Top Air Tank Outlet Valve

Alomejor CGA347 Paintball Fill Station Kit PCP SCBA Fill Station Charging Adapter with Hand Tight Paintball Refill Adapter

  • SMOOTH DESIGN: This paintball fill station Knob type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time..
  • 45MM DIAMETER: The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use..
  • UNIQUE DESIGN: 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank..
  • APPLY FOR: Easy to install and use. The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints..
Check Stock

Class A Customs 48 Gallon RV Waste Black Water Holding Tank 56 x 30 x 9 WT-4800

  • 48 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

TCP Global 10 Gallon (38 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing Resin in Casting Molds

  • Professional heavy-duty 10 gallons (38 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds the air pressure constant at your regulated air pressure setting during the whole casting mold resin curing process..
  • The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 14.5″ inside diameter and is 17″ deep, so it has a large enough capacity to accommodate almost any casting project. Includes 4 removable caster wheels..
  • Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge from 0 to 100 psi, safety air relief valve and an air release outlet cock valve..
  • The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless resin castings..
Check Stock

AQUANEAT Aquarium Air Pump, for up to 60 Gallon Fish Tank, Hydroponic Oxygen Aerator, with Airline Tubing, Air Stone, Air Bubbler, Check Valve

  • AQUANEAT Aquarium Air Pump, for up to 60 Gallon Fish Tank, Hydroponic Oxygen Aerator, with Airline Tubing, Air Stone, Air Bubbler, Check Valve….
  • Adjustable Airflow: With a control knob, you can adjust the air pressure to produce enough bubbles keeping the water oxygenated.
  • Quiet Operation: 4 rubber feet help it to stay in place and remains quiet.
  • Dual-Outlet: Great to power multiple small sponge filters, air bubbler decorations, air discs or other air-driven ornaments.
  • Complete Fish Tank Air Pump Kit: 1x Air Pump, 1x 4ft Tubing, 1x 1” Air Stone, 1x Check Valve.
Check Stock

Aquarium Air Pump Accessories Set 25 Feet Airline Tubing with 6 Check Valves, 6 Control Valve and 40 Connectors for Fish Tank White

  • 1 roll of 25 Feet Standard 3/16" Air Line Tubing, Suitable for aquarium, fish tank and hydroponics..
  • Flexible Air tubing,without kinking that stands up to wear and will not crack or become brittle over time..
  • 40 Connectors (Straight & T-shape) - Perfectly connect standard tubing, T-connector allows you to combine two inputs to create one output with dual outlet pumps..
  • 6 Pcs Air Control Valve and 6 Non-Return Check Valve..
  • Excellent 3/16 inch ID Standard airline tube holder, stick tightly to the smooth fish tank. Red clear valve can prevent water from back siphoning..
Check Stock

Fafeims CGA347 Paintball Fill Station PCP SCBA Charging Connector Adapter with Hand Tight

  • ?PERFORMANCE?The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use..
  • ?APPLICATION?6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank. It is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints..
  • ?EASY TO USE?Knob type exhaust valve, the air outlet is very smooth. The hand tight CGA347 nut and nipple for connecting with SCBA(Fire fighting) tank..
  • ?SIZE?24 inch long x 0.070 inch ID(DN2) micro-bore hose. The valve charging connector is made of sainless steel, which is sturdy and durable for long time use..
Check Stock

Hitachi Pilot Unloader Check valve Combo for Gas Compressors 885426 EC2510E

  • Replaces Hitachi 885426 for EC2510E Gas Compressors 110 - 140 PSI Made in USA.
  • Check valve /Unloader valve / Pilot valve all in one - (continuous run unloader) for gas & electric powered air compressors.
  • 110 - 140 PSI factory setting. pressure can be adjusted 30-40 psi up or down.
  • 1/2" Metric Flare TOP Inlet x 3/8" Male Pipe Thread outlet to air tank.
  • 30 scfm Rating ! Pressure can be adjusted 30-40 PSI Higher or Lower. If pressure adjustment is needed, Please see Pic attachment for adjustment instructions..
Check Stock

CGA347 Female Thread Air Rifle Fill Station PCP Charging Adaptor with 36 Inch Hose for Paintball PCP SCBA 0-6000 PSI Filling Station Inflation Valve Kit

  • ✅►【Application】: Fill station refill charging adapter for paintball is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints..
  • ✅►【Parameter】：With 45mm diameter glycerine filling gauge, 0~ 40mpa, max pressure 6000psi fill station designed for paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank..
  • ✅►【Knob type exhaust valve design】：With knob type exhaust valve make the air outlet smoothly, which is safe to use operate and durable to use..
  • ✅►【Easy to read】：CGA347 female thread with valve gauge, paintball charging adapter inflators are easy to read pressure gauge ensure the convenience and reliability..
  • ✅►【Satisfied guarantee】：We provide lifetime money back guarantee, for any reason you're not completely satisfied, you can ask for a replacement or full refund..
Check Stock

MCAMPAS 350PSI Soft Nose P.O.L valve with 12 Feet Propane Weed Burner Torch Hose Adapter for Use Connects to U.S.Any Standard Propane Tank to Propane Weed Burner Torch Head Burner

