Top Air Angle Head Drill

3 Pack 1/4 Inch Hex Quick Release Magnetic Screwdriver Drill Bit Holder Extension Set + 1/4\ 3/8\ 1/2\ Inch Socket bit Extension Bar Hex Shank Adapter Drill Nut Driver Power Drill Bit Repair Tools Kit

  • Function: It can be connected to an electric drill, a charging drill or a manual wrench, which can extend to a narrow space where they can not reach, and then twist the screw..
  • Features: Suit for all drill and socket wrench, functional head carries with a magnetic device, which can be connected to standard 1/4 hexagonal head.Size: 5.6 * 3 * 2.1 cm.
  • Easy & fast: connect to the standard hex screwdrier,Durable and lightweight..
  • It's good for the wrench: can be connected to drill, rechargeable drill or manual wrench.Fits: 1/4" 6.35mm hex drill bit screwdriver.
  • Package included: 1 x 105°Angle 1/4" Extension Hex Drill Bit Screwdriver Socket Holder Adaptor,Turning head screwdriver.
Check Stock

Kingson 30 45 90 Angled Drill Guide for Cable Railing, Drill Block Guide for Angled and Straight Holes, Drill Jig with Hard Steel Brushings for Installing Deck/Porch/Stair Railings,Handrails

  • Precise 3 Angles: Our cable railing drilling guide fixture can drill 30 °, 45 ° and 90 ° angle holes for your wooden stair railing and deck column. The three angles are fixed and accurate. You can use the impact drill to drill 30 °/45 °/90 ° angle holes on the column or railing, so that you can quickly and accurately complete the drilling work..
  • 4 Different Sizes Holes: There are four drill pilot holes of different sizes at each angle on our fixture, which are respectively 3/8 "(9.52mm), 5/16" (7.93mm), 1/4 "(6.35) mm), and 3/16" (4.76mm). Different sizes are applicable to cable protective sleeves and square head screws of different diameters..
  • High Quality Material: The cable railing drilling fixture is made of high quality aviation aluminum alloy, hard and light, easy to carry, free to store without deformation. The anodized blue surface maintains excellent smoothness, corrosion resistance and full reliable durability. The guide hole of our drill bit guide is equipped with a rigid and strong steel drill sleeve, wear-resistant, durable. No need to worry about the drill sleeve hole becoming larger and losing accuracy..
  • Wide Application: The drilling guide fixture can be used with C-clamp and F-clamp to improve drilling accuracy. It is applicable t....
Check Stock

Bobique 0.8-10mm Right Angle Bend Extension 90 Degree Professional Cordless Drill Attachment Adapter

  • 【Quality material】These impact grade driver sockets adapters are made of chromium vanadium steel, and have strength and wear resistance, which are strong, stable, and not easy to break so that you can keep them for a long time.
  • 【105° Right Angle Drill Attachment】It comes with a 105° right angle drill bit, suitable for drill bits, cordless drills or hand wrenches and screwdriver chucks. Made of high-quality aircraft carrier steel raw materials, fast, high-hardness angle steel drill frame, quick replacement, rust-proof. Specially designed for computer cases, electrical cabinets and other screwdrivers that work in tight spaces.
  • 【105° Right Angle Drill Attachment】It comes with a 105° right angle drill bit, su....
Check Stock

Shower Head Holder Adjustable Handheld Showerhead Holder Bathroom Wall Mount Shower Arm Bracket

  • ✔【High Quality】-Shower head holder is made of plastic ABS, which is durable, non-rusting and not easy to break, long life to use..
  • ✔【Easy to Install】-The whole process you can finish in seconds. No drill holes needed, no damage to your wall. Clean the surface and do keep dry before sticking on, peel off the cover on the back, stick it to the surface and push hard to remove the air. Suggested waiting for 24 hours to make it more stable and reliable..
  • ✔【Strong Adhesion & Adjustable】-The holder is made of strong adhesion sticker and special designed swivel adjustable holder part, which can provide extra strength and make you could easily adjust the angle of the shower head to comfortable position you want..
  • ✔【Wide Application】-The adhesive shower head bracket is suitable for a variety of smooth marble, metal surface, plane ceramic tile, smooth glass. Please DO NOT put it on the concave tiles, rough wood, lime wall, painted wall, dry wall rough surface or wall paper with textures..
Check Stock

Adhesive Shower Head Holder Wall Mount Handheld Shower Head Bracket Bidet Shattaf Spray With Hanging Hook Adjustable Handheld Shower Head Wall Mount Showerheads Holder With Adhesive 3M Stick Disc

  • Strong Adhesion And Adjustable Shower Head Holder--Our adhesion shower head holder made of Strong 3M adhesion sticker and special designed swivel adjustable holder part, makes you could easily adjust the angle of the shower head to any position you want. And we designed a hanging hook to hang the towel and shower balls when you take shower..
  • Durable Shower Wand Holder--Made of advanced waterproof space ABS and the backing is not metal, but it is a paper-like flexible composite designed to bond the adhesive to the main structure of the stent.Appearance color matches most shower hose colors, silver looks more noble in your bathroom, Modern clear designed, Ensuring quality and longevity..
  • Easy To Install--Clean the target position Peel off the protection cover at of shower hose holder, press and squeegee air from center to the edge and stack mount the back part and shower holder part with the snap joint. Keep it dry for 12 hours before hanging things or put on the shower head. No need to drill, even the whole process can be done in a few seconds..
Check Stock

GreaTalent 25in1 S2 Steel Mini Ratchet Wrench Screwdriver Bit Set with 1/4\ Hex Shank Phillips/Slotted/Hexagon/Torx Bits, 36-Tooth Gear, Magnetic Bit Holder, 90 Degree Offset Reversible Drive Handle

  • Powerful Function: Strong magnetic,can suck the screws easily when used it..
  • Uses: The ball head is an upgraded version of the hex head, which overcomes the dead angle problem when used..
  • Wide Using Application: Can be used for manual electric screwdriver, screwdriver, drill, air and other tools..
  • S2 High Quality Steel: Made of high quality S2 steel, heat treated for durability, hardness reaches 60HRC..
  • Exquisite Workmanship: Each edge can be accurately locked screws, no damage to the screw, and the screwdriver head..
Check Stock

Capri Tools 1/2 in Flex-Head Air Angle Impact Wrench 400 ft lbs.

