Top Advertising Industry Laser Cutter Machine

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

ZONEPACK Manual Stretch Film Wrapping Machine Dispenser Tools Pallet Packing Machine Equipment Film Package Machinery

  • Suitable for small than 500mm width film.
  • Equipped with a knife, which is more convenient to cut the film, save time and improve your work efficiency..
  • With 2 holes on the back to fixed on the wall to avoid the machine swing when working..
  • Applicable to packaging of goods in the food industry, electronic industry, spare parts industry, advertising industry and other industries..
Check Stock

harayaa Hot Wire Electric Foam Styrofoam Cutter Table Machine Physics Teaching Aids

  • It is not suitable for children with this machine. Do not exceed 40 minutes for a single continuous . has a switch be used intermittently!.
  • The temperature of the wire is high when , so please keep away from and materials!.
  • Hot Wire Foam Cutter Foot Control Pedal 2021 Tabletop Hotwire Cutter for , Forming and Sculpting and Other Foam Materials..
  • Especially suitable for building, planning units, advertising enterprise production model use, teaching model, small scale foam, , extruded board production..
  • Some materials will smell when , recommended in a ventilated environment..
Check Stock

SCULPFUN S9 Laser Engraver, Full-Metal CNC Laser Engraving Machine with 5.5W High Precision 0.06mm Ultra-Thin Beam Diode Laser Cutter for Wood, Leather, Acrylic, Large Engraving Area 410x420mm

  • ...n and accuracy, It can cut up to 15mm thick lightwood, 10mm black acrylic and carve ceramics, stainless steel and dark stone..
  • 【Fast Focusing and High Accurancy】With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of SCULPFUN S9 laser engraver machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • 【Security and Protection Designs】The laser filter cover of SCULPFUN S9 laser engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • 【Sturdy and Easy to Assemble】The all-metal structure design makes the desktop SCULPFUN S9 laser cutter more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
  • 【Widely Compatibility】The S9 laser cutter and engraver machine works well with various engraving software, such as ....
Check Stock

Comgrow Z1 Laser Engraving Machine 5W Output Power, Laser Cutter and Engraver Machine 24V Compressed Spot 10000mm/min with Eye Protection for Wood Metal Glass Acrylic Leather 15.7'x15.7'

  • 【Powerful Laser Technology】: Comgrow Z1 laser cutter and engraving machine, with 5W diode laser module, 0.08 mm laser spot gives a precise cutting and engraving. Powerful laser units are available for cutting 5mm thickness of plywood at one time.
  • 【DUAL Y-AXIS MOTOR】: The Y-axis of acrylic engraving machine is extremely smooth and extremely mobile. Not only provides almost unbelievable speed when engraving but also increases the stability and accuracy of the project..
  • 【Extensive software adaptability & Multiple connection methods】：Z1 laser engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data via Wi-Fi, USB cable, and SD card and use Z1 laser cutter and engraver machine anytime and anywhere..
  • 【SUPPORT EXPANSION】: This device It can be upgraded with Comgrow rotary roller, perfect for engraving tumblers and cylindrical objects! It has a stable design for multiple diameters. Spacing between the two rotary axes ranges from 8mm(0.31in) to 86mm(3.9in). You can engrave angthing you want..
  • 【More Choices 】: 5W or 10W high-power laser prov....
Check Stock

ATEZR P10 Combo 60W Laser Engraver with Air Assist& Rotary Roller, 430 * 430mm Working Area, 10W Laser Power CNC Laser Engraver for PC/Mobile, Hypersonic Laser for Wood/Metal/Acrylic etc.

