Top Air Breather Cap - BuyWiseBest.com

Preform 302-440 Push-In Aluminum Valve Cover Air Breather Cap Recessed Red Oval

The top of each air breather cap is embossed handsomely with the ford racing emblem.
Package Dimension : 17.8 centimeters L x 7.6 centimeters W x 11.0 centimeters H.
Country of Origin: TAIWAN, PROVINCE OF CHINA.

The axle breather manifold is machined from billet aluminium and anodized, making it lightweight and resistant to the elements..
The manifold has 4 axle breather ports allowing for between 1 and 4 breather lines to be connected. It is very compact allowing it to be installed in....
The air filter is the ARB compressor air filter, which is a splash resistant air filter with a washable high flow sintered bronze filter cartridge..
8mm Polyethylene tubing is flexible, oil resistant, water resistant and heat resistant.8mm tubing has been selected over the standard 6mm tubing to....
The kit comes with self tapping screws, but the manifold mounting holes are large enough to allow mounting using an M6 (1/4 inch) bolt or stud, which....

❤【 Capture Oil & Keep Engine Clean 】----- The oil tank could catch the oil and moisture from PCV/CCV air, prevent misfires due to carbon....
❤【 Billet 6061 Aluminum 】-- Oil catch can made of high quality aluminum for enhanced strength and durability, lightweight and suitable for....
❤【 Check oil level clearly 】----- Clear Tube Indicator is easy to check if the tank is full without disassembling it in order to remove excess....
❤【 Breather Enhance filtering 】 ----- Breather as a vent system, could traps oil and dust, allow air to escape freely which enhance filtering.
❤【 2 Types Of Easy Installation】----- Easy to install oil tank with or without breather, all for your option..

APPLICABLE GEARBOX TYPES: MT/manual gearboxes are available in red, blue, silver, and black. Inner diameter: about 13 mm/0.5 inch. Outer diameter: about 50 mm/2 inches. for crankcase vent filter for pcv breather filter.
APPLICABLE GEARBOX TYPES: MT/manual gearboxes are available in red, blue, silver, and black. Inner diameter: about 0 mm/1 inch. Outer diameter: about 50 mm/2 inches. for crankcase vent filter.
EXCELLENT FUNCTION: The car air filter can increase the intake air flow, filter the impurities in the air, make the engine breathe more smoothly, prevent the dust suspended in the air from being sucked into the cylinder, and reduce the wear of the piston group and the cylinder. for 7/8" crankcase vent filter for d16 valve cover intake.
UNIQUE DESIGN: The unique shape reduces the air intake resistance of the engine and improves the air intake and volumetric efficiency per unit time when the engine is running. for valve cover breather for k n crankcase filter.
HIGH-QUALITY MATERIALS: The car air filter is made of Nonwoven Fabric, which is very breathable, very durable, and has a long service life, which enhances the ability of car air filtration. for crankcase breather filter for 301 predator valve vent filter.

Kit includes: stock height baffled covers, chrome t-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stain.
Designed for use with OE specifications for fit and function.

These have an air inlet, an air outlet and an exhaust port..
Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
Has two 3/8" air ports and one 3/8" breather port. Comes with: 3/8" 3-Way Solenoid (2) 3/8" Male Straight fittings with 3/8" push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.

Chevy small block OEM style painted black steel valve covers fit 1958-86 Chevy 283-305-327-350 small block engines..
One cover has a single 1.25" breather hole, the other side has two holes (one 1.25" breather hole, and one hole for a twist-in cap..

Chevy small block OEM style painted orange steel valve covers fit 1958-86 Chevy 283-305-327-350 small block engines..
One cover has a single 1.25" breather hole, the other side has two holes (one 1.25" breather hole, and one hole for a twist-in cap..

Breather oil catch can: You can install the oil catch can with Breather Filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can, all for your option..
Universal: Air Breather oil catch can be applied to most cars, making sure there's enough room for installation..
Improvement: Updated the fuel hose to NBR. Built in dipstick to check fluid level without opening the can..
Size and Material: Diameter: 2.68in / 68mm. Height: 4.45in / 113 mm. The thread of the inlet and outlet is M16*1.5. Hose length: 31.5in / 0.8m. It's made of aluminium allow T-6061, please notice that aluminum alloy is easy to scratch, doesn't affect the usage effect..
EVIL ENERGY provide this product have 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Black satin with "Mustang Powered By Ford" logo.
Comes with PCV grommet, breather grommet and an original-style chrome push-on breather cap for 50-state emissions legality.

The top of each air breather cap is embossed handsomely with the ford racing emblem.
Package Dimension : 2.5 inches L x 6.0 inches W x 4.0 inches H.
Country of Origin: TAIWAN, PROVINCE OF CHINA.

These have an air inlet, an air outlet and an exhaust port..
Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
Has two 1/4"air ports and one 1/4"breather port. Comes with: 1/4" 4-Way Solenoid (2) 1/4"Male Straight fittings with 1/4"push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.