Top Air Condition Enclosure

Rockville VS12K54 12" K5 1400w Car Subwoofer in Vented Sub Enclosure Box - 4 Ohm,Black

  • Rockville VS12K54 Single 12" K5 1400w Car Subwoofer Pre-loaded In Vented Sub Enclosure. Peak Power Handling: 1400 Watts. Program Power Handling: 700 Watts. CEA Rated RMS Power Handling: 350 Watts. Final Impedance: 4 Ohm. MDF enclosure. Bonded stapled and braced. Computer designed vents. Angled at 15 % for perfect bass alignment. High quality aviation grade tweed carpet. Satin Nickel speaker wire push terminals. Enclosure air space is 1.52 Cu Ft per sub.
  • Vent dimensions (inches): 2.25" x 7" x 8.5". Tuning frequency of enclosure: 35 Hz. 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire. 50 Oz High Quality Magnet. Cast Iron Basket With Black Sanded Finish.
  • Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Blue Stitching Cone Reinforcement Ensures Long Life. Polypropylene Dustcap. Gold-Plated spring loaded p....
Check Stock

SCULPFUN Laser Engraver Enclosure with Vent, Fireproof Laser Cutter Protective Cover, Smoke & Odor Insulation, Noise Reduction, Eye Protection, Suitable for Most Laser Engraving Machine, 700x700x460mm

  • 【High Strength Fireproof Material】The laser engraver enclosure is made of high-quality double-sided silicone coated Plexiglas fiber that can withstand temperatures up to 1832°F (1000°C) and is resistant to instantaneous high temperatures. Please watch the video, we tested with fire for a few minutes without any problem..
  • 【Large Size & Wide Applicability】Extra large space for laser engraving machine protection cover (700*700*460mm/27.5*27.5*18in). Higher than other laser enclosure, can be used for laser rotary roller engraving taller objects. Compatible with most engraving machines on the market, such as fiber/co2/k40 laser engraver, as long as the size is within this range..
  • 【Eyes Protection & Slanted Viewing Design】Laser cutter enclosure viewing window size 53x60mm (20.8*23.6inch), made of double-layer dark PVC material, which can reduce the blue light produced by laser engraving and protect your eyes. The beveled design of the laser enclosure allows you to better observe the machine operation, giving you a good laser engraving experience..
  • 【Noise Reduction, Smoke & Odor Insulation】The laser enclosure isolates 99% of dust particles, smoke, odors, and noise during the cutting and engraving process. Ensuring your safe and healthy laser ....
Check Stock

BBox E10SV Single 10' Vented Carpeted Subwoofer Enclosure

  • Pro Tuned 10”Single Vented sub woofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for high power or sound quality sub woofers..
  • CNC Miter & Dado design and construction for the ultimatein air tight precision fit of all parts which ensures a rattle and noise free environment..
  • Recessed Side Panels increases structural integrity,eliminates unwanted flex and vibration..
  • Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying processand help assure a no-leak, no-rattle air chamber..
  • Enclosure Dimensions Sub cut out:9.125”, mounting depth: 11.5”, Height: 11.75”, Width: 16.25”, Depth: 15.25”.
Check Stock

Atrend 10SME 10” Single Sealed / Shallow Mount Subwoofer Enclosure

  • Pro Tuned 10” Single sealed shallow mount subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for....
  • 1” High Grade MDF Front Baffle for Ultimate structural rigidity and no-flex construction. 0.51 Cubic Feet Net Volume internal air space is ideal for....
  • Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue..
  • CNC Miter & Dado design and construction for the ultimate in air tight precision fit of all parts which ensures a rattle and noise free environment.....
  • Enclosure Dimensions Sub cut out:9.125”, mounting depth: 4.5”, Height: 15.25”, Width: 20.125”, Depth: 5.125”.
Check Stock

Yottamaster Aluminum Alloy 2.5 inch USB3.0 External Hard Drive Enclosure for 12.5mm 9.5mm 7mm 2.5

  • 2.5 inch - 15mm and Down The aluminum 2.5" USB3.0 sata hard drive enclosure is suitable for 7mm, 9.5mm, 12.5mm, 15mm 2.5" hdd. It comes with two silicone sleeves. Note: Do not use the supplied silicone sleeves for hard drives over 9.5mm..
  • Built for Memories. Styled for Mac. Up to 4TB. Movies, music, and other travel essentials. Yottamater 2.5 hard drive enclosure adopt SATAIII protocol, transfer speed up to 5Gbps (MAX). Featuring versatile USB3.0 interfaces in an all-aluminum enclosure to meet your storage needs.Support UASP, which effectively reduce annoying waiting time..
  • No Cooling Fan Needed The 2.5" hard drive case adopt all aluminum design. Front and rear with large area cooling holes, which can speed up air convection and rapid cooling. Easy installation with included tools..
  • Great Compatibility The external 2.5 inch hard drive enclosure is compatible with Windows / Mac OS 10.8 and later / Linux systems.
  • Hot swap, plug and play. LED light help to monitor the working status of hdd..
  • What you will get 1x USB3.0 hard drive enclosure.
Check Stock

MERIC Hermit Crab Humidity and Temperature Reader, Black Analog Thermometer and Hygrometer for Terrariums, Color-Coded Sections, Measures in Fahrenheit and Percent, 1 Pc per Pack

