless Steel Hose Clamp with 2pcs Socket Wrench for Plumbing Automotive and Mechanical Application

  • [Durable Quality] - The entire hose clamp (including belt, shell and screw) is made of heavy-duty high-quality 304 stainless steel. Resistant to salt, water, and oil. The hose clamp is sturdy, firm and reliable. No more worrying about rusting and cracking when installing on pipes..
  • [Adjustable Size Range] - The hose clamp is flexible and extensible, with adjustable width, and the size range is from 6-51mm (1 / 4in-2in). The hose clamp width ranges from 8mm to 12mm, suitable for fixing pipes of various sizes..
  • [Wide Applications] - Hose clamps are firmly locked and can be used to fix hoses, pipes, cables, pipes, fuel lines, etc. Ideal for indoor or outdoor use in automotive, industrial, marine, home, etc..
  • [Reusable Material] - If you don't want them to stay where they were, it can be reused and recycled because of the high quality materials that make them work for a long time..
  • [Save time and money] These stainless steel hose clamps are installed on the joints of the hose joints to prevent fluid leakage, saving expensive repair time and money..
Check Stock

2 1/2 Inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Dust Collection, Automotive, RV Clamp 5 pack (2 1/2\ Hose Clamps)

  • ...nd easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen..
  • FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8” (2.877” or 73.08mm) in full diameter down to appx. 1-7/8” (1.874” or 47.61mm) at its most compact diameter..
Check Stock

GLIDESTORE 4-Inch Key Hose Clamp Key-Type Adjustable Stainless Steel Hose Clamps Pipe Clamp Worm Gear Clamps Dryer Vent Clamp Thumb Screw Metal Clamps Pack of 10 Easy Turn Clamp 4 - Inch

  • ✔ HIGH-END MATERIAL: Hose clamps stainless steel made of stainless steel, constructed to resist scaling and corrosion and ensure long- term use..
  • ✔ AMAZING FUNCTION: These dryer vent clamp are used to lock the hose tightly with a view to preventing flow leakage. This hose clamp assortment kit can be applied for securing hose, cable, pipe, tube, fuel lines in domestic applications, automotive, boat, industrial and so on..
  • ✔ EASY TO USE: Can be simply loosened or tightened by using the adjustable handle without any other tools..
  • ✔ HUGE QUANTILY, SMALL COST: Each package consists of 10 pack 4-inch hose clamp (Easy Turn Clamp), the size of each clamp is about 4 inch (DIAMETER).
  • ✔ 100% MONEY BACK GUARANTEE: Customer satisfaction is our utmost priority. If you are dissatisfied with 4 hose clamp, drop us a message and we are certain to give you a full refund..
Check Stock

AKIHISA 10 Pcs 2 Hole U Tube Strap Clamp 304 Stainless Steel Rigid Pipe Strap Strap Clamp ID 31/64Inch(12mm)

  • ♛ HIGH QUALITY ---- High quality 304 Stainless Steel 304 hose clamp, plating zinc, Can resist the corrosion and rust in marine environments. The steel adopts hole technology makes its screw tightly bite the steel band..
  • ♛ WORKING GREAT ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
  • ♛ EAST To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • ♛ ENVIRONMENTAL FRIENDLY ---- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
  • ♛ WIDE ADJUSTABLE SIZE RANGE- Clamp kit are flexible and ductile with wide adjustable size range from 14mm to 311mm/0.55-12.24 inches. So many sizes are enough for daily needs. You could free adjustment to adapt to different sizes of hose. We offer various sizes to meet your different needs, just choose the right size..
Check Stock

LOKMAN 5 Pack 12 Inch Stainless Steel Hose Clamps Large Worm Gear Duct Clamps Adjustable from 11.5 inch-12 inch / 290mm - 310mm Fuel Line Hose Pipe Clamp for Dryer Vent Hose

  • 12 inch Size is for DIAMETER, NOT FOR circumference. - 304 Stainless Steel Hose Clamps- The whole large duct vent clamp (including the band, housing and screw) are all made of premium 304 stainless steel. Durable, strong and rust resistant..
  • Flexible adjustable size rang- Flexible and durable metal fuel line hose clamp with adjustable diameter size range from 11.5 inch-12 inch. Fit for hose diameter 290-310mm/11.5-12 inch. Secures ducting tightly in place..
  • Widely Use- These large metal hose clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, shield, household etc. Both indoor or outdoor..
  • Great Value - LOKMAN large quantity set stainless steel hose clamp achieve great favorable price. The large quantity, the more favorable price. You can't miss it if you need a large bunches..
  • Environmentally Friendly- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
Check Stock

