Top Aggregate For Concrete

Starrett KD0600-N 6-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

LTM CONCRETE Dually Rebar Chairs (12 Pack) – 7 Heights in 1 Chair - Quick, Easy & Versatile Support – Vertical & Horizontal Applications – Made in USA

  • EXTREME VERSATILITY: The patented Dually is the only rebar spacer of its kind – one chair holding bars at many different heights! Clips will firmly hold #3-6 bars at 1”, 1 ½”, 2”, 2 ¼”, 2 ½”, 3”. Turned on its side, Dually will support any resting mesh or bar at 2 inches (up to #12)..
  • WIDE BASE: Works on grade, Dually features a wide base that prevents sinking and tipping on soft surfaces. It also includes plenty of flow-through spacing for aggregate and concrete..
  • HEAVY DUTY: This chair is made with a special blend of materials that support heavy loads and strengthen your pour. Our chairs will never rust, corrode or degrade inside the concrete..
  • EASY TO USE: Set an entire rebar grid in just minutes and eliminate the need for wire-tying. Dually is already low-priced, but you’ll save even more in labor costs..
  • MADE IN USA: The entire LTM Concrete product line is made in the USA, including 100% of our raw materials. Buy LTM and keep America working..
Check Stock

Zep All-Purpose Cleaner With Vinegar - 1 Gallon (Case of 4) R48410 - Gentle for Everyday Use

  • NOTE: THIS PRODUCT REQUIRES SIGNATURE UPON DELIVERY.
  • Construction Grade Pressure Wash removes tough oil stains, dirt & grime.
  • Best for use on: Concrete, Brick, Asphalt & Aggregate Surfaces.
  • Cleans walkways, patios, driveways & parking lots.
  • Not For Use On: Wood, painted, sealed or stained surfaces that will not be refinished.
Check Stock

Starrett KD0414-N 4.1/4-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

Delta Diamond Cougar HS 14 Inch 3-Pack Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\ 3pcs)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 3 Pack of 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond bet....
Check Stock

Starrett - Sta-0329 KD0500-N 5-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

MKT Polyester Liquid ROC 300 Capsule Anchor, 1/2\ Diameter x 6-1/4\ Length, 3/4\ Hole Diameter (Box of 10)

  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener.
  • Sand and aggregate mixture is closest to natural concrete.
Check Stock

MKT 3214000 Polyester Liquid ROC 300 Capsule Anchor, 7/8\ Diameter x 11-3/4\ Length, 1\ Hole Diameter (Box of 6)

  • Pre-measured adhesive of polyester resin base, quartz sand and benzoyl peroxide hardener.
  • Sand and aggregate mixture is closest to natural concrete.
Check Stock

Wej-It Nail-It DN1412 Drive Anchor Zamac Alloy Zinc Plated Finish Meets GSA FFS-325 Group V Type 2 Class 2 Specifications 1/4 Diameter 1-1/2 Length Pack Of 100

  • Drive anchor provides a secure hold in concrete, block, brick, and stone.
  • Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material.
  • Meets Fed. Spec. GSA FFS-325 Group V, Type 2, Class 2 specifications.
  • Ultimate tensile strength for a static load is 800 lb. in 3,000-psi unreinforced stone aggregate concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Goldblatt 3 Pieces Drywall Trowel, Carbon Steel Finishing Masonry Trowel Set Includes 14'' x 4'', 12'' x 4'', 8'' x 3'', Lightweight Wood Handle, Plastering Trowel for Sheetrock Wallboard Plasterboard

  • Sandblasting finish for antirust, strong and durable. Carbon steel anti-rust performance is slightly lower than stainless steel, PLEASE keep the trowel dry after use.
  • [Flat Blades & Square End Type] Flat blade makes applications easier with more consistent finish. Beveled working blade edges prevent aggregate popping, can be used for application, smoothing, polishing and shining.
  • [Ergonomics Handle] No-turn handle design, ergonomic, camel-back wood handle makes them comfortable to use for less hand fatigue. Strong aluminum mounting securely welding with blades for long lifespan.
  • [Size Include] 3 Pieces concrete finishing trowels set includes 14’’ x 4’’, 12’’ x 4’’ & 8’’ x 3’’ different sizes, meet your different using requirement, will make your lives on the installation job easier, more efficient and more profitable.
  • [Professional Grade] The Goldblatt Concrete Finishing Trowels are an excellent choice for concrete hand work. Classically styled with a traditional camel-back wood handle, this trowel has been the industry standard for decades, will last for years to come.
Check Stock

Haws 3150"Hi-Lo" Barrier-Free Concrete Pedestal Drinking Fountain with Exposed Aggregate Finish

  • Adjustable design allows the arm to be mounted at adult or child height as required by ADA.
  • Vibra-cast concrete with wire reinforcement and exposed aggregate finish offers an extremely solid and highly protected fountain.
  • Maintenance is made easy with front access to valve adjustment and cartridge replacement.
  • hood extension protects the bubbler head with a partial enclosure, for a greater protected drinking point.
  • Simplistic Portland gray cement creates just the right amount of appeal for an outdoor fountain.
Check Stock

Erie Tools 14\ Stainless Steel Hot and Cold Pressure Washer Surface Cleaner with Wheels No Handle 4000 PSI 4 GPM

  • Erie Tools 14-inch stainless steel flat-surface cleaner pressure washer attachment is designed to clean large, flat surfaces.
  • Maximum water temperature of 210 Degrees F, making it ideal for hot- or cold-water applications.
  • Versatile cleaner with wheels will tackle most surfaces with ease including aggregate, stamped concrete, and other textured flat surfaces.
  • Stainless steel housing is built to withstand the toughest abuse for a long operating life.
  • Cleaner has a 1/4-inch Quick Connect inlet for use with any standard wand and trigger gun.
Check Stock