  • ➤Suitable use fit American standard 5lb-100lb PPOL valve regulator propane tank, Converts POL LPG propane tank service valve connects to propane weed burner.
  • ➤12 Feet 350 psi high pressure propane hose can extend enough propane tanks to connect to propane torch weed burner to safely use the space.
  • ➤Propane weed burner torch hose adapter outlet joint is 5/8” parallel pipe thread Joint （3/8"-19 Left Hand Internal Thread.)compatible with standard propane torch gas burners whose inlet thread diameter is 5/8" adapter.
  • ➤The POL lp tank service valve propane hose adapter has passed CSA certification and has an internal overcurrent protection mechanism to prevent leakage. POL safety valve with handle (loose by turning right, tight by turning left) connects to any standard propane tank has lp tank POL service valve.
  • ➤It replaces the problematic propane hose adapter on the propane weed torch. NOTE:, before purchasing, please check whether the propane weed torch air inlet connector is compatible with the 3/8"-19 internal thread left-handed or joint thread diameter is 5/8" joint.
Check Stock

SMACO Scuba Tank Diving Gear for Diver Mini Scuba Tank Oxygen Cylinder with 15-20 Minutes Capability Diving Oxygen Underwater Breathing Device 1L Diving & Snorkeling Equipment S400-G-BLACK

  • 【USING IT MORE SAFER】:SMACO S400 diving gear adopts a constant pressure air outlet device to make the air outlet pressure constant, making breathing very easy.At the same time, an external explosion-proof valve design is adopted, which makes the explosion-proof index more accurate and safer to use..
  • 【20 MINS UNDERWATER BREATHING】:SMACO mini diving tank has a capacity of 1L and can breathe underwater for 15-20 minutes. At the same time, the scuba tank has three-layer filtration device, which effectively prevents the entry of dust and impurities, making the inhaled gas cleaner. (Attention: Diving depth, temperature, and breathing rate will affect the use time of the scuba tank.).
  • 【BOARD THE PLANE】:After you disassemble the scuba tank, you can take it on the plane and go diving anywhere. It has safe depth limit of about 33ft. It can be used as a backup air source for deep diving within 100 ft. Mini diving cylinder is suitable for underwater exploration, boat cleaning, emergency rescue, backup air source, etc..
  • 【FOUR WAYS TO INFLATE】:✅The S400 scuba tank has passed the DOT certification and can be inflate....
Check Stock

SMACO Scuba Tank Diving Gear for Diver Mini Scuba Tank Oxygen Cylinder with 15-20 Minutes Capability Diving Oxygen Underwater Breathing Device 1L Diving & Snorkeling Equipment S400 (F-Green)

  • 【USING IT MORE SAFER】:SMACO S400 diving gear adopts a constant pressure air outlet device to make the air outlet pressure constant, making breathing very easy.At the same time, an external explosion-proof valve design is adopted, which makes the explosion-proof index more accurate and safer to use..
  • 【20 MINS UNDERWATER BREATHING】:SMACO mini diving tank has a capacity of 1L and can breathe underwater for 15-20 minutes. At the same time, the scuba tank has three-layer filtration device, which effectively prevents the entry of dust and impurities, making the inhaled gas cleaner. (Attention: Diving depth, temperature, and breathing rate will affect the use time of the scuba tank.).
  • 【BOARD THE PLANE】:After you disassemble the scuba tank, you can take it on the plane and go diving anywhere. It has safe depth limit of about 33ft. It can be used as a backup air source for deep diving within 100 ft. Mini diving cylinder is suitable for underwater exploration, boat cleaning, emergency rescue, backup air source, etc..
  • 【FOUR WAYS TO INFLATE】:✅The S400 scuba tank has passed the DOT certification and can be inflate....
Check Stock

SMACO Scuba Tank Diving Gear for Diver 1L Mini Scuba Tank Oxygen Cylinder with 15-20 Minutes Underwater Breathing Portable Diving Tank Kit for Underwater Exploration Emergency Rescue Pony Bottle S400

  • 【USING IT MORE SAFER】:SMACO S400 diving gear adopts a constant pressure air outlet device to make the air outlet pressure constant, making breathing very easy.At the same time, an external explosion-proof valve design is adopted, which makes the explosion-proof index more accurate and safer to use..
  • 【20 MINS UNDERWATER BREATHING】:SMACO mini diving tank has a capacity of 1L and can breathe underwater for 15-20 minutes. At the same time, the scuba tank has three-layer filtration device, which effectively prevents the entry of dust and impurities, making the inhaled gas cleaner. (Attention: Diving depth, temperature, and breathing rate will affect the use time of the scuba tank.).
  • 【BOARD THE PLANE】:After you disassemble the scuba tank, you can take it on the plane and go diving anywhere. It has safe depth limit of about 33ft. It can be used as a backup air source for deep diving within 100 ft. Mini diving cylinder is suitable for underwater exploration, boat cleaning, emergency rescue, backup air source, etc..
  • 【FOUR WAYS TO INFLATE】:✅The S400 scuba tank has passed the DOT certification and can be inflate....
Check Stock