Top Alloy Steel Copper Casting

TECHTONGDA CG1-100C Double Torch Track Burner Portable Handle Gas Cutting Machine 110V

  • 1. Easy to operate, smooth operation. The product moves slowly on the rails and uses thyristors to control the speed, making handling very simple due to control buttons..
  • 2. Reliable quality and durable. Body-precision high-strength aluminum alloy die-casting, the drive movement commutator using silver-copper alloy, copper power line..
  • 3. High cutting precision, the torch angle can be adjusted freely. Straight cut, can cut I, Y, V slot..
  • 4. Safe enough, scientific and reasonable control logic, clear operation buttons, while ensuring efficiency, provide sufficient security..
  • 5. Wild Application, this Flame Cutting Machine is widely applied in shipbuilding, oil production, metallurgy, metal structure and many other industrial fields..
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

ArtMolds High Grade Copper Powder - Easy Cold Casting Using Polyurethane Resin for Making Sculptures | Home and Office Decors - 1lb/350 Mesh

  • A Quality Product: Our ArtMolds Copper Powders of high grade 350 Mesh will patina over time if left unsealed.
  • Perfect for Cold Casting: Our ArtMolds Copper high grade powder comes with uncoated spherical particles for cold casting creates the look of of solid copper and making sculptures and copper art and crafts.
  • Easy to Use: Our ArtMolds Copper Powder high grade powder is an Easy cold casting formula using polyurethane resin. Just combine, mix well and pour into mold.
  • Multipurpose Usages: Our ArtMolds Copper Powder high grade powder can be use in the multipurpose activities like powder coating, glitter formulas making sculptures, Home and office decors and many more.
  • Mold your Creativity into a Shape: Try our Art molds high grade cold casting Copper Powder at your home and office decors and enhance your creativity level and feel artistic.
Check Stock

Pewter Ingot 97LF Fine Detail Pewter (2lbs | 97% Tin 2.5% Bismuth .5% Copper) Lead Free by MS MetalShipper

  • ✔️ PEWTER INGOT 2LBS - 97LF - 97% TIN | 2.5% Bismuth | 0.5% COPPER. Our Pewter Ingots are approximately 2 pounds each and are made up of 97% Tin, 2.5% Bismuth, and 0.5% Copper. This is lead-free pewter and is very good to use for casting. We sell this Pewter in ingot form as shown in the product images. This type of Pewter is also known as Britannia Alloy. Be sure to see our promotional discounts for certain quantity levels if you would like to save money. MADE IN THE USA..
  • ✔️ USAGE - This is lead-free pewter and is very good to use for casting. It melts easily and retains its shine. This pewter is used often in jewelry making and also making utensils, teapots, candlesticks, urns, maces, and drinking vessels. This item is one of our best sellers because of its versatility and ease of use..
  • ✔️ SIZE - Each 2lb pewter ingot is approximately 4.25 inches long by 2 inches wide by 1.25 inches high.
  • ✔️ SPECIFICATIONS - Melting Point (F) = 563 | Pouring Temp (F) = 650 | Density (g/cm3) = 7.28 | Analysis: TIN 92%, BISMUTH 2.5%, COPPER 0.5%..
  • ✔️ PACKAGING - This 2lb pewter ingot will arrive sealed in heavy duty BPA free plastic to prevent any corrosion or oxidation. Each 2lb ingot is guaranteed to be 2lbs plus or minus 4%..
Check Stock

Bestgle 4Pcs 6mm(1/4”) Shank Tungsten Carbide Rotary Cutting Burr Die Grinder Bit for DIY Woodworking, Metal Carving, Polishing, Engraving, Drilling, 150-160mm Length

  • Set of 4 Double Cut Solid Carbide Rotary Burr Set, Shank diameter: 6 mm(approach 1/4 inch), Cutting edge diameter: 7mm-10mm, Total length: 150-160 mm.
  • The service life of tungsten steel rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.
  • High performance on processing Copper, Aluminum, Alloy, Iron, Marble, Jade, Steel, Glass, Wood and Plaster etc. machining hardness can reach to HRC70.
  • Generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
  • Excellent for fine detail work,widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding,ect.
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

