Top Air Tank Inlet Valve

Class A Customs 48 Gallon RV Waste Black Water Holding Tank 56 x 30 x 9 WT-4800

  • 48 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

MCAMPAS 350PSI Soft Nose P.O.L valve with 12 Feet Propane Weed Burner Torch Hose Adapter for Use Connects to U.S.Any Standard Propane Tank to Propane Weed Burner Torch Head Burner

  • ➤Suitable use fit American standard 5lb-100lb PPOL valve regulator propane tank, Converts POL LPG propane tank service valve connects to propane weed burner.
  • ➤12 Feet 350 psi high pressure propane hose can extend enough propane tanks to connect to propane torch weed burner to safely use the space.
  • ➤Propane weed burner torch hose adapter outlet joint is 5/8” parallel pipe thread Joint （3/8"-19 Left Hand Internal Thread.)compatible with standard propane torch gas burners whose inlet thread diameter is 5/8" adapter.
  • ➤The POL lp tank service valve propane hose adapter has passed CSA certification and has an internal overcurrent protection mechanism to prevent leakage. POL safety valve with handle (loose by turning right, tight by turning left) connects to any standard propane tank has lp tank POL service valve.
  • ➤It replaces the problematic propane hose adapter on the propane weed torch. NOTE:, before purchasing, please check whether the propane weed torch air inlet connector is compatible with the 3/8"-19 internal thread left-handed or joint thread diameter is 5/8" joint.
Check Stock

TCP Global 10 Gallon (38 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing Resin in Casting Molds

  • Professional heavy-duty 10 gallons (38 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds the air pressure constant at your regulated air pressure setting during the whole casting mold resin curing process..
  • The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 14.5″ inside diameter and is 17″ deep, so it has a large enough capacity to accommodate almost any casting project. Includes 4 removable caster wheels..
  • Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge from 0 to 100 psi, safety air relief valve and an air release outlet cock valve..
  • The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless resin castings..
Check Stock

Hitachi Pilot Unloader Check valve Combo for Gas Compressors 885426 EC2510E

  • Replaces Hitachi 885426 for EC2510E Gas Compressors 110 - 140 PSI Made in USA.
  • Check valve /Unloader valve / Pilot valve all in one - (continuous run unloader) for gas & electric powered air compressors.
  • 110 - 140 PSI factory setting. pressure can be adjusted 30-40 psi up or down.
  • 1/2" Metric Flare TOP Inlet x 3/8" Male Pipe Thread outlet to air tank.
  • 30 scfm Rating ! Pressure can be adjusted 30-40 PSI Higher or Lower. If pressure adjustment is needed, Please see Pic attachment for adjustment instructions..
Check Stock

JOR Aquarium Siphon, Fish Tank Gravel Cleaner Kit, for Small Fish Tanks and Aquarium, 65-inches

  • ...fer, and noiseless. In addition, the built-in 3D filter plug can effectively prevent your small fish, gravel and water plants from being sucked out..
  • ✔【Simple Working Principle】The principle of this aquarium siphon gravel cleaner is gravity, so the water outlet must be at least 19.7 inches lower than the water inlet when in use. The air-pressing button can produce a strong siphon after being pressed, so press the button several times until the water fills the entire inlet pipe, then release the button, and the water will flow out automatically. Moving gravel and sand up and down in the inlet pipe can remove debris and dirt in the aquarium..
  • ✔【Suitable for Different Sizes of Aquariums】This fish tank cleaning tool is equipped with a 16.5in water inlet pipe and a 17.7in extension pipe. The total length can be extended from 15.7 inches to 31.5 inches by connecting pipes. Therefore, you can adjust it according to the size or water level of the aquarium, which is suitable for aquariums of different sizes. The 6.6ft outlet pipe is made of high-quality flexible PVC plastic, which is very durable and will not collapse and block water flow..
  • ✔【Cleaner Accessories Include】Air-pressing button x1, 3D filter basket x1, Valve x1, 16.5in Water inlet p....
Check Stock