Hoses Clamps Clamps Worm Worm Clamps Stainless Steel Large Hose Clamp Worm Drive Hose Clamps Adjustable Pipe Hose Clamp for Intercooler Pipe Plumbing Tube and Fuel Line 9 Pieces,11.5 Feet

  • DIY hose clamp: you can trim the hose clamp strap in length you want easily, then insert the fastener to make a suitable size you want, no more waste any materials.
  • You will get 1 piece adjustable hose clamp and 8 pieces fasteners, enough quantity to meet your different needs.
  • Longer hose clamp: the stainless steel duct clamp strap's total length is 11.5 feet, suitable to cut and get your long large hose clamp in different sizes, such as 12 inch, 14 inch, 16 inch and so on, the max size is 43 inch.
  • Durable material: the hose clamp and fasteners are made of quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, strong, durable and long lasting use, which can be applied in outdoor and coastal areas.
  • Powerful function: adopts the open structure of inner and outer ring and the bolt is fastened, the worm drive pipe clamp is torsion-resistant, pressure-resistant, tightly locked and with large adjustment range, provides sealing performance and helps to solve the problem of liquid gas leakage.
  • Easy to use: you just need to loosen or tighten the screw of the hose clip by a screwdriver to adjust the size, attach the hose to the fitting tightly, and it can be applied to secure hoses, pipes, cable, tubes, etc..
Check Stock

Homagic Hose Clamps 39 FT Adjustable Stainless Steel Large Hose Clamp with 13 Fasteners Duct Clamps for Automotive Pipes Cables Tubes Heating Cooling

  • ...at one time. With 13 fasteners, complete equipment.
  • More durable: These band hose clamps are made of high-quality 304 stainless steel. It can also be used outdoors and coastal areas. It is corrosion-resistant, waterproof and rust-proof. The sturdy material ensures that the adjustable hose clamp is durable and reusable.
  • More practical: The clamp is locked, and the design of the worm drive pipe clamp enables a large adjustable range, better sealing, and can solve many problems such as liquid and gas leakage.
  • Simpler: Installing metal strapping in accordance with the correct instructions will get twice the result with half the effort. Use a screwdriver to loosen or tighten the screw of the hose clamp to adjust the size, and fix the hose strap tightly on the pipe.
Check Stock

ZIPCCI Hose Clamp 25 Pack Stainless Steel Worm Gear fuel line hose clamps 16-25mm 5/8-1 inch

  • Package includes: 25 pieces 3/4 inch hose clamps..
  • Hose clamp clamping range from 16 to 25mm (5/8 to 1 inch).
  • 304 Stainless steel hose clamp provides maximum corrosion resistance to salt and most chemicals..
  • Adjustable style hose clamp for a variety of applications for marine, auto, water pipes, fuel lines, etc...
  • Use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
Check Stock

GLIDESTORE Worm Gear Clamp Stainless Steel for Home Brewing Plumbing Automotive and Mechanical Applications Beer Line Clamps 10-16mm 0.39 -0.63 Pack of 15

  • ✔ 100% MONEY BACK GUARANTEE: Customer satisfaction is our utmost priority. If you are dissatisfied with Worm Gear Clamp Stainless Steel, drop us a....
  • ✔ HIGH-END MATERIAL: Worm Gear Clamp Stainless Steel made of 201 stainless steel, constructed to resist scaling and corrosion and ensure long- term....
  • ✔ AMAZING FUNCTION: These Worm Clamp are used to lock the hose tightly with a view to preventing flow leakage. This hose clamp assortment kit can be....
  • ✔ EASY TO USE: Can be simply loosened or tightened by using the adjustable handle without any oth.
  • ✔ HUGE QUANTILY, SMALL COST: Each package consists of 15 pack Beer Line Clamps, the size of each clamp is about 10-16mm (0.39 inch-0.63 inch).
Check Stock