Top Aem Fuel Rail

Ge WJ26X10356 Room Air Conditioner Display Board Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including.
  • AEL18DQQ1,AEL14AQL2,AEL14AQL1,AEW14ARL1,AEW18DQQ1,AEL18DPQ1,AEM14AQL2,AEM14APL1,AEM14AQL1,AEW18DSQ1,AEH18DPQ1,AEH18DQQ1,AEL14APL1,AEZ18DPQ1,AEM18DQQ1,AEM18DPQ1.
  • Display board WJ26X10356 displays the selections chosen for operation such as fan speed and operation mode.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Ge.
  • This display board (part number WJ26X10356) is for room air conditioners.
  • Unplug the room air conditioner before installing this part.
Check Stock

EVIL ENERGY Diesel Fuel Rail Pressure Plug Valve Compatible with Dodge 5.9L Cummins 2003-2007 213072800

  • INSTALLATION SITE AND FIT- EVIL ENERGY Fuel Rail Plug replaces the factory banjo bolt mounted on the top side of the pressure relief valve.Compatible....
  • Eliminate your stock pressure relief valve with this Fuel Rail Plug, which also prevents high-pressure fuel from being returned to the fuel....
  • APPLICATION-This is for maintaining fuel rail pressure under heavy acceleration. Also prevents bleed off overnight if the stock valve is stuck open or....
  • RIGID STEEL CONSTRUCTION: Each Fuel Rail Plug is constructed of stainless steel to avoid cracking and excessive heat expansion.Effective....
  • Weld-free construction that gives Fuel Valve better leakproofness.Threads in perfectly and doesn't leak..
Check Stock

JESBEN 5-Wire Upstream Air Fuel Ratio O2 Lambda Oxygen Sensor AFR Sensor 17025 Replacement for 300300 300310 - X Series AFR Inline Controller UEGO 0258017025 LSU 4.9 Wideband Sensor JSB-7025

  • Other Part Number:0258017025, 0 258 017 025, 0258017209,0258 017 029, 17025,30-4110,3888,AEM 30-4110, AEM 30-2004,AEM30-2004,AEM 30-0300, AEM 30-0310,170408,12575657,213-1572,17025.
  • LSU 4.9 wideband o2 oxygen sensor suitable for 2013 2014 2015 for Chevrolet Cruze 1.4L 1.8L 2.0L,2014 2015 for Ford Escape 1.6L 2.0L 2.5L Fiesta 1.6L, 2014 2015 for Honda Accord 2.0L 2.4L Civic 1.8L CR-V 2.4L Odyssey 3.5L, 2014 2015 for Toyota Camry 2.5L Corolla 1.8L RAV4 2.5L, for Audi VW Skoda Seat LSU 4.9 Wideband 0 258 017 025, for LM-2, LC-2, and MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1.
  • It also replacement for AEM Wideband Controllers with part numbers 30-4110 Digital Wideband UEGO Gauge, 30-0300 X-Series Digital Wideband UEGO AFR Gauge, 30-0310 X-Series Inline Wideband UEGO AFR Controller | Most 4.9 LSU Wideband Controller Gauge..
  • NOTE:This is a new type of probe and the probe is different from the original probe, but the quality will be better. And this oxygen sensor is not the original Bosch. Pls check it clearly and confirm it before purchase!.
Check Stock

Design Engineering 010378 Fuel Rail and Injector Cover Kit for Jeep (1997-2004, 4.0L Engine)

  • Designed for 1997-2004 Jeep models with inline 6 motor.
  • Reduces fuel rail and injector heat sink, reduces the chance of vapor lock, and keeps fuel cool.
  • Easy to install kit includes one manifold heat shield, one fuel rail heat cover, size fuel injector covers, and 12 fuel injector O-rings.
  • The heat shield is a glass fiber-backed heat barrier with thick aluminum skin.
  • The fuel rail and injector covers are designed to reflect engine heat.
  • the hook and loop design makes for easy installation.
Check Stock