Aain® 18 Gallon Adjustable Waste Oil Drain Tank Portable Oil Lift Drain with Oil Pan Funnel for Changing Car and Truck Motor Oil

  • Easy Height Adjustment - The Drain Funnel is Easily Adjustable From 45.2 To 69.29 Inches.
  • Oil Drain Tank Working Pressure: 10psi. Air Inlet: 1/4 In.-18 Npt. Ideal For Extracting Waste Oil and Other Fluids From Vehicles.
  • Built-In Easy Pour Handle - Heavy duty rugged steel construction, very portable, perfect solution for your shop or dream garage..
  • Oil Resistant PVC Casters for Easy Mobility - Equipped With Two Premium Fixed Wheels and Two Universal Wheels, For Smooth and Quiet Maneuvering.
  • Utilizes Standard Pressure Relief Valve and Fixed Air Inlet Regulator. Equipped with Important Safety Devices: An In-Line Shutoff Ball Valve That It....
Check Stock

Portable Scuba Tanks,2.3L Scuba Diving Gear,DOT Certified Tanks，Underwater 30-45 Minutes Diving Tank,Bacup Air Tanks

  • ...: The main material of D23-A bottle top valve is brass chrome plating, using vacuum color plating process, to improve the anti-seawater corrosion performance, and more beautiful appearance. The bottle valve has a low pressure interface, which can be connected to BCD or life jacket for better applicability. The air inlet adopts high precision filter core, which can filter particles over 5 microns. The scuba tank is stamped with the DOT certification mark, you can always check..
  • ★【Pressure gauge and pressure tube】: D23-A scuba tank uses A more stable pressure tube, which is made of PVC and butadiol mixture material. It can bear A maximum pressure of 10MPa, and the internal pressure is only 0.8-1.2mpa in normal use. In order to make it easier to check the remaining air in the tank during the dive, we use an extended tube connection pressure gauge. You can fix the pressure gauge in the visual range to check at any time..
  • ★【Package content】：D23-A includ the following products：2.3Ldiving tank+Copper primary breather valve+Extension pressure gauge+Plastic secondary breathing valve *1.
  • ★【After-sales service】: 24-hour af....
Check Stock

NEWCOMDIGI Brine Shrimp Eggs Incubator, Hatchery for Artemia Eggs, Live Artemia Cysts Hatchery Kit, DIY Aquarium Fish Tank Hatch Tool for Fish Food (4 PCS Set)

  • ...ide or Outside Tank Use: Our brine shrimp hatchery kit is a more good looking and effective aquarium feeding tool. The ability to use it inside the tank with suction cups and outside the tank with the included stand. Just make sure the temperature is suitable..
  • ★ ☀❤ Easy to Use: Connect the air pump to the air inlet at the bottom of the incubator, inject the treated water to the standard water level in the incubator tank, and add about 10g sea salt to pre-dissolve, then add 3-5g brine shrimp eggs and adjust the appropriate air volume..
  • ★ ☀❤ Package Including: The 4 PCS Set package comes with 1 x check valve, 1 x suction cup fixed holder, 1 x shrimp incubator, 1 x hose. The 17 PCS Set comes with 1 x shrimp hatchery, 1 x black control valve, 1 x check valve, 1 x air stone, 1 meter of transparent air hose, 1 x shrimp trap, 2 x automatic shrimp feeders, 3 x brine shrimp straws, 6 x brine shrimp storage bottles. (shrimp egg is not included)..
  • ★ ☀❤ Satisfaction Guarantee: If you have the slightest problem with our product, please feel free to give us a message and we will help you solve your problems as soon as possible.We go out of our way to make sure every customer is happy and satisfied with our product and service..
Check Stock

IMXMI 3/4\ Tankbuddy Valve PumpBuddy High Flow Large Water Discharge 20mm Float Valve Double Water Level and Adjustable Water Level (TB20)

