Top Air Line Brass Tube Fitting

Jienk 5PCS Pneumatic Male Straight 1/2\ Tube OD x 3/8\ NPT Thread Push to Connect Air Fittings, Quick Connector for Air Ride Air Horn Air Compressor

  • 【Durable】This fitting has nickel plated brass body with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation, after installation, the tube direction can be changed easily. This fittings have hexagonal body allowing tightening with wrench, additionally can be screwed with Allen tool, which is especially convenient where there is limited access to installation place..
  • 【Wildly Application】 Working Temperature: 32～140°F. This male straight quick release air fitting is most used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, Industrial, Automotive Assembly, Printing, Packaging, Aircraft Controls, Textile. As well as moving parts such as cylinders, air bag and air suspension..
Check Stock

KOOTANS 15 Ft 3 in 1 Wrap Set, ABS Electrical and Rubber Air Line Hose Assemblies 7 Way Electrical Cable with Handle Grip for Semi Truck Trailer Tractor

  • THE 3 IN 1 AIR-POWER LINE CONTAINS: Service air line rate to -65F (-55℃), ABS power line (green) rated to -85F (-65℃) Emergency air line rated to -65F (-55℃). Fully enclosed in spiral wrap to prevent lines from becoming tangled. And it is more wear-resistant..
  • SIZE: 15 feet length, 1/2" brass fitting joint. Heavy duty 15 feet trailer air line & ABS wrap cord assembly..
  • SPRING JOINT: more durable, joint is not easy to damage. BRASS CONNECTOR: good anti-corrosive and anti-rust properties. Red and Blue handles for easy identification and quick connection..
  • ELECTRIC CABLE USE HIGH QUALITY COPPER, good heat and electricity conduction, safe and efficient..
  • REPLACES: Tectran 13S15401, Tectran 169157, Tremec Sloan 455180DSET, Tremec Sloan️ 451098, Philips 11-8115, Phillips️ 30-2171, etc..
Check Stock

UltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting

  • Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Check Stock

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
  • Bulkhead Fitting Type: Push In Straight Male Connector.
  • Body:Nickel Plated Brass Seal, O-Ring NBR.
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
  • Fluid Admitted: Air, Vacuum, Water (No Freezing).
  • Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.
Check Stock

Joywayus Compression Sleeve Ferrules 4mm Tube OD 2.9mm Tube ID Brass Compression Fitting and Insert Tube Ferrule Kit(Pack of 60)

  • Package include:30pcs sleeve ferrules+30pcs inserts..
  • Durable and high standard brass compression fitting..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
  • Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 1/8\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Beduan Brass BPL Push to Connect Air Fittings Elbow 1/4\ Tube OD x 1/8\ NPT Male 90° Degree Adapter (Pack of 5)

  • Type:Push in fitting/Push to connect /Size:1/4 " Tube OD x 1/8" NPT Thread.
  • Fluid Admitted:Air Vacuum Water (no freezing).
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC.
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass.
  • Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg.
Check Stock

Jienk 40PCS Straight Push Connectors, Quick Release Pneumatic Air Line Fittings for 1/4 5/16 3/8 1/2 Tube Emergency Repair Your Leaking Air Hose

  • 【Durable】This fitting has a strong PBT housing with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】 Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily..
  • 【Wildly Application】 Working Temperature: 32～140°F. This Straight Push Connectors kit is most commonly used in the field for low-pressure hydraulic and pneumatic systems such as general industrial maintenance and automotive assembly,as well as moving parts such as air brake, air compressor and air ride..
  • 【Flexibility】This combo concluded four different sizes of straight air line fittings(1/4,5/16,3/8,1/2), save you from varies emergency need, help you to repair your leaking air line..
Check Stock

Minimprover 12 PCS Brass Inverted Flare Brake Line Assortment (4 Unions 8 Nuts) Fitting For 3/16\ Tube (3/8\-24 Inverted Threads) Automotive Brake Line Systems

  • ★【Size & Material】: Heavy Duty Brass,strong and durable(Better Than Steel). Both the unions are 3/8-24 Inverted threads (regular 3/16 inch tube fitting size).
  • ★【Firm And Durable】: Minimprover Brass for corrosion resistance, high temperature ductility and low magnetic permeability. Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)..
  • ★【Fit For】: Most common inverted flare sizes for 3/16 inch tube (3/8"-24 Inverted Threads), for use with 3/16 inch steel, poly coated, Nickel Poly Armour, Cupronickel Tubing or copper brake lines..
  • ★【Inverted Flare Nut】: These unions nuts are the best option to join two 3/16 inch brake lines together..
  • ★【Package Include】: 8 PCS Flare Brake Line Nut and 4 PCS Union for 3/16" tube. Comes with 1 year warranty..
Check Stock

MuHize Brake Line Fittings - 15 Pieces 3/8 -24 Threads Assortment Brake Fitting for 3/16 Inch Brake Line Tube 5 Unions 10 Nuts

  • PACKAGE INCLUDE - MuHize upgraded Brake Fittings Replacement (Pack of 15): ① 5 x 3/8-24 threads unions.
  • ② 10 x 3/8-24 threads nuts. Note：Both the unions and nuts is 3/8-24 threads (regular 3/16 inch tube fitting size) . Please check before shopping!.
  • INVERTED FLARE UNIOn- Any 2 (3/16 inch) brake lines can be easy to joined with Muhize unions. both the sizes for unions and nuts are both 3/8-24 threads, which is the regular brake fitting size for 3/16 inch tube..
  • HIGHER QUALITY - MuHize brake fittings are made of durable brass with unique rust corrosion proofing technology..
  • WIDELY APPLICATION - MuHize 3/8' - 24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 3/16 inch brake lines tube..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. 100% brand new & made from excellent materials, and good contact..
Check Stock