AMS Black Fuel Rail Kit w/ Pulsation Dampener for 2008-15 Mitsubishi Evo X

  • The AMS EVO X Fuel Rail provides increased fuel flow which is necessary at higher boost levels. This CNC�d aluminum rail comes anodized in Red or Black and includes our signature AMS logo..
  • With a -6AN (7.5 mm) diameter inlet and outlet it dwarfs the stock rail by over 25% in flow area. This is true bolt on part that will install with your factory fuel lines, fuel pressure regulator and will work with all factory style fuel injectors..
  • Included in our kit is a -6AN braided fuel feed line that increases fuel flow by 25%. Our line also makes your car safer by eliminating the hard factory fuel feed line that can crack over time from engine vibration..
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

PPE 50-STAGE LEGAL Replacement Fuel Valve 113073000 & Viton O-Ring 113073001 Compatible with 2004.5-2010 GM 6.6 LLY/LBZ/LMM Duramax & 2007.5-2018 Ram 6.7 Diesel

  • California Air Resources Board Executive Order Number: D-701-12.
  • The PPE Replacement Fuel Valve (heat-treated stainless steel) replaces stock or a shimmed pressure relief valve. This valve helps maintain fuel rail pressure during high engine load conditions. It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient pressure relief valve spring pressure opening, returning fuel to the fuel tank..
  • Fitment: 2004.5-2010 GM 6.6L Duramax Diesel | 2007.5-2018 Dodge Ram 6.7L Diesel.
Check Stock

AEM X-Series Digital 52mm Gauge Set + Boost 35psi + Oil/Fuel Pressure 150psi

  • Two popular AEM gauges in a convenient combo set..
  • All gauges are brand new, complete in box. 52mm gauge diameter and slim 0.825” gauge depth..
  • AEM’s 30-0307 X-Series 150 PSI/10 BAR Digital Oil Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features!.
  • AEM’s 30-0306 X-Series -30in/Hg~35PSI / -1~2.5BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features..
Check Stock

AEM 30-3511 Infinity 6/8h Plug in Play Jumper Harness for 2003-2005 Mitsubishi Lancer Evolution / EVO 8 VIII

  • AEM’s Plug & Play harness for Mitsubishi Evo engines includes a Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor..
  • The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift..
Check Stock

AEM X-Series 52mm UEGO A/F Ratio w/OBDII Gauge Set + Boost 35psi + Fuel or Oil Pressure 0-150psi

  • Three popular AEM gauges in a convenient combo set..
  • All gauges are brand new, complete in box. 52mm gauge diameter and slim 0.825” gauge depth..
  • User selectable standard or metric display ( -30in/Hg~35PSI / -1~2.5BAR). OBDII pass through provides AFR readings through the factory ECU CAN-bus –....
  • AEM’s 30-0306 X-Series -30in/Hg~35PSI / -1~2.5BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of....
  • AEM’s 30-0307 X-Series 150 PSI/10 BAR Digital Oil Pressure gauge combines incredible looks, increased readability and a multitude of new,....
Check Stock

GXP Fuel Rail Plug Compatible with 2003-2007 Dodge Ram 5.9 Cummins Diesel 2500 3500

  • The GXP fuel rail plug for your 03-07 Dodge 5.9L Cummins is designed to block-off your factory pressure relief valve found on your 5.9L Cummins. This....
  • Improves Engine Starting | Easily Replaces Stock Valve.
  • Prevents Low Fuel Rail Pressure | Seals In 30,000 PSI Rail Pressure.
  • Eliminates P0148, P0192, P0087 DTC Codes | Replaces OE Part# 3947799, 1-110-010-029.
Check Stock

ICT Billet LS Fuel Rail Spacer Kit Compatible with LS1 Jetronic/minitimer/EV1 Injectors on LS3 Intake Manifold Designed & Manufactured in the USA 551307-105

  • Spaces the fuel rail to fit taller fuel injectors in factory fuel rail by extending the mounting boss.
  • Compatible with LS Truck/SUV intake manifolds/fuel rails when using LS1 fuel injectors (Jetronic/Minitimer/EV1).
  • Made in Wichita, Kansas from Aerospace Grade, USA Produced, Billet Aluminum.
  • Included in the package are 4 bolts, and 4 spacers.
Check Stock