Top Air Brake Quick Connect Fittings
Lisle 22920 8 mm Low Profile Jiffy-Tite Disconnect Tool
- Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more.
- Smallest size also works on automatic adjusting air suspension systems for automobiles.
- Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment.
- Also disconnects other quick connect push-in fittings, including: flow control valves, check valves, shuttle valves, quick exhaust valves and other function control fittings in compressed air systems.
- Each tool is double-ended to disconnect air lines even in hard-to-reach areas, angled end allows maximum leverage, smaller end fits in tight spots.
- Set comes with five popular sizes: 1/8"-5/32.
Check StockATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs
- ...which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
- Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. But if 0.8L is not enough, remember to add new oil in time.
- Easy To Use: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
- Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
- Specifications and Accessories: 34 oz used fluid bot....
Check Stock3/8 Air Fittings Push to Connect Fittings,CEKER 3/8 Inch Tubing Od x 3/8\ NPT Thread Male Pneumatic Fittings Air Line Fittings Quick Connect Push in Connectors 5Packs
- Type:3/8" Od x 3/8" NPT Male Push to Connect Fittings.
- 3/8 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing).
- 3/8 Quick Connect Fittings Working Pressure:0-1.0mpa | 0-150psi.
- 3/8" od tube Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
- Working Temperature: 0-60°C | 32~140°F.
- Push to connect air fittings 3/8 is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check StockCEKER 1/4 Tube Fitting Push Connect Pneumatic Fitting,PC 1/2\ Tube Od x 1/4\ NPT Thread Male Straight Union Air Fittings Push in Fitting Quick Release Pneumatic Connectors 2Pack
- Type:1/2" Od x 1/4" NPT Male Push to Connect Fittings.
- 1/4 inch Air Fittings Fluid Admitted: Air, Water (No Freezing).
- 1/4 Quick Connect fittings Working Pressure:0-1.0mpa | 0-150psi.
- 1/2" od tubing Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
- Working Temperature: 0-60°C | 32~140°F.
- 1/4 Push to connect air fittings is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check StockCraftsman 20-pc Air Accessory Kit (CMXZTSG1139NB)
- Starter Kit: includes essential accessories needed to equip a new air compressor.
- Applications: Attachments included for inflating tires, sport balls and air mattresses.
- connecting compressor to air hoses and air tools.
- Recoil hose connects to all included accessories with included quick-connect fittings.
- Specifications: standard 1/4-inch NPT male or female threads.
- Includes: recoil air hose, 2 - sport ball inflation needles, blow gun, safety nozzle, rubber nozzle, tapered nozzle, blow gun nozzle adapter, 2 - 1/4-in female brass quick-connect couplers, 3 - male steel quick-connect plugs, 2 - female steel quick-connect plugs, dual-chuck tire inflator, 1/4-in male adapter, 1/4-in female adapter, tire pressure gauge, and thread sealant tape.
Check StockOEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle w/ Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding (Packaging May Vary)
- RELIABLE BRAKE BLEEDING TOOL: Our brake fluid bleeder kit features a reliable magnet for one-man operation.
- Designed for use on calipers, wheel cylinders, and master cylinders to give you the most effective brake line bleeder kit for your budget.
- NO MESS BRAKE BLEED: Get a tight fit over calipers with our tapered fittings and transparent brake bleeder hose of our brakes bleeder.
- The transparent brake bleeder tubing ensures that you’ll know when the brake line is running clear and air-free.
- ONE MAN OPERATION: No need to use the two-person method for your brake bleed.
- Attach the one person bleeder's reservoir to the rotor or similar metallic vehicle surface with the strong magnetic attachment and pump the brake.
- DURABLE BRAKES BLEEDING KIT: The quality construction of our 2 piece design gives you a durable no-mess operation.
- Bleed brakes while keeping everything clean of caustic brake fluid.
- Our handy reservoir makes disposal of brake fluid quick and easy.
- FITS MOST VEHICLES: Our specially tapered fittings work on most vehicles.
- The hoses hold firmly to the durable brake bleeder bottle and tapered fittings to create a no-mess operation that keeps your components clean of brake fluid.
Check StockJACO CobraFlow Polyurethane Coiled Air Hose Kit - 1/4 x 30 ft | with Air Compressor Fittings Storm Gray
- Superior Workability - engineered with our flexible, lightweight, & durable polyurethane coiled tubing that stays kink-free and uncoils from 1.5 ft....
