Top Alignment Pins

Real Avid Accu-Punch Hammer & Punches Set with Smart Bench Block, Combo (Hammer & Brass Punches + Bench Block) red

  • ESSENTIAL WORKBENCH TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and Punches Set paired up with innovative Smart Bench Block.
  • BRASS AND STEEL FLAT TIP GUNSMITHING PUNCHES: standard sized, brass and steel pin punches AND PIN ALIGNMENT TOOL.
  • 1/16", 5/64", 3/32" FLAT TIP steel punches and 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" FLAT TIP brass punches 5/16" engineering resin punch.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
  • SMART BENCH BLOCK: non-slip, steady work surface, helps protect finish and firearm itself from causing accidental damage. MAGNETIC: captures the small pins – prevents losing pins.
Check Stock

Umbrella Corporation Mil-Spec Stainless Steel Replacement Phillips AR Grip Screw with Washer - Set of 4

  • INCLUDES: 2 steel punches, 1 with counter-bored tips to start roll pins and one with indexing tips to finish roll pins.
  • ACCURACY: Flat on one side for proper alignment.
  • NON-DESTRUCTIVE: Rubber over-molded to prevent damage to your firearm.
  • EASE OF USE: Start bolt catch pins easily with the starter punch and finishes installation flush with the finishing punch.
  • CONVENIENT: Contains both the starter and finishing punch.
Check Stock

The Hillman Group 44242 3/16 x 1-Inch Metal Dowel Pin, 12-Pack

  • Dowel pins commonly used to retain parts in a fixed position or to preserve alignment.
  • Included variants range from 3/32" to 3/8" in diameter.
  • Included variants range from 3/8" to 1-1/2" in length.
  • These metal dowel pins measure 3/16" in diameter x 1" in length.
Check Stock

PREXISO Square Laser-65Ft Green Beam Floor Tile Laser Level, Tile Laser Line Projection, Angle 90 degree Aluminum Base Magnetic Level Square Built-In 2 Bubble Vials-With 3 Mounting Pins 3AA Batteries

  • PREXISO Square Laser - 65Ft Green Beam Floor Laser Level, Tile Laser Line Projection, Angle 90 degree Die Cast Aluminum Base Magnetic Level Square Built-In 2 Bubble Vials - With 3 Nails, 3 AA Batterie.
  • Alignment Guide & Bubble Vials - 2 Bubble vials for precise positioning, and ensure a level tile, the two laser lines are at an exacting 90° angle.
  • Alignment guide helps Calculate and turn angles in 5° increments for 90° layout.
  • Magnetic Base & Mounting Pins- Durable aluminum magnetic base for attachment to metal surfaces and turn the laser level around by alignment guide.
  • PREXISO square laser also includes 3 integrated mounting pins to affix laser to wall surfaces.
  • One-Button Operation - Simple one-button operation powers 2 perpendicular laser lines on and off. Projects horizontal, vertical and angle at 90 degrees laser “chalk lines” on surfaces, for leveling and aligning laser tool and wall.
  • Highly Visible Green Beam - Green laser is 3 times brighter than red laser with the same light source.
  • PREXISO Square laser projects perpendicular chalk lines on any surface up t....
Check Stock

Dowel Jig Hand-held Doweling Jig With Dowel Pins And Drill Bits

  • Dowel jig with box packing well storage and makes jig accessories tidy.
  • Dowel jig makes dowel corner, edge or surface joints quickly and accurately..
  • Self-centering dowel jig with 0-50 mm scale for drilling in alignment..
  • 3 size of hardwood dowel pins with chamfered ends Add strength and endurance.
  • Doweling Jig kit: 1pc jointing jig and jig accessories including drill bits, wood dowel pins, etc..
Check Stock

IQ Bowsights IQ Micro 5-pin, LH - New for 2021,Multi,IQ00361

  • ...better. An enhanced fiber optic containment continues to further user's accuracy at extended ranges with increased peace of mind and greater durability..
  • PATENTED TECHNOLOGY - The 5-pin, all-aluminum Micro sight offers top-end performance and precision adjustments that comes standard with IQ’s patented Retina Lock Alignment Technology. The perfect system for use with or without a conventional peep sight..
  • ULTIMATE PRECISION - Tool-free micro-adjust windage and elevation knobs and dials with an angled mounting bar offer multiple bow and quiver attachment points. New pin system allows for closer pin gaps to fine-tune individual pins to ultimate precision..
  • GREATER ACCURACY - Laser etched windage and elevation marks make for simple, yet precise tuning, while an optimally-sized round pin housing delivers consistent peep alignment for shot-to-shot accuracy..
  • MAXIMUM DURABILITY - Fully captured fiber optics are protected creating better durability than before, while maintaining ultra-bright illumination when needed most. Guaranteed to improve user's shooting at all distances but is most evident at long range..
  • PRODUCT SPECS: Built-in sight level, Tool-free locking knobs, Adjustable 2nd and 3rd Axis, Built-In Light Adapter, Rheostat sight light (sold separatel....
Check Stock

XtremepowerUS 32oz Dead Blow Hammer Dual Head 2lbs Ball Peen Blow Striking Flat Pein Non-Slip Handle, Orange