  • ...mise starting and stopping of running water or the pump system(Level difference accept Customization)..
  • 2.APPLICATION：water tank、water tower、water pool、Irrigation、 animaldrinking、Sprayequipment、swimmingpool etc..
  • 3.WORK PRINCIPLE：It fits easily through a thin walled tank or screws into a threaded tank inlet.As the tank empties,the float travels down the cord until it hits the level topper.The valve then opens immediately to give a full flow.As we discharge te water, the valve now runs constantly and the float rises until it hits the level adjuster. This lifts the arm and the valve shuts down..
  • 4.ADVANTAGE：High flow, Start and stop levels can be easily adjusted to give water level differentials from 50mm to 2.5 m, Keeps pump operation to a minimum, Valve Seal Access System for quick access to valve seal, Ideal for all makes and models of tanks, Available inlet sizes..
  • 5.Instruction is included in the package. You can install and use it according to the instruction. If you have any after-sales questions, please feel free to contact us..
Check Stock

IMXMI 1" Tankbuddy Valve PumpBuddy High Flow Large Water Discharge 25mm Float Valve Double Water Level and Adjustable Water Level (TB25)

  • 2.APPLICATION：water tank、water tower、water pool、Irrigation、 animaldrinking、Sprayequipment、swimmingpool etc..
  • 3.WORK PRINCIPLE：It fits easily through a thin walled tank or screws into a threaded tank inlet.As the tank empties,the float travels down the cord until it hits the level topper.The valve then opens immediately to give a full flow.As we discharge te water, the valve now runs constantly and the float rises until it hits the level adjuster. This lifts the arm and the valve shuts down..
  • 4.ADVANTAGE：High flow, Start and stop levels can be easily adjusted to give water level differentials from 50mm to 2.5 m, Keeps pump operation to a minimum, Valve Seal Access System for quick access to valve seal, Ideal for all makes and models of tanks, Available inlet sizes..
  • 5.Instruction is included in the package. You can install and use it according to the instruction. If you have any after-sales questions, please feel free to contact us..
Check Stock

Galaxy's Edge Star Wars Legacy Lightsaber (26' Lightsaber Blade)

  • Pack of 2 premium inflatable swords. Luke / Yoda green single blade design..
  • New design: Longer, stronger, and better fight action! Great for high-energy low-impact battle..
  • Customize stiffness and impact level by adjusting air pressure. These sabers can be inflated extra-firm to ridged with an air pump, or compressor. They will swell in diameter with over inflation, so try to keep the air pressure at a minimum to achieve the desired firmness, but maintain the original shape. *For the perfect air pump, no batteries required, and excellent sanitary choice for inflating these, go with Amazon’s ASIN: B091NDVVP3.
  • Easy inflation: One-way check valve incorporated in Inlet to help prevent air from escaping while inflating. For best results: Press back of inlet to help establish the seal prior to initial inflation. Inflate, and hold finger over inlet for a few seconds. This gives the check valve time to rest and seal, and helps maintain air between breaths. Close valve, wait a minute or so for the plastic to relax, and inflate further to desired firmness..
  • To deflate: pinch base of valve. This opens valve and allows air to escape..
Check Stock

EXCELFU RV City Water Fill Inlet Flange Brass with Check Valve, RV Water Inlet Connection 1/2" NPT, City Water Inlet for RV Camper Motorhome Trailer Marine

  • RV City Water Inlet Replacement: Direct OEM replacement of rv city water inlet..
  • Specification of RV Water Inlet: The rv water inlet connection check valve is with 1/2" NPT male threaded pipe on the inside, 3/4" GHT female threaded pipe on the outside, flange thread is 3" diameter..
  • RV City Water Inlet with Check Valve: Built in check valve/back flow preventer and easy to install this city water check valve inside your RV's fresh water system, no more leaking when use tank and pump for water and save water for your RV..
  • Brass RV City Water Flange: The pipe threads of RV water fill inlet is constructed of durable solid brass instead of the plastic. Fine workmanship with precise thread to reduce leaks and resistant to rust, UV light, daily wear and road salts. Made to extend the life of your hose..
  • City Water Inlet for RV: City water connection inlet flanges connet trailer marine RV camper to city water hoses, keeps contaminants out of your fresh water system. Easy-grip knob allows easily attach and detach the hose..
Check Stock