  • 【Great Value Combination - ATEZR P10 COMBO】P10 laser cutter and engraver machine comes standard with 1 air assist (KA) and 1 high density aluminum roller(KR). The 30L+/min air assist blows away the high temperature smoke generated during laser operation through the unique air duct built into the laser module, which helps to engrave more delicate models. You can use the roller to engrave objects with diameters from 2mm-150mm, such as goblets, skateboards, pencils, etc.
  • 【Stability and Efficiency】The Atezr P10 laser engraving machine is made of high-density aluminum alloy. It can ensure engraving accuracy and stability even at a high speed of 24,800mm/min, and save nearly 40%-80% of working time. The engraving area of Atezr P10 engraving machine is increased to 430mm*430mm, which can engrave larger materials.
  • 【Powerful Laser Technology】ATEZR P10 60w Laser Engraver has 10W laser output power. The laser focus area is reduced to 0.08*0.06mm, which can cut 10mm wood board and 6mm black acrylic at one time.ATEZR P10 laser cutter can cut up to 18mm wood board and 30mm acrylic board. It can combine precision engraving and high energy cutting. The working life of the laser module can reach 30,000+ hours.
  • 【Multiple Connection Modes】ATZER laser cutti....
Check Stock

ATOMSTACK A5 M50 PRO Laser Engraver, 40W Laser Cutter with Offline Engraving, Laser Engraving Machine with APP Operate Fuction, 5.5W-6W Output Power, 410x400mm

  • ...aver is without WiFi at first. Please check the video which below the product pictures named "Upgrade the firmware for the engraver and operate with APP". You can also contact with the seller to get the APP manual and help for updating the firmware..
  • 【Upgraded Compression Laser Beam】The laser cutter and engraver machine has quadruple lens compression Technology. 5-5.5W Optical Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products. The high-density laser can easily cut 15mm light wooden boards, 12mm acrylic.The newly compression laser beam engraving speed is 60% faster than ordinary laser..
  • 【Eye-protection Flame-retardant Filter Panoramic Glass】The engraving machine is equppied with the fliter glass can prevent eye burns, and eliminate the hidden danger of acrylic being easily burned. You can also clearly watch laser engraving but you do not need to wear goggles. Thus not only reduces the cost of the goggles, but also makes engraving safer..
  • 【Intelligent Protection Design & Emergency Button】Limit switches are installed on both X-axis and Y-axis. At the maximum stroke of the laser cutter machine, the limit switch is automatically triggered to protect the laser and avoid collision....
Check Stock

Comgrow Z1 Laser Engraver 10W Output Power, 24V Desktop 48W Laser Cutter and Engraving Machine with Eye Protection Compressed Laser Spot 0.08mm, 10000mm/min Diode Laser Cutting for Metal Wood

  • 【Powerful Laser Technology】: Comgrow Z1 laser cutter and engraving machine, with 10W diode laser module, 0.08 mm laser spot gives a precise cutting and engraving. Powerful laser units are available for cutting or etching plywood, some cloth and etching aluminum, stainless steel..
  • 【DUAL Y-AXIS MOTOR】: The Y-axis of acrylic engraving machine is extremely smooth and extremely mobile. Not only provides almost unbelievable speed when engraving but also increases the stability and accuracy of the project..
  • 【Extensive software adaptability & Multiple connection methods】：Z1 laser engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data via Wi-Fi, USB cable, and SD card and use Z1 laser cutter and engraver machine anytime and anywhere..
  • 【SUPPORT EXPANSION】: This device It can be upgraded with Comgrow rotary roller, perfect for engraving tumblers and cylindrical objects! It has a stable design for multiple diameters. Spacing between the two rotary axes ranges from 8mm(0.31in) to 86mm(3.9in). You can engrave angthing you want..
Check Stock

LENJKYYO 4Axis CNC 6090 Router Engraving Machine 1.5KW, USB Engraver VFD Drilling Milling Machine for Wood Working and Advertising Signs Bronze Plate Circuit Boards w/Remote Controller