- Flexible & Lightweight - stronger & more flexible than PVC and plastic air hoses, and more lightweight & portable than rubber and hybrid air hoses -....
- 1/4" Air Hose Fittings - quick-connect to your air tools & accessories with our included air fittings kit that includes a universal quick connect....
- Quality Storage Bag - using an air hose shouldn't be frustrating. Our poly air hose is easy to move around, and will effortlessly uncoil to any length....
- Lifetime Warranty - upgrade your air compressor tools & accessories setup with the CobraFlow Recoil Air Hose Kit by JACO. Approved for indoor and....
Check Stock2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS
- ...s .810" thick x 12.19" O.D. rotors with hats, Red Dynalite 4 piston calipers, drum parking brake assemblies with caliper mounting brackets, bearing retainers, BP-10 brake pads, and hardware..
- *Front & Rear Flexline Kits with steel braided brake lines, caliper fittings, & chassis fittings to connect the calipers to the hard lines *Rear Hard Line Kit with steel hard brake line tubing to connect the chassis fittings to the included rubber hose, which connects those hard lines to the line on the frame *Rear Parking Brake Cable Kit, which connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission.
Check StockUtah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)
- SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
- Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
- Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
- It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
- this enhances the installation of the push connect fittings process in a narrow space.
- These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....
Check Stock5 Pieces Pneumatic Ball Valve Push to Connect Fittings Ball Valve PVC Air Flow Control Valve Air Fittings Straight Quick Connect Union Air Quick Connect Air Hose Fittings (1/4\ x 1/4\ OD)
- Size Information: you will receive 5 pieces of black air line valves, classic combinations can meet your daily use.
- At the same time, the size is 1/4 inch OD, please read our information sheet and consider whether the size fits.
- Quality Material: pneumatic fittings with reliable plastic materials and copper, not easy to fall off after connection.
- They don't break easily, and have nice sealing performance, not easy to leak.
- Air valve can be applied for a long time.
- Working Pressure: quick connect tube fittings can be applied to water (maximum pressure: 50 PSI) and air (maximum pressure: 145 PSI).
- When be applied with water, the pressure shall not exceed 50 PSI, and operating temperature: 32 to 140 Fahrenheit.
- Easy Operation: after installation, you can freely change the direction of the push to connect fitting without manually inserting or pulling.
- They are easy installation, flexible, save space, freely rotate, release ring ellipse design, easy disassembly.
- Wide Applications: quick connect air hose fittings are suitable for air duct, pneumatic tools and so on, you can use them to connect others and different pneumatic components.
- They are suitable for PU/ PA/ PE/ PVC products.
Check StockCGELE 60Pcs Quick Connect Air Hose Fittings 4/6/8/10/12 mm Quick Release Pneumatic Push to Connect Fittings Kit Air Line Fittings for 5/32 1/4 5/16 3/8 1/2 inch Tube, PU Kit(MM)
- ♥【What You Get】5 Quick connect air hose fittings model from 4mm,6mm,8mm,10mm,12mm(each 12 pcs),60pcs in total.These are perfectly sufficient for you to choose.
- ♥【High Quality】These air fittings are made of high quality plastic and are widely used for automatic industry, workshop equipment, auto repair ,decoration spray paint, woodworking, dental equipment, etc..
- ♥【Convenience】Quick connect air hose fitting is easy to install, flexible, space saving, 360 degree free rotation, and the release ring adopts oval design, which can be easily removed..
- ♥【Wide range of fittings】Wide range of fittings of 4mm,6mm,8mm,10mm,12mm,suitable for 5/32.
Check StockTerisass Bleed Screw M10 1.0mm Motorcycle Brake Master Cylinder Bleed Screw Aluminum Nipple Banjo Bolt with 2Pcs Washers & O-Ring Kit Universal(Black)
- 【Why do you need it】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Replacement bleed nipple for the front or rear brake lines..
- 【Banjo Bolt Bleed Screw】M10x1.0mm Motorcycle Brake Braking Caliper Bleed Screw Nipple with Dust Cap.
- 【Fitment】:Also be fitted to back of the master cylinders to bleed out trapped air. Easy installation, suitable for many motorcycle applications..
- 【High Quality】:This bleed screw is made of high quality aluminum, anodized coloring for rust and corrosion resistance, not easy to deform, not easy to damage, rust and corrosion resistance, durable..
- 【Excellent Perforamnce】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Each component is precision-machined to exact tolerances for trouble-free.
Check Stock