Top Alloy Steel Butt welded Bend

Forney 32110 E7014 Welding Rod, 1/8-Inch, 10-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

EVIL ENERGY 3.0 Inch Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2PCS

  • Size: Joins 3.0" OD pipe to 3.0" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

EVIL ENERGY Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2.25 Inch,2Pcs

  • Size: Joins 2.25" OD pipe to 2.25" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

Forney 32101 E7014 Welding Rod, 1/8-Inch, 1-Pound

  • All position welding rod with digging arc, deep penetration on dirty or rust materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds.
  • Excellent for galvanized steel and rusty/oily steel in maintenance.
Check Stock

Qkits Cold Cathode Fluorescent Lamp for PC Fan Pink

  • Preminum Material: Light stand pole is made of highest quality aluminum alloy material, and with sophisticated workmanship, which is light in texture and easy to carry..
  • Reasonable Design: Dual-use lamp posts, products with ground nails. The base can be fixed to the edge of the table or inserted into the ground for use. And it brings you much convenience..
  • Suitable for: The hook is made of stainless steel, which has strong bearing capacity and is not easy to bend. And it is ideal tool for camping, picnic and some outdoor parties..
  • Easy to Use: Screw interface, easy to install and disassemble, It can be used only by fixing two butt joints, one person can complete the operation. And it saves time and efforts..
  • Wonderful Replacement: Included 2pcs storage bag makes transportation and storage easy. And it is a wonderful upgrade replacement..
Check Stock

Low Temp Aluminum-Zinc Brazing Rod 10/20/50Pcs 500mm x 2mm 3.5g Tube General Purpose Aluminum TIG Welding Rod No Need Solder Powder

  • 【Great Welding Effect】With full & smooth welding effect because of internal powder. With low melting point(647°~658°), great weldability and....
  • 【No Need Solder Powder】You don't have to use other flux powder with aluminum alloy as the welding core and coating as the salt base. Very....
  • 【Widely Use In Life】Suitable for welding or surfacing welding alloy with high strength, good forgeability & good corrosion resistance..
  • 【Very Wide Application】It is mainly used for argon arc welding and filling material for pure aluminum, connection with aluminum bus and guide rod....
  • 【Light Weight & Small Volume】 Size of 500 x 2mm & weight of 3.5g, very easy to bend & carry. Delivery: Ship From US, It Takes About One Week..
Check Stock

Forney 31610 E6010 Welding Rod, 1/8-Inch, 10-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
  • Note : In order for this product to work correctly you must have the appropriate machine with the appropriate OCV and the correct technique.
Check Stock

Plasma Cutter Welder Combo Pulse TIG Welder Stick Welder 3 in 1 Welding Machine, 50A Plasma Cutting, 200A TIG Welding (Pulse), Arc/MMA Welder More Stable Arc Dual Voltage 110V/220V 520TSCPF

  • ✅【Plasma Cutter】10-50Amp DC current output. The cutting machine offers a variety of welding and cutting abilities.
  • Compact plasma cutter has a Handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ✅【 Pulse TIG Welder】10-200AMP DC TIG electric current output.
  • The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life. Quality TIG welding on stainless or steel and precise welding of thinner-gauge materials. Easy work with foot-pedal (it is not included in standard accessories). Please make tungsten head sharp before using TIG welder, can get better welding in this way..
  • ✅【STICK/MMA/ARC Welder】Output current 10-180Amps, Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6mm to #4.0mm..
  • ✅【Multiple Uses 】The welding machine suitable for weld stainless steel, alloy steel, carbon steel and nonferrous metals.
  • ideal for a welding enthusiast or hobbyist with....
Check Stock

SXJZ Motorcycle Handlebar 7/8\ 22MM Universal Handlebar Crossbar With Foam Pad Compatible With CRF YZF KXF KLX Dirt Bike ATV(Black)

  • Made of compound metal with steel and aluminum alloy(#6061). Stronger and tougher..
  • The surface of the handlebar is ANTI-CORROSION and ANTI-OXIDANT. Made by SANDBLAST and ANODIC OXIDATION technology..
  • ARGON-ARC welding works. The bar won't bend or broke when riding..
Check Stock

E7018 3/32'' Welding Electrode Rods Carbon Steel Welding Electrode 5Lb for Mild or Low Alloy Steels

  • Material: The package includes 5LB E7018 3/32'' basic carbon steel electrode.
  • Standard: AWS A5.1 E7018 ISO2560-A E42 3 B 1 2 GB/T5117 E5018.
  • Advantage: The E7018 Stick welding rod is a multi-purpose electrode with excellent handling properties. 7018 Arc welding rod performs particularly well when welding mild or low alloy steels such as bridges, construction, shipbuilding and pressure vessel fabrication, to name a few. E7018 Stick electrode can also be used in construction and maintenance of a series of construction machinery such as bulldozers, agricultural or mining equipment.
  • Application：E7018 carbon steel electrode Used to weld the Marine steels (A、B、D、E、AH36、DH36、EH36）and the same grade strength low carbon steel, mechanical performance , impact value can be as high as 150J @ -30 ℃. AC & DC.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock