Top Alternator Bushing Installation Tool

Dorman 14104 Shift Cable Bushing Kit Compatible with Select Models (OE FIX)

  • Convenient solution - this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly.
  • Save time and money - save the expense and significant installation time of replacing an entire cable assembly.
  • Ensure fit - this bushing kit is vehicle-specific and precision-engineered for specified General Motors and Chrysler models and years.
  • Trustworthy quality - designed in the United States and backed by more than a century of automotive aftermarket excellence.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

APDTY 143243 Transmission Shift Cable Bushing Replacement Kit With Install Tool Replaces 68064273AB

  • Allows Replacement OF A Failed Bushing Instead Of Total Shift Cable Replacement.
  • Restores Shifting Ability From A Failed Shift Cable Bushing.
Check Stock

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

DEF Door Bushing Removal Tool Hinge Liners for Wrangler JK JKU JL JLU Gladiator JT 2007-2021 (Removal Tool and 2 Pins)

  • Fit: Door Bushing Removal Tool for Wrangler JK JL 4 Door 2008-2019 ..
  • Material: Made of stainless steel, great performance and repeated use are guaranteed. High quality bushings never rust .The inserts are made of plastic..
  • Function: These door pin guides help you line up your door pins and put your doors back easily. The door bushing removal tool helps to disassemble your Wrangler corrosive hinges..
  • Usage: By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally disassembled. If you find that it is not suitable for your car，use some type of grease or lube for the new bushings and use a rubber mallet to get them in place. Maybe it works well..
  • Package include: 1 silver door bushing removal tool, 8 bushings and 2 Pins.Door Bushing Removal Tool did not fit TJ.
Check Stock

Door Pin Guides Hinge Liners and Door Bushing Removal Tool Kits (8 Door Pin Guides) 17Pcs For 2007-2020 Jeep Wrangler JK JKU JL JLU

  • DURABLE MATERIA:The Door Bushing Removal Tool was constructed with strong iron.Advanced CNC machined aircraft grade stainless steel structure guides and durable ABS plastic integral molding process bushings, anti-corrosion and never rust..
  • FITMENT:Fit for Jeep Wrangler JK, JKU, JL, JLU, Sports, Sahara, Freedom, Rubicon, Unlimited 2007-2020. (Door Bushing Removal Tool did not fit TJ).
  • WIDELY USEFUL:These door pin guides help you line up your door pins and put your doors back easily.The door bushing removal tool helps to remove your Jeep corrosive hinges.By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally removed..
  • QUANTITY INCLUDED:8*Door Pin Guides,8*Door Hinge Liners,1*Door Bushing Removal Tool..
  • 100% SATISFACTION:If you are not satisfied with our kit,please contact us,we will try our best to solve your problem..
Check Stock

Hooke Road JK Wrangler Door Hinge Bushing Liners Replacement & Metal Door Bushing Removal Tool Compatible with Jeep Wrangler JK & Unlimited 2007-2018 - 8Pcs

  • FITMENT: Hooke Road Door Hinge Bushings Replacement Compatible with Jeep JK & Wrangler Unlimited 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018.
  • FUNCTION: Restores proper door alignment, snug fit while allowing your doors to open and shut smoothly. The door bushing removal tool helps to remove your Jk corrosive hinges. It will prevent hinge scratches during door removal..
  • MATERIAL: The door bushing removal tool and hinge liners were constructed with mixed metal, great performance and repeated use are guaranteed..
  • INSTALLATION: Install these while replacing the hinge liners and refinishing the hinge bolts. Align top cap then proceed to let door down and the bottom will fall into place..
  • PACKAGE CONTENTS: Includes 8 Door Hing Bushings, 1 Removal Tool, and 2 Sand Paper..
Check Stock

OEMTOOLS 24338 100A Battery Load Tester & Voltage Tester, Easy-to-Use Car Battery Tester, Works On Trucks, RVs, Golf Carts

