Top Air Compressor Desiccant Dryer

1/2 NPT HEAVY DUTY Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

  • PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES. 1/2" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
  • 175 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
  • STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 175 PSI. 5oz Metal Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Metal Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccan....
Check Stock

Plews & Edelmann 56-081 Desiccant Dryer , Black

  • Amflo compact desiccant dryers have been engineered to deliver extremely dry compressed air to protect pneumatically operated equipment from the adverse affects of moisture.
  • A regular filter and an oil removal filter should be used as a prefiltering system immediately ahead of the desiccant dryer - a regular filter may be required after the dryer to remove desiccant dust.
  • Features an aluminum main body, metal bowl with sight glass, 70 Micron porous polypropylene internal inlet filter, 40 Micron sintered bronze internal outlet filter, 300 psi Max pressure.
  • 1/2 inch port size, 1 qt capacity Steel bowl is rated at 250 psi at 120 degrees F.
  • for compressed air systems only - not for use with fluids.
  • When desiccant bead has changed Color from dark Blue to Pink the entire desiccant must be replaced or regenerated by placing it in a drying oven at 275 degree F until it turns dark Blue again.
Check Stock

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 3/4 AUTO DRAIN

  • 3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
  • 2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
  • STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
  • STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
  • STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.
Check Stock

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 1/2 AUTO DRAIN

  • 3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
  • 2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
  • STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
  • STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
  • STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.
Check Stock

1 Inline Compressed Air Regulator Filter Desiccant Dryer Moisture Separator 4 Stage In Line Air Filtration System

  • 1:" Inline Compressed Air Regulator Filter Desiccant Dryer Moisture Separator Trap Combo Inlet / Outlet: 1"" Female NPT (measures about 1" diameter) This is a directional flow unit that comes which markings showing how to install. 3 Stage Compressed Air Filtration 5 Micron (Removes Water Droplets / Debris) .01 Micron Oilesser (Removes Finer Droplets / Oil Droplets / Oil Aerosol) Desiccant Dryer (Removes Any Remaining Moisture / Vapor).
  • 1ST STAGE OF PRE-FILTER WITH 5UM FILTER ELEMENT TO REMOVE OIL, WATER & PARTICLES.
  • 2ND STAGE OF MICRO-FILTER WITH 0.01UM FILTER ELEMENT TO REMOVE 99.99% PARTICLES AND OIL..
  • 3RD STAGE OF DRYER WITH DESICCANT TO ABSORB THE LEFT WATER..
Check Stock

NANPU 3/4 NPT Industrial Grade 3 Stage Air Drying System - Particulate Filter Coalescing Filter Desiccant Dryer & Air Regulator Metal Bowl Auto Drain Suitable for Paint Spray＆ Plasma Cutter

  • 【Stage 2: Coalescing Filter】The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
  • 【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
  • 【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 3/4" NPT Fittings, 1 x Thread Seal Tape..
Check Stock

NANPU 1/2 NPT Industrial Grade 3 Stage Air Drying System - Particulate Filter Coalescing Filter Desiccant Dryer & Air Regulator Metal Bowl Auto Drain Suitable for Paint Spray＆ Plasma Cutter

  • 【Stage 2: Coalescing Filter】The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
  • 【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
  • 【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 1/2" NPT Fitings, 1 x Thread Seal Tape..
Check Stock

3 Stage Heavy Duty Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter 3/4 Npt Manual Drain

  • 3/4" Npt, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And....
  • 225 Psi Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your....
  • Stage 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed....
  • Stage 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil....
  • Stage 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5Oz Desiccant Beads In The Bowl. Beads....
Check Stock

Air Filter, 3/8" NPT wit Quick Release Bowl (Campbell Hausfeld PA212103AV)

  • Cleans air and removes water vapor at the point of use to help support applications that require oil-free, moisture-free air, like spray painting. 3/8″ NPT.
  • The cleaner/dryer system includes a quick-release bowl for easily viewing the fluid level.
  • An oil-removal filter traps 99.9 percent of all oil aerosols and a desiccant system removes water vapor.
  • The outlet screen keeps desiccant particles from entering the airstream, protecting air tools.
  • Uses Campbell Hausfeld PA2086 desiccant packs. Finish your projects faster and easier with Campbell Hausfeld – The Air Power Expert.
Check Stock

NANPU Zinc Alloy Desiccant Dryer Compressed Air in Line Filter Moisture Water Separator Poly Bowl 1/4 NPT

  • 【Designed for Drying】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
  • 【Zinc Alloy Body】Higher Hardness and More Compression Resistance than Aluminum Alloy and Plastic Materials..
  • 【Max Output Pressure】0-10 Bar (0-145 psi)..
  • 【Flow Rate】105 SCFM @ 90 psi (3000 L /Minute @ 6 Bar).【Temperature Range】 41-140°F（5-60℃)..
  • 【Accessories】2x 3.5oz (100g) Desiccant Beads Bag. 2 x 1/4" NPT Fittings, a pair of 1/4" NPT Brass Air Coupler＆ Plug Kit,1 x Thread Seal Tape..
Check Stock

Van Air Systems 80-1500 D8 Compressed Air Dryer, Includes 1 µm F200 Series After-Filter and 1 50 lb Dry-O-Lite Desiccant, No Power Requirement/Moving Parts, Outdoor or Indoor Installation, 50 CFM, 3/4\ NPT, White (Pack of 3)

  • Dew point suppression of 20⁰ F below compressed air temperature.
  • No moving parts. No power requirement. Consumes desiccant only when compressed air flows. Pressure loss of less than 1 PSI through the dryer. No purge air loss.
  • Includes model D8 dryer vessel, model F200-55-1/2-B-MD-PD6 after-filter, one 50 lb pail of Dry-O-Lite desiccant, mounting bracket, and manual ball valve for draining.
  • Dryer vessel is constructed and stamped per the ASME Code.
  • Best for spray paint equipment, media blasting, and air tools.
Check Stock

Van Air Systems 80-1501 D12 Compressed Air Dryer, Includes 1 µm F200 Series After-Filter and 3 50 lb Pails of Dry-O-Lite Desiccant, No Power Requirement/Moving Parts, Outdoor or Indoor Installation, 100 CFM, White (Pack of 5)

  • Dew point suppression of 20⁰ F below compressed air temperature.
  • No moving parts. No power requirement. Consumes desiccant only when compressed air flows. Pressure loss of less than 1 PSI through the dryer. No purge air loss.
  • Includes model D12 dryer vessel, model F200-100-1/2-B-MD-PD6 after-filter, three 50 lb pails of Dry-O-Lite desiccant, and a manual ball valve for draining.
  • Dryer vessel is constructed and stamped per the ASME Code.
  • Best for spray paint equipment, media blasting, and air tools.
Check Stock