Top Alloy Bar Bender

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

7 Size Pipe Threader Threading 3/8 to 2 Die Dies Set w/ Handle Ratchet

  • 7 exchangeable tube bender aluminum former: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8".
  • The package include with a pipe cutter that with spare blade.
  • The tubing bender is a professional tool for commercial or occasional use to change bending mandrels quickly..
Check Stock

3 in 1 Tube Bender - Yellow Jacket 60390

  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • INCLUDED COMPONENTS: Bender body, crossbar, reverse bending attachment and mandrels for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7"8 tubing.
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe Cutter, 2 x Flip Arm, 1 x Trimmer..
Check Stock

Hilmor Reverse Bending Attachment - HVAC Tool Tube Bender, Black, CBRBM 1890999

  • BENDER ATTACHMENT: Attach this two piece reverse bender to the Hilmor Compact Bender 1926598 (sold separately).
  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • TUBE SPECIFICATIONS: Bends 1/4” to 7/8”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8” Tubing made of soft metals like copper, steel, aluminum, brass.
Check Stock

Antstone 1/4” 3/8” 1/2” O.D. Tubing Bender 3 in 1 Tube Bender 180° HVAC Copper Aluminum Tubes Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for soft copper / aluminum tubes.
  • applicable tube outer diameter: 1/4"、3/8"、1/2".
  • applicable wall thickness: 0.027”-0.059”(0.7mm-1.5mm).
  • bending radius: 0.82”, 1.14”, 1.43”(21mm, 29mm, 36.5mm).
  • [3-in-1 Design] - The tube bender is a 3 in 1 tool and will fit 1/4", 3/8", 1/2" outside diameter tubes..
  • [High Quality] - High-quality alloy aluminum body, which is lightweight and durable. (NOTE: if the tube wall thickness < 0.059”, it may be damaged.).
  • [Professional Design] - (1)Aluminum alloy material makes it light and portable.(2)The soft rubber handle provides a comfortable grip..
  • [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc..
Check Stock

IBOSAD Reverse HVAC Refrigeration Ratchet Manual Compact Copper Tube Bender & Pipe cutter Copper Pipe Tubing Set with Bending 3/4 7/8 3/4 1/2 5/8 1/4 5/16

  • 7 exchangeable tube bender aluminum former: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8".
  • The package include with a pipe cutter that with spare blade.
  • The tubing bender is a professional tool for commercial or occasional use to change bending mandrels quickly..
Check Stock

Yellow Jacket 63325 - Deluxe Alloy Ratchet Tube Bender Kit

  • Color coded alloy mandrels to bend 1/4, 5/16, 3/8, 1/2″, 5/8, 3/4 and 7/8 tubing.
  • Reverse Bending Mandrel (PN 63342) included in Deluxe Kit (PN 63325) or may be ordered separately.
  • Simple and secure mandrel attachments with ball-dent feature.
Check Stock

Yellow Jacket 63331 - Alloy Ratchet Tube Bender Kit

  • Color coded alloy mandrels to bend 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 and 7/8 tubing.
  • Simple and secure mandrel attachments with ball-dent feature.
  • Bend 3/4 tube to 90 in less than 10 seconds.
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • Product 1: 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • Product 1: 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Product 1: Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the st....
Check Stock

LORESO Tube Bender Tubing Bender 0-180 Degrees Pipe Bender - 3 In 1 Copper Bender for 1/4 5/16 3/8 Tubing Bending Tools- Manual Tubing Bender for Copper Brass Aluminum and Thin Steel Pipes

  • MANUAL TUBING AND PIPE BENDER – manufactured with high-quality, heavy duty steel, this tube bender will efficiently bend copper, brass, aluminum and....
  • VERSATILE PIPE BENDER FOR ALL INDUSTRIES – this copper pipe bender is suitable for use on construction sites, plumbing jobs, shipping,....
  • EASY TO OPERATE – the Loreso manual pipe bender is easy to operate and portable so you can take it from site to site. Made with high precision and....
  • VARIOUS DEGREES AVAILABLE – simply adjust the metal bender according to the angle you require from 0-180 degrees. This pipe bender is a 3 in 1 tool....
  • STURDY CAST IRON FRAME – our copper tube bender is made from strong, durable cast iron and can be mounted on either a bench or frame – the safest....
Check Stock

IDEAL Electrical 74-028 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1 in. EMT Pipes, Benders

  • Conduit Bender: ideally used to bend iron and metal pipes, the iron conduit bender offers application in electrical repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages.
  • Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1 in. EMT metal pipes as well as 3/4 in. Rigid & 3/4 in. IMC pipes. It uses industrial standard Benfield b....
Check Stock