Top Alloy Steel Machining Shaft

RC Drift Car 1/24 2.4GHz 4WD Remote Control Sport Racing On-Road Vehicle with LED Light, Batteries and Drift Tires (Blue 460)

  • ZD Racing launched a 1/16 full-proportional controller four-wheel drive track flat sports car.
  • The full-scale re-engraved car shell is equipped with LED ambient lights.
  • A large number of metal structural parts are used, and the hollow and high-gloss design can effectively reduce the weight of the body, enhance the strength of the body, and have a full metal texture.
  • Aluminum alloy CNC precision machining bottom plate, hollow design.
  • effectively reduce the weight of the body and enhance the strength of the body.
  • The whole car adopts refined steel drive shaft, precision high-speed bearings, and high-strength gear power transmission system, which is not afraid of speed. Easily achieve indoor/track drift racing, bringing a super visual feast.
Check Stock

DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Metal handle)

  • ...et can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
  • wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed..
  • Ergonomic design: the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice..
  • woodturningTools and Accessories - 1pcs handle and 1pcs extension bar ,3PCS tool bars with carbide cutters(Round,Square,Diamond),1PCS swan neck carbide cutter hollowing tools, 1pcs T15 wrenc....
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

3PCS BAP300R C10-10-120-1T/C12-12-130-1T/C12-13-130-1T 1Flute Indexable End Milling Holder+ 6PCS APMT1135PDER CNC Inserts+3PCS T8 Wrench (3PCS 300R End Milling Holder)

  • * Package includes ：1PCS 300R C10-10-120-1T +1PCS 300R C12-12-130-1T+1PCS 300R C12-13-130-1T+ 6PCS APMT1135PDER + 3PCS T8 wrench. If you need more APMT1135PDER, please search ASIN：B097RG372M..
  • * High performance replaceable inserts, anti-seismic high-quality alloy steel, can effectively suppress vibration..
  • * It is suitable for rough machining, finish machining, digging machining, groove machining and cutting machining..
  • * The screw offset fastening design makes the inserts and groove closely combined, enhances the rigidity, and the processing effect will be better..
  • * The handle strictly abides by the process of first vacuum quenching and then tapping to avoid the deformation caused by first tapping and then quenching. It is firm and durable and can prolong the service life..
Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Precision Twist 4ASM High Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 11.00mm (Pack of 6)

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16.
Check Stock

10 pcs 4-Flute End Mill Bits, AFUNTA 0.08\ - 0.47\ HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium

  • APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium..
  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency..
  • U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • MATERIAL: high speed steel, high hardness, good wear resistance and durability..
  • 10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in.
Check Stock

Jigging Reel Saltwater Slow Pitch Jigging Reels 6.3:1 Right Hand BalanZze 9BB+2RB 55lbs Drag High Speed Jigging Reels Conventional Reel Big Game Heavy Duty

  • Material of reels - The mainframe, spool, and side cover of this jigging reel are all made of high strength A6061-T6 aluminium alloy to ensure that the product can achieve a smooth surface and super-strength effect. This slow pitch jigging reel gear disc /gear /spindle is by stainless steel precision machining. Other spare parts are also stainless steel material, durable and not easy to wear.
  • Design of All-Metal bending rocker arm Is not easy to damage and deform. Well connected with the shaft, makes the reels more strong, guarantees the ability of haul line. More comfortable grip, storage is more convenient.
  • Offers Up to 66Lbs/30KG of carbon fiber drag, carbon drag delivers a wide range, smooth performance even when the reel is bathed in saltwater for hours (even days). The wrench design hides the crisp and loud sound structure, and the brake is adjustable for three gear positions FREE/STRIKE/FULL.
Check Stock

Custom Spec Wiring Kit For Jazz Bass CTS Pots .022uf 225P Orange Drop Cloth Wire

  • ?DECREASE NOISE COPPER SHAFT SLEEVE?The guitar wiring hareness pot is constructed with copper shaft sleeve to decrease noiseoffer and with excellent durability..
  • ?FINE MACHINING AND LIGHTWEIGHT? The electric guitar wiring harness kit adopts quality material and with fine machining and lightweight, the wires are anti aging and durable..
  • ?EASY TO INSTALL AND USE?This 3 way switch wiring harness is is completely prewired. What you need to do is solder your guitar pickups to the switch and ground them to the volume pot. It is very easy to install..
  • ?KIT INCLUDING?Three way switch kit with 2 volume, 2 tone and 1 jack wiring harness, the electric guitar wiring harness is perfect for electric guitars..
  • ?ESSENTIALS ACCESSORY? Thiswiring harness kit is essential for electric guitar. Also perfect musical gift for the guitar lovers..
Check Stock

MJIKOO 28-Piece Transfer Punch Set, 3/32 Inch - 1/2 Inch, Heat Treated Alloy Steel Forging,as shown

  • Each punch is a high quality heat treated alloy steel with durability and rust resistance of a black oxide film..
  • Takes the guesswork out of transferring threaded, drilled or reamed machining, drilling s,Drilling punch set includes easy-to-see index stand to keep tools stacked and ready to pull..
  • Precision indexing punch for tool builders and mechanics..
  • Wide set of transfer punches from 3/32 inch to 1/2 inch by 1/64 inch.
Check Stock