  • SIMPLE, POWERFUL VOLTAGE TESTER: No need to go to the shop for a battery reading.
  • In 10 seconds our battery tester automotive tool will do its job.
  • Widely useful—tests the batteries of cars, trucks and RVs.
  • Can be used as a golf cart battery meter.
  • BATTERY AND ALTERNATOR TESTER: Get an easy reading with our battery analyzer.
  • The shock-resistant meter is housed in a steel case.
  • Doubles as an alternator tester and can easily tell you whether your alternator is properly charging your battery.
  • MADE FOR 6V AND 12V BATTERIES: These handheld 6v and 12v battery load testers are made for testing up to 1,000CCA.
  • Comes with heavy-duty copper-plated clamps.
  • It tests three aspects of battery health: battery condition, load, and alternator health.
  • VERSATILE BATTERY CHECKER: Many uses for our battery tester: automotive, golf carts, ATVs, etc..
  • Our automotive battery testers work on large and small batteries, installed and uninstalled.
  • Determines the state of charge, cranking, and charging volts.
  • EASY STORAGE & CARRY: The battery load tester 12v tool’s handle makes it easy to bring with you—store it in your car, truck, or RV.
  • Combine the 12v battery tester with a switch tester and test your vehicle's full electrical system.
Check Stock

Remanufactured DB Electrical Honda/Acura Alternator Replacement for Acura 3.5L MDX 03-09, Acura 3.5 L RL 05-07, Acura TL 04-08, Honda 3.5L Odyssey 05-07, Honda Pilot 05-08, Honda Ridgeline 06-08 (Renewed)

  • ...H-QUALITY CONSTRUCTION: The construction of this alternator is of the highest quality, ensuring that you receive a product that is built to last. The materials used in its construction are carefully selected to provide optimal performance, reliability, and durability.
  • EASY INSTALLATION: This alternator features a direct fit design, making it easy to install and requiring no modifications to your vehicle. The simple and straightforward installation process allows you to get your vehicle back on the road quickly and easily. The direct fit design of this alternator also ensures that you receive maximum output and optimal performance..
  • COMPATIBILITY: The DB Electrical 400-52252R alternator is compatible with/replacement for ACURA: 31100-RDJ-A01, 31100-RGL-A01, CSC10, CSD29, ARROWHEAD (OEM) (OLD): VND0339, ARROWHEAD (OEM): VND0339, ARROWHEAD (OLD): AND0308, AND0340, AND0408, ARROWHEAD: AND0339, DENSO: 104210-3100, 104210-4290, 104210-4300, 104210-4301, 104210-4690, DIXIE: A-80032, A-80312, A-80313, A-80337, FAMILY: Denso Hairpin, HONDA: 31100-RGL-A01, 31100-RGM-A01, 31100-RJA-A01, 31100-RJA-A02, 31100-RYP-A01, CSD29, CSD30, CSD69, J & N (OLD): 400-52163, J & N: 4....
Check Stock

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock

Alternator Regulator Plug Harness Lead Repair Pigtail， 3 Wires Regulator Plug Fits for Infiniti EX35 G35, Nissan 350Z Maxima Rogue, Saab, Suzuki, Audi A8

  • 【Function】Alternator Regulator Plug Location Used: Alternator Voltage Regulator / Plug Code 325, Length: 6.693in, Number of Wires: 3..
  • 【Compatibility】 Audi A8 Quattro RS7 S6 S7 S8, Infiniti G25 G35 G37 M35 M37 Q40 Q50 Q60 Q70 Q70L, Infiniti EX35 EX37 FX35 FX37 QX50 QX56 QX70, Nissan 350Z 370Z Altima Maxima Sentra Versa and so on..
  • 【Easy Installation】Easy Installation No Special Tools Required for Installation..
  • 【Premium Quality】Made of High Quality Material. Tested & Certified to Meet or Exceed OEM Quality Standards..
  • 【12-Month Warranty】The Alternator Regulator Plug Harness Lead Repair Pigtail come with 12 Months Warranty. Hassle-free Return and Refund Policy. Please Buy it with Your Confidence..
Check Stock

BXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 3/4" tool with bushing, 1" diameter without bushing.
Check Stock

AXA #4 QUICK CHANGE HEAVY DUTY BORING BAR CNC TOOL POST HOLDER 250-104

  • For use with AXA tool post 250-100 or 250-111. up to 12" swing..
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 5/8" tool with bushing, 3/4" diameter without bushing.
Check Stock