Top Alumina Cement

Tockrop 24 PCS 1/2″ x 10″ Knife Sharpener Sander Belt Set for Work Sharp WSCMB Combo Knife Sharpener- 4 PCS each of 80/120/240/400/1000/1200 Grits

• The 1/2″ x 10″ Replacement Belt Kit is for Work Sharp Combo Knife Sharpener (model WSCMB) and do not work with other Work Sharp products..
• 24 Pcs 1/2″ x 10″ Sanding Belts in total, including 4 pcs 80 Grits Zirconia belts, 4 pcs 120 Grits Zirconia belts, 4 pcs 240 Grits Alumina belts, 4 pcs 400 Grits Alumina belts, 4 pcs 1000 Grits silicon carbide belts and 4 pcs 1200 Grits silicon carbide belts..
• As a professional sanding belt manufacturer, after hundreds of trials, we find that for a knife sharpner, the best material for coarse grit is zirconia, for medium grit is alumina and for fine grit is silicon carbide. So we provide this Replacement Belt Kit for perfect sharpening..
• Precision engineered dual directional tape joints allow a smooth transition in either direction..
• Anti-clogging compounds extend the lifetime of the belts..

Denso (3297) SK20R11 Spark Plugs, Pack of 4

• Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
• Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
• Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.

Denso (4507) PQ16TT Platinum TT Spark Plug, (Pack of 1)

• Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
• Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
• Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.

NGK Spark Plug, NGK BPMR4A, ea, 1

• Designed to operate over a much wider heat range than ordinary plugs.
• High alumina ceramics for better heat transfer and electrical insulation.
• Solid copper core and nickel tipped electrode provide a longer plus life.
• Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
• You can depend on NGK for quality and reliability.
• Insulators constructed from 99 percent pure alumina silicate.
• Solid core offers superior heat dissipation and conductivity.

NGK Spark Plugs box of 10, BPMR4A

• Designed to operate over a much wider heat range than ordinary plugs.
• High alumina ceramics for better heat transfer and electrical insulation.
• Solid copper core and nickel tipped electrode provide a longer plus life.
• Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
• You can depend on NGK for quality and reliability.
• Insulators constructed from 99 percent pure alumina silicate.
• Solid core offers superior heat dissipation and conductivity.

1 qt Dap 31084 Bondex Ready-Mix Concrete Patch

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add pigment powder as follows: 1. Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25.
• 3. Pour the pigment powder into the cement. 4. Evenly mix cement and pigment powder. 5. Mix cement and pigment powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
• White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
• Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
• The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
• If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. T....

SK20HR11 3421 Iridium Spark Plugs Replacement For Lexus GX460 Toyota Benz Tundra SET (8)

• Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
• Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
• Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.

Bon 32-500 1 Pound Bag 3/4-Inch Anti-Crak Concrete Fibers (4, 3/4-Inch)

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
• 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
• White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
• Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
• The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
• If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. Thanks ).

Sandpaper 150 Grit, Wet Dry Sanding Sheets 9 x 11 Inch, Advanced White Fused Alumina Abrasive Sander Paper for Wood Furniture Finishing, Metal Sanding, Automotive Polishing, Purple,12-Sheets

• 【PREMIUM MATERIAL】Premium Wet Or Dry Sandpaper Is Constructed with white fused alumina abrasive which is the purest alumina(Alumina powder content 99%),Low heat generation and high grinding efficiency, Fast and long lasting cut with a consistent scratch pattern The purple abrasive will not discolor the surface you are sanding..
• 【WET AND DRY SANDING】Latex paper backing is waterproof,good flexibility,wear-resistant.Will not easily break and damage during use,the durable backing stands up to the job on wet or dry surfaces,Suitable for dry sanding and wet sanding without switching sandpaper..
• 【ELECTRO COATED TECHNOLOGY】 Electro coated ensures the grit distributed uniformly, anti-static,wear resisting and prevent clogging, Has Maximum Resistance To Clogging and Loading Which Increases Your Productivity and Reduced Material Consumption..
• 【MULTIFUNCTIONAL】Suitable for construction,carpentry,Auto Body Repair project,automotive polishing and home improvement projects,Suitable for wood,metal,plastic,drywall,fibreglass porcelain,art and craft as well as corner cleaning and polishing..
• 【EASY TO IDENTIFY】The grits of the sandpaper are printed on the back for easy identification,Product Size: 9 x 