  • 2-In-1 Measuring Device — A reliable gauge, Humidity and Temperature Meter for Hermit crabs by Meric will keep your little crawlers in optimal condition. This dual meter will allow you to monitor and maintain an ideal crabitat temperature ranging between 72° – 80° Fahrenheit and a humidity range between 70% and 80% moisture level..
  • Easy To Read Color-Coded Measurements — This measuring tool makes sure that you can visually check your terrarium’s condition even from a distance. When the moving pointer is heading blue, it means that the temperature is freezing, or humidity is extremely dry. On the other hand, the red indicator states it’s too hot, or the humidity level is heavy. Aim for the green level as it signifies that the enclosure is in perfect condition..
  • Ready To Use — This analog thermometer and hygrometer can function instantly. Its mechanical, physical sensor works by pulling the pointer during the expansion and contraction of the metal sheet while the temperature and humidity levels are changing..
  • Easy Set-Up — This device does not demand any complicated installation. When you release the convenient latch attached to its body, it can easily support itself. Place it on the desired location or any surface in your tank and you are....
Check Stock

Rockville DK58 Package Dual 8 1600w Loaded K5 Car Subwoofer Enclosure+DB11 Amp

  • Loaded Sub Enclosure Features: Final Impedance: 2 Ohm. Peak Power Handling: 1600 Watts. CEA-2031 Compliant RMS Power Handling: 400 Watts. ¾” MDF....
  • Angled at 15 % for perfect bass alignment. High quality aviation grade tweed carpet. Satin Nickel speaker wire push terminals. Enclosure air space is....
  • Tuning frequency of enclosure: 37 Hz. 1.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice....
  • Amplifier Features: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote..
  • CEA Compliant Power Ratings (Rated at less than 1% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such....
Check Stock

Xscorpion AP3.5 AeroPort 3" Molded Enclosure Port

  • Triple 12-inch Universal Fit Armored Series Ported Subwoofer Enclosure.
  • Gross Internal Air Space: 4.30 ft³ | Tuned at 37 Hz.
  • Engineered to Get Extremely Loud and Low - Triple Chamber Design with Kerf Ports.
  • Extremely Heavy Duty Enclosure with a Durable and Attractive Armor Coated Finish.
  • Subwoofer Hole Cut-Out Diameter: 11.125" | Mounting Depth: 7.625".
Check Stock

Taylor Precision Products 92688T 14\ Poly Resin Sea Oats Thermometer Outdoor-Clocks, Multicolored

  • Hanging Thermo-Hygrometer: 12 Inch outdoor thermometer hygrometer is used for monitoring weather conditions. The hook design on the back allows the indoor outdoor thermometer to be hung in the study, garden, courtyard, patio and other occasions.
  • Easy to Read: The outside decorative thermometer consists of a stainless steel enclosure, glass lens, black bold numerals, red pointers, and a minimalist white dial. At a glance, it is clear that can be clearly read from a distance.
  • Measurement Range: This wall thermometer outdoor accurately measures temperature and humidity simultaneously, measuring both Celsius and Fahrenheit temperature ranges between -40 and 140°F/-40 and 60°C for all climates, humidity ranges from 0 to 100%RH, to keep the garden in great condition.
  • Stainless Steel Enclosure: The stainless steel enclosure of the thermo hygrometer is hard, durable and will not rust. Even if you put the thermometer for home outside, you can use this large outdoor thermometers for patio for a long time without damaging the internal structure.
  • Automatic Calibration: This outdoor thermometers for patio large numbers weatherproof centigrade and fahrenheit with precision thermometer coil provides accurate readings. The thermo-hygrometer uses a built-in mechanical ....
Check Stock

JAYBRAKE Atrend-Bbox E12sv B Box Series Single Vented Subwoofer Enclosure (12)

  • Pro Tuned 12” Single Vented subwoofer enclosure designed for optimum bass response and low frequency reproduction.
  • CNC Miter and Dado design and construction for the ultimate in air tight precision fit of all parts which ensures a rattle and noise free environment.
  • Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly.
  • Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber.
  • Enclosure Dimensions Mounting Depth:13.875”, Sub cut out: 11.125”, Height: 13.625”, Width: 16”, Depth: 17.375”.
Check Stock

Mount-It! Anti-Theft Tablet Wall Mount for iPad | Secure iPad Wall Mount Kiosk | Locking iPad Enclosure for iPad 9.7 iPad 2, 3, 4, Air, 2 Tablets, iPad 6 (MI-3772B)

  • Secure iPad mount display – The perfect wall mount iPad kiosk for POS, check-in, Retail, hotels & trade shows.
  • unique locking system keeps your iPad safe.
  • Can’t touch This – tamper-proof iPad enclosure.
  • fully secured case with restricted pin-hole access to power & volume buttons and removable home button Blocker.
  • Works with iPad – locking iPad case designed to fit 9.7 inch iPads.
  • compatible with iPad 2, iPad 3, iPad 4, iPad 5, iPad 6, iPad Air, iPad Air 2 and iPad Pro 9.7 inch models.
  • Space saver – a low-profile locking iPad 9.7 wall mount with cable management fits every environment.
  • All accomplished by a form fitting enclosure that is less than 3/4 of an inch thick.
  • Easy & quick installation – a wall mount iPad VESA case installs in minutes.
  • flush mount this secure iPad enclosure – No additional bracket required.
Check Stock

Atrend SQ-15LSVDD Soundqubed-15 Soundqubed Single Vented SPL Sounqubed woofer Specific Enclosure Certified 15

  • SPL-Tuned 15” Single Vented subwoofer enclosure designed for optimum bass response and low frequency reproduction for Soundqubed subwoofers.
  • 3/4” High Grade MDF Construction for Ultimate structural rigidity and no-flex construction. 3.84Cubic Feet Net Volume internal air space is ideal....
  • CNC Miter & Dado design and construction for the ultimate in air tight precision fit of all parts which ensures a rattle and noise free environment.....
  • Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints....
  • Premium OEM Grade Carpeting for factory look and durability. Enclosure Dimensions Mounting Depth:14”,Sub cut out:13.75”, Height: 18.25”, Width:....
Check Stock