  • FOR GUNSMITHS: Make precise, repeatable taps with the ergonomic, weight balanced hammer set. This hammer tool set is a must have for any armorers tool kit for firearm disassembly, gun repair and for custom builds..
  • INCLUDES: Premium hammer, four interchangeable hammer head tips, steel hammer tip, rubber, nylon, brass gunsmithing hammer tip, pin alignment tool and molded carry case..
  • GUNSMITH HAMMER: Adjusts easily with the 4 interchangeable driving head faces. Whatever the job is the 4 in 1 design allows you to have a metal hammer, brass hammer, nylon hammer and soft hammer all in one..
  • PIN ALIGNMENT TOOL: Holds even the smallest pins precisely for frustration free tapping..
  • VERSATILE: Gunsmithing hammer is well balanced for precision taps, easy to control and can be also used as jeweler hammer, making crafts or any other DYI projects.
  • ESSENTIAL TOOL: Hammers tools are a must-have in any gun repair tool kit to remove or install pins in order to disassemble, maintain and customize guns..
  • SATISFACTION GUARANTEED: Real Avid backs their products. We are a US based company, and our customer support is easy to reach. Customer satisfaction is our highest priority..
Check Stock

SST Stair Tread Gauge and Shelf Layout Tool | Accurately Measure Material Edge, Length, Angle | Removable Edge Pins to Precisely Transfer Stair Treads, Risers, Shelves, Cabinet Dimensions

  • TOP-NOTCH ACCURACY - Transfer Stair Tread & Riser Dimensions for a Consistently Perfect Fit! Our Stair Tread Gauge Delivers the Key to easily Match and Transcribe the Exact Length, Angle, and Position - for a Perfect Fit, On the First Try..
  • EDGE ALIGNMENT PINS - Removable Stainless Steel Pins align to the Material Edge, Making Repeatability and Edge Alignment Easy Work. Use the Stair Tread Tool's Body as a Straight Edge to Quickly Transfer the Workpiece's Edge..
  • LONG REACH - Massive 51.5" Maximum Extension Width to Accommodate any Stair Size. Even larger project, like Shelves and Cabinets, Work Flawlessly Thanks to the Tool's Lengthy Reach..
  • VERSATILE - Whether you are Cutting and Measuring Stair Treads, Stairs, Risers, Shelves, or any Other Angular Layouts, our Telescoping Design with 12" Arms Enables Easy Measurements in any Situation.
  • EXCEPTIONAL QUALITY - Precision CNC Machined from 6061 Aircraft Grade Aluminum & Stainless Steel for a Life Time of Corrosion Free Operation, Even in Humid or High-Temperature Environments.
Check Stock

Megacast Cast Iron 2-Part Flask Mold for Delft Sand Casting Jewelry Making Tool

  • Cast iron mold for use with sand casting clay. Allows you to easily duplicate shapes, metals, coins, jewelry pieces, and more!.
  • Measures: outer 4 7/8" x 3 1/2" x 2 1/4" not including neck and inner size 4-3/8" x 3 7/8" x 2 1/4"..
  • Neat and Easy Alignment: Correct alignment of flask mold frames is feasible with four locating pins which hold the frames firmly..
  • Material: This pair of Flask Mold is highly durable and robust vessel made of sturdy cast iron..
  • Allows you to cast highly detailed silver, gold, bronze, copper, and more.
Check Stock

1/2in Shank Biscuit Jointer Set With Bearings For No's 0, 10 and 20 BISCUITS

  • Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time..
  • Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.Routing Height Adjuster with Scale: 5-30 mm.
  • Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°..
  • Indexing pins for quick alignment against the edge of the workpiece for accurate placement..
  • Dust extractable design provides clean mortise holes for better glue adhesion and longer cutter life. Power Consumption - 420 watts.
Check Stock

Zackman Scientific Wheel Alignment Clamp Tool Kit for Magnetic Camber Gauge Fits 11-25 Rims

  • UNIVERSAL ADAPTER PLATE: Included adapter plate works with magnetic camber gauges to easily measure and adjust wheel alignment..
  • WIDE RIM COMPATIBILITY: Wheel clamp mounts onto rims between 11-25" diameters..
  • PRECISE LOCATING PINS: Adjustable and reversible Hunter-style locating pins ensure accurate measurements..
  • STURDY CONSTRUCTION: Made with durable stainless steel adapter plate and heavy-duty slider rods for long-lasting use..
  • EASY TO USE: Simple design makes it easy to attach and remove from rims for quick measurements..
Check Stock

Cast Iron 2-Part Flask Mold Frame for Sand Casting Jewelry Metal Casting Making Tool

  • Material: This pair of Flask Mold is highly durable and robust vessel made of sturdy cast iron..
  • Cost Effective: These casting mold are extremely price effective thanks to low tooling and equipment cost..
  • Neat and Easy Alignment: Correct alignment of flask mold frames is feasible with four locating pins which hold the frames firmly..
  • Application: It permits you to simply duplicate shapes, metals, coins, rings jewelry items, and other complex shapes with ease..
  • Ample Scope: Ideal to be used with Petro bond, Delft and Sand Casting Clay and metals like Gold, Silver, Copper, Brass etc.
Check Stock