  • ★The 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood..
  • ★Water cooling spindle works more stable and durable. Anti-blackflash,high precision,long life circle..
  • ★High quality accurate ball Screws drive make the engrving more precision..
  • ★Woodworking industry: sculpture, round carving, wooden handicraft processing.
  • Advertising signs: logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products..
  • ★The engraver could do shadow-carved, sculpture which widely used in the gift industry.
  • can be used in aluminum cutting industry,such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter , making plastic light box model.
  • also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet..
Check Stock

FoxAlien Reizer Mega 20W Desktop Laser Engraver, Compressed Spot 32-bit Laser Engraving Cutter Machine for Wood MDF Ceramic, Acrylic, Metal (31.5x15.75 inches Large Work Area)

  • ...le (5W optical output). With the advanced laser technology, the laser dot is only 0.08*0.12mm, which makes the laser more powerful and precise. It has great performance both in engraving and cutting. It can cleanly cut a 6mm thick plywood in a single pass..
  • Stable, Fast & Smooth】Reizer Mega laser machine uses dual Y-axis motors. Two NEMA17 stepper motors ensure the machine run more stably and precisely than those with single Y-motor. The motors are driven by a 32-bit control board. It is more stable, faster and quieter. Engraving speed can reach 20000mm/min. It can greatly improve the carving efficiency..
  • 【Easy Assembly & Safety Protection】The machine is pre-assembly into several big parts. No complicated assembly of piece by piece. High quality aluminum profiles make the laser cutter reliable and stable. Assembly can be completed within 10-20 mins. Protective shield on the laser module can filter 97% UV light and protect your eyes..
  • 【Various Peripheral Products for Upgrade】31.5x15.75 inches (800x400mm) super large engraving area meets daily DIY needs. Reizer Mega is available for upgrade to fulfill more engraving needs such as cylindrical objects engraving. Various peripheral products are available for Reizer laser cutt....
Check Stock

CULPFUN S9 Laser Engraver 90W Effect High Precision CNC Laser Cutter and Engraver Machine Deep Cutting for 15mm Wood 0.06mm Ultra-Fine Fixed-Focus Compressed Spot,

  • ☑️【90W Effect Laser Beam Shaping Technology】SCULPFUN S9 laser engraver uses the latest 5.5W laser beam shaping technology diode laser, it has....
  • ☑️【Solid & Easy-assembly Structure Design】The Laser engraving machine full-metal structure design makes the machine extremely solid, and it....
  • ☑️【Safety Protection Design】The laser cutter and engraving machine is equipped with a very convenient power switch, which is not available in....
  • ☑️【Wide Compatibility】SCULPFUN S9 laser cutting machine compatible with various mature engraving software, such as LaserGRBL, LightBurn,....
  • ☑️【Fast Focusing & Quality Assurance】The S9 laser engraving combines a fixed focus lens and a sliding design. You only need to slide the laser....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine, 5.5-7.5W Laser Power, DIY Engraver Tool for Metal/Glass Etching Kit/Wood Carving, Engraving Accuracy 0.01mm, Area(15.74\x16.14\)

  • First Choice for Creative: LATITOOL F50 laser engraving machine can engrave various materials like metal, wood, bamboo, plastic, leather PCB board, aluminum oxide, lacquered metal, etc. You can create your own engraved work for your favorites, realize your imagination..
  • Excellent Laser Engraving Technology: LATITOOL F50 laser cutter with 5~5.5w output power with 0.08mm ultra-fine compression laser focus area, the engraving accuracy reaches 0.01mm, which makes more refined engraving process, it makes easy cut on wood and acrylic..
  • 180° Panoramic Visible：UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks producing..
  • Solid & Easy Installation Structure Design: Industrial grade steel structure design makes the laser cutter and engraver machine more reliable and improves engraving accuracy. The entire engraver tool adopts a modular design, which is convenient for users to assemble, repair, replace and update laser engraving machine parts. And the assembly can generally be completed within 10-20 minutes..
  • Large carving Area: 400*410mm (15*16 inch) Large engraving range to meet various DIY....
Check Stock