  • The Flex-Head Angle Series Air Angle Impact Wrench features a 120-degree flexible head in an ultra-compact form factor 3.34 in deep and 2.55 in wide,....
  • 120-degree flexible head, tiltable up to 60 degrees forward and up to 60 degrees backward, combined with a 360-degree rotatable trigger lets you....
  • Ergonomic soft grip handle. One hand operation with large forward/reverse thumb dial.
  • 400 ft. lbs. of maximum reverse torque and 333 ft. lbs. of forward torque, 2X more powerful than other air angle impact wrenches.
  • Quiet operation at 91.2 dBA. Low air consumption at only 4 CFM at 90 PSI. Weighs only 2.94 lbs. Comes with 1/4 in. NPT air inlet.
Check Stock

OFNMY Cordless Right Angle Drill Attachment Adapter 90 Degree Handle Chuck 3/8' Keyed Chuck 8mm Hex Shank Power Tool Accessory (Jaw Chuck Range/1.0mm-10mm)

  • [Heavy Duty Right Angle Drill] Made of aluminium with a heat treated steel shank, and full metal aluminium casing with metal gears for strength and durability.
  • [8mm Hex Shank] Suitable for hand or power drills, including portable electric drills, sanding or buffing attachments.
  • [10mm(3/8″) Chuck] Jaw chuck range:1-10mm, with a key to tighten/loosen it, Max. 1500RPM with 25N·m torque.
  • [90 Degree Handle Chuck] Right angle drill attachment can make drill power swerve 90°and get to hard-reached places, design for the professional kitchen fitter, joiner or construction worker.
  • [Simple to Install & Operate] 155mm length metal handle for stable, fits in virtually any drill, air, electric, cordless etc..
Check Stock

[5 in 1]Swaging Tool Copper Tube Expander Manual Copper Pipe Swage Too Expander Drill Bit Soft Copper tubing Tool bit with for HVAC Repairing Air Conditioner

  • Material:This Manual tube expander is bearing steel material, blackened surface treatment process to prevent pipe drill bit rusting..
  • Contains: 6pcs hexagonal handle tube expander + 5pcs bell mouth expander,Air Conditioner Copper Tube Expander Tool Drill Sets.
  • Specifications: 7/8 (22.2mm), 3/4 (19mm), 5/8 (15.9mm), 1/2 (12.7mm), 3/8 (9.5mm), 1/4 (6.3mm).
  • Function: When the air conditioner is installed, expand the copper pipe to make the two copper pipes interconnected. (It needs to be installed on a hand electric drill).
  • Operation method: according to the expanding pipe diameter, select the corresponding expanding head and install it. In order to prevent the edge of the pipe from cracking, the tip of the expanding head should be used to expand the pipe. Then insert the whole expanding head into the copper tube and apply force evenly until the cup mouth is formed..
Check Stock

YON.SOU. Air Die Grinder - 1/4\

  • ⚙️ 90 DEGREE ANGLE HEAD: The right angle die grinder is ideal to work in tight spaces where a straight die grinder can not reach. The right angle style makes it easy to maneuver and precise to control with a clear view of working surface. You wouldn't worry about tight spaces and small jobs anymore with this 90 degree die grinder..
  • ⚙️ POWERFUL AND DURABLE: The pneumatic die grinder features a 0.3 HP motor whose free speed could be up to 20,000 RPM. Inner movement part is made of tungsten steel which could be more resistant to high temperature to prevent overheat. This 1/4" die grinder has long service life with aluminum housing and ball bearing construction..
  • ⚙️ COMPACT&LIGHTWEIGHT DESIGN: The compact and lightweight designed pneumatic angle die grinder is super easy for maneuverability and brings more accuracy, ergonomic designed die grinder body is perfect for one-handed grip. The 90 degree angle head brings more accuracy and possibility to those tight spots and hard reaching jobs..
  • ⚙️ SAFE&EASY to USE: The safety lock of the air angle grinder could prevent accidental engagement, you wouldn't get hurt even if you just start to learn to use the air die grinder. The air inlet filter could keep the die grinder from contamination. Bui....
Check Stock

JET JMD-15 Mill/Drill Machine with R-8 Taper 1Ph 115/230V 350017

  • One-piece cast iron column for added support.
  • Positive quick-stop knob and easy to read internal depth gauge.
Check Stock

NEIKO 30084A Right Angle Air Drill | 3/8” Drive Reversible Pneumatic 90° Gun

  • [VERSATILE]: Ideal for sanding, sawing, grinding, drilling and other related activities..
  • [COMPACT]: The 90 degree right angle air drill makes for easy work in confined small spaces that can't be reached with regular drills..
  • [CONVENIENT]: Lightweight, ergonomic design makes for great comfort while only weighing in at two pounds for less hand fatigue, rear exhaust allows the debris to blow away from your face..
  • [VERSATILITY]: Reversible air drills are great for close clearance operations and service work with low profile..
  • [SPECIFICATIONS]: the air drill runs a free speed of 1900 revolutions per minute (RPM), 90 PSI, 4 CFM, 3/8" hose size, and 1/4" NPT inlet size..
Check Stock