Top Air Splicer

Dutton-Lainson 400 All-Purpose Fence Stretcher/Splicer, 1

  • Quickly tighten any fence such as high tensile, barbed wire, or smooth wire.
  • The original, U. S. made fence stretcher-splicer used by farmers and ranchers for decades.
  • Quickly tighten any fence - high tensile, barbed, or smooth wire.
Check Stock

Jake s Wire Tighteners Kit - 1/4 Bag of 20 and Jakes Tighteners Handle.

  • Quickly tighten any fence such as high tensile, barbed wire, or smooth wire.
  • The original, U. S. made fence stretcher-splicer used by farmers and ranchers for decades.
  • Quickly tighten any fence - high tensile, barbed, or smooth wire.
Check Stock

Klein Tools 2100-9 Stainless Steel Electrician's Scissors with Stripping Notches, 5-1/4-Inch

  • Cable Splicer Snips with stainless steel blades to maintain blade durability and sharpness.
  • Scissors with serrated teeth allow for non-slip cutting action.
  • Cuts electrical communication 19 AWG and 23 AWG wire, cable and cordage.
Check Stock

Joywayus 3/8\ ID Hose Barb Fitting Hex Union Brass Fitting Water/Fuel/Air (Pack of 5)

  • 【Material】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • 【Maximum Pressure】0~150Psi【Working Temperature】-40～160°F..
  • 【Packaging Includes】5 Brass Hose Mender with barb 3/8" x 3/8"..
  • 【Connections】Hose Splicer for connecting two hoses with the same diameter in a straight run..
  • 【Typical Application】Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines..
Check Stock

Fujikura FSM-70S Fusion Splicer Welding Splicer with CT-30 or CT50 Cleaver and Other Standard Accessories Multi Language

  • Package Accessories: FSM-70S fusion splicer Battery BTR-09 Battery Charge Cord, DCC-18 Fujikura Fiber Cleaver, CT-30 AC Adapter, ADC-18 AC Cord,....
  • Splices all known types of fibers. Fiber core alignment. Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB. Reduced....
  • Multi language, include 17 kinds language.
  • Reduced splicing time – 7 seconds only..
Check Stock

Vis Brass Hose Barb Fitting Splicer/Union/Mender 3/8 Barbed x 3/8 Barbed Fuel Line Connector Pack of 5

  • 3/8" barb splicer for connecting two hoses with the same diameter in a straight run.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Beduan Brass Hose Barb Reducer, 3/8\ to 5/16\ Barb Hose ID, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel

  • Material: Brass. Connections: 3/8" x 5/16".
  • Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check Stock

Quickun Hose Bard Fitting 3/4 x 3/4 Hose ID Brass Hex Barbed Splicer Mender Joint Adapter Union Fitting Pack of 2

  • Type: Barb Hose Splicer / Mender. Hose ID: 3/4".
  • Adapter for connecting a hose to a hose connection.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Beduan Brass Hose Barb Reducer 5/16 to 1/4 Barb Hose ID Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel 4Pcs

  • Material: Brass. Connections: 5/16" x 1/4".
  • Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check Stock

Legines Brass Hose Barb Fittings Assortment Kits Splicer + Male Coupler + 90 degree Male Elbow 65 Pcs

  • Splicer : 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5).
  • 90 Degree Male Elbow: 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT(4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNP(2) 1/2" barb to 3/8" MNPT(2).
  • Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2).
Check Stock

Quickun Brass Hose Barb Reducer 3/8 to 1/2 Barbed Reducer Fitting Reducing Splicer Mender Union Adapter for Air Water Fuel Pack of 3

  • Material: Brass. Connections size: 1/2" x 3/8".
  • Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check Stock

TEKTON 10-1/2 Inch Fencing Pliers | PSP10010

  • STAPLE AND NAIL PULLER: The parallel jaws can grip the crown of a staple or the head of a nail and easily pry them out.
  • WIRE SPLICER: Use the top and bottom jaws to isolate two strands of wire for splicing or separating.
  • the bottom jaws are large enough to grip and twist multiple strands of wire.
  • STAPLE STARTER: Use the two jaw openings to hold a staple in place and drive it with a hammer.
  • start a staple with one hand by gripping it in the upper jaws and swinging it into the post.
  • STRIKING FACE: The flat surface is less prone to chipping and deformation than a serrated surface.
  • hit the striking face with a hammer to drive the claw under a staple.
  • STAPLE CLAW: The longer, more pointed claw gives better access for prying out staples.
Check Stock