Top Air Drill Chuck

QLNE 5 Sizes Drill Chuck Key Wrench, Replacement Drill Press Chuck Key, Electric Drill Clamping Tool (Chuck Diameter: 3/4\ / 5/8\ / 1/2\ / 3/8\ / 1/4\)…

  • Material: The Drill Chuck Key Wrench is made of solid carbon steel and coated with durable plastic, which is anti-rust, anti-slip design, reducing stress damage within a certain limit..
  • Chuck Diameter: 3/4" (20mm), 5/8" (16mm), 1/2" (13mm), 3/8" (10mm), 1/4" (6mm)..
  • Function: The Replacement Drill Press Chuck Key is a kind of electric drill clamping tool, perfect to tighten or loosen a chuck, which allows a quick change of your drill bit heads..
  • Application: The Key Wrench is suitable for all heavy-duty chucks, and can be compatible with most of power tool brands..
  • Package Included: 5PCS Drill Chuck Key Wrench in total..
Check Stock

NEIKO 30096A 3/8\ Air Drill | Composite Reversible Pistol Grip with Keyless Chuck | 90 PSI / 1800 RPM

  • [APPLICATION]: Pneumatic drill is suitable for use on wood, composition materials, plastics, masonry, metal, and screws to be the perfect companion to the drill bits in your tool collection..
  • [ERGONOMIC]: Compact and powerful tool operates at 1800 RPM and has an easy quick one finger touch side-mounted forward/reverse switch for fast directional changes..
  • [QUALITY]: High quality pneumatic rotor and bearings offer smooth drilling operation in garage and construction environments..
  • [PORTABLE]: Convenient size, lightweight composite housing handles easily weighing only two pounds and includes a rubber pistol grip to reduce chill, vibration, and hand fatigue..
  • [LIGHTWEIGHT]: 3/8 inch no key chuck feature changes bits quickly during high speed drillings without manual tightening hassle..
  • [CONVENIENT]: Built-in handle exhaust with muffler connects to air compressors to reduce noise level output for better concentration..
  • [SPECIFICATIONS]: Chuck Capacity 3/8”, free speed 1,800 revolutions per minute (RPM), inlet size ¼” NPT, minimum hose size 3/8”, air consumption: 4.0 cubic feet per minute, air pressure: 90 pounds per square inch (PSI)..
Check Stock

ENGiNDOT Hammer Drill, 1/2-Inch 6-AMP Corded Electric Hammer Drill with 2800RPM, Variable Speed, Drill Chuck, 10 Drill Bits for Home Improvement, Concrete, Steel, Wood (NOT for Reinforced Concrete)

  • All Metal Chuck: The metal chuck is more durable and sturdy than the plastic drill chuck, with longer life time. Allowing you to change a variety of drill bits with ease. The maximum chuck diameter of this impact drill is 1/2'' (13mm)..
  • Hammer & Drill Function 2-in-1: Switch the orange button on the top to select hammer or drilling function by your tasks. Drilling function for drilling holes on steel plates, plastic and wood, hammer function provides greater impact to make the drilling task more efficient and simple on concrete wall and masonry. Please note that this drill can't be used in reinforced concrete walls..
  • Powerful Motor & Variable Speed: The ENGiNDOT PID01A Corded hammer drill equipped with high efficiency industrial copper core motor, gives more power and durability, designed with variable speed, you’re able to set a suitable speed for different applications from 0-2800rpm..
  • Lightweight & Ergonomic Design: This hammer drill for concrete has been designed with light weight of 4.5 lbs to ensure an easy operation and less fatigue for long drilling tasks. The compact design of this hammer drill e....
Check Stock

Campbell Hausfeld 3/8 Reversible Air Drill TL054500AV

  • REVERSIBLE DRILL - Quick reverse lever to easily change rotation. Assists when binding occurs or when removing screws..
  • DURABLE – Keyless chuck provides quick and reliable bit replacement..
  • AIR POWER - This air drill requires 5.2 SCFM of air at 90 PSI. Ideal for drilling holes in wood or metal..
  • EASY TO HANDLE – One-handed forward/reverse switch for fast direction changes and a comfort grip to reduce fatigue..
  • MULTIPLE USES - Use while building or repairing decks, fences, furniture, or similar equipment..
Check Stock