Hardness Testing File Set

  • 【Accurately measured value】-----Precision measurement circuit to ensure Indication error ± 0.5% (HLD = 800), showing the value of repeatability 0.8%.
  • 【Leeb hardness measurement】-----Based Leeb hardness measuring principle, can detect a variety of metal materials.
  • 【Supports a variety of standard hardness】-----Real-time display and conversion: Brinell HB, Rockwell HRC, Vickers HV, Shaw HS, and three kinds of intensity values.
  • 【Applicable Materials】-----Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (brass), an alloy of copper and tin, copper(bronze).
  • 【Application】-----1)Bearings and other parts.
  • 2)Failure analysis of pressure vessel, steam turbine generator group and equipment.
  • 4)Mechanical or permanent assembly installed.
  • 6)The original record of formal requirements on test results.
Check Stock

ProBalkn Deburring Tool with 6 HSS Blades for Steel, Cooper, Brass, PVC, Resin and Mini Tube Cutter with 1 Extra Blade for 1/8' - 1-1/8' Stainless Steel, Cooper, Aluminum, Brass, Plastic Pipes

  • Package Content: 1 x tube cutter (2.87x1.97x0.98 inches) with 1 x extra blade.
  • 1 x deburring tool (4.9 x 0.87 inches) with 6 x different blades for metal, plastic, and brass.
  • All-Purpose Deburring Tool: Ranging from DIY projects, home use, to professional industrial and plumbing applications, this deburring tool removes fast and easy burrs from the straight edge, curved edge, and holes.
  • with the storage handle design, spare blades are easily kept in and could be reached at any time.
  • Various Blades: Included 6 HSS sharp steel blades allow a precise and smooth hand deburring of all sorts of edges.
  • 2 x BK3010 blade with 45° angle for plastic.
  • 2 x BS1010 blade with 40° angle for the brass and copper.
  • 2 x BS1018 blade with 45° angle for steel.
  • Mini Tube Cutter: Our pipe cutter is designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass, and plastic tubing, ensuring easy control of cutting pressure for clean cuts.
  • the cutting capacity is from 1/8" to 1-1/8" (3-28mm).
  • Sturdy Aluminum Cast Frame: The tube Cutter body is made of lightweight and durable aluminum casting.
  • the blade is built using CNC machining with special durable and high-quality alloy steel.
Check Stock

MG Chemicals - 415-500ML 415 Ferric Chloride Copper Etchant Solution, 475 ml Liquid Bottle,

  • More aggressive than persulphate alternative.
  • Ready to use solution designed for etching printed circuit boards and other metals.
  • Used for etching copper, brass, bronze, Damascus steel, stainless steel, PCB fabrication, Jewelry making, Metalsmithing, Decorate art knives and other metalwork, Steel sign acid etching, Etching pattern welds, Etching on stone surfaces, Used as a colorant in pit-firing some pottery, Glass casting.
Check Stock

Pewter Ingot 2lbs - Britannia Alloy - Lead Free By MS MetalShipper

  • ✔️ PEWTER INGOT 2LBS - BRITANNIA ALLOY - 92% TIN | 7.5% ANTIMONY | 0.5% COPPER. Our Pewter Ingots are approximately 2 pounds each and are made up....
  • ✔️ USAGE - This is lead-free pewter and is very good to use for casting. It melts easily and retains its shine. This pewter is used in many....
  • ✔️ SIZE - Each 2lb pewter ingot is approximately 4.25 inches long by 2 inches wide by 1.25 inches high.
  • ✔️ SPECIFICATIONS - Melting Point (F) = 563 | Pouring Temp (F) = 650 | Density (g/cm3) = 7.28 | Analysis: TIN 91.9708%, ANTIMONY 7.4992%, COPPER....
  • ✔️ PACKAGING - This 2lb pewter ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation. Each 2lb....
Check Stock