0.3-3.2 Clamping Grinder Chuck Key M8 for Car Garages(Short tail M8x0.75 chuck + rod set)

  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Warehouses Offices(Short tail M8x0.75 chuck + rod set)

  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Car Garages(Short tail M8x0.75 chuck + rod set)

  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Check Stock

Grinder Chuck Key Drill Chuck Carbon Steel M8 for Car Garages(Short tail M8x0.75 chuck + rod set)

  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
Check Stock

GALAX PRO Hammer Drill, 4.5A Corded Drill Impact Drill 0-3000RPM Electric Drill with 5 Drill Bit Set, Hammer and Drill Functions, 360°Rotating Handle

  • Hammer and drill function: Equipped with a green dual-mode selector on the top, you can easily convert between hammer and drill function by one button depending on your tasks.
  • 1/2 keyed metal chuck: This drill with sturdy and durable metal chuck, its maximum chuck diameter of this impact drill is 1/2''.
  • Customer could replace different drill bits according to different drilling materials.
  • Powerful motor: Features a 4.5 Amps copper motor to deliver a very nice performance at 3000RPM. Providing additional durability and overload production for drilling and chipping on wood, masonry, steel, wall, concrete and other hard materials.
  • 360 °rotatable handle: Working with the hammer drill is very pleasant due to the ergonomic and rubberized grip. The included 360 °adjustable side handle ensures the best possible control of the machine.
  • What you get: 1 x impact drill, 5 x construction drill bits, 1* auxiliary handle, 1 x chuck key, 1 x manual.
Check Stock

QWORK Drill Chuck Converter, 2 PCS 0.3-6.5mm Hex Shank Keyless Drill Chuck Quick Change Adapter Converter with 1/4\ Hex Shank

  • Installation size: General hexagon handle input connection rod clamps 0.3mm to 6.5mm drill bit..
  • Universal Hex shank: For power drill convert impact driver to hold non-quick change drill and driver bits instantly..
  • Ideal Accessor: Thread quick change adapter with 1/4" Hex Shank, easily into the power drill..
  • Easy to use: Easily lock and release drill bits, no chuck key needed..
  • Package include: 1* Black Drill Chuck + 1* Silver Drill Chuck..
Check Stock

JIECHENG 6 inch Hole Saw for Cornhole Boards,Metal,Drywall,Plasterboard,Wood and Plywood

  • High grade hole saw 6 inch with 3/8'' Hex shank Mandrel,the cutting depth is about 1.24 inch (32mm),it can make 6 inch diamteter holes..
  • Heavy duty for making Cornhole Boards,air ducts,ceiling light,speakers,duct work,it can drill in drywall,wood ,plastic, gypsum board,aluminium,soft thin metal and rubber. very useful for Interior decoration, DIY tools, downlight installation.
  • Good material:High Speed Steel M42 Bi-metal. with sharp teeth,cut the wood very easy and non binding clean edge..
  • Notice: Please keep safe when operate the drilling work. it is better firstly slow speed,then higher. wear safety glasses it important for safe of eyes. and big hole should be low rotation speed..
  • Rich configuration,Include 1pcs bimetal hole saw 6 inch,1pcs mandrel with pilot drill bit,1pcs extra pilot drill bit,1pcs wrench,1pcs spring..
  • This item is mainly for all kinds of woods and soft material, but not for thick steel plate..
  • The shank of arbor is hex,3/8"(9.5mm),it is distance between two sides. so it is for 10mm (3/8") drill chuck or larger chuck..
Check Stock

Carbon Steel M8 Easy to Use Grinder Chuck Key for 3-Jaw Mini Drill Bit(Short Tail M8x0.75 Chuck + Rod Set)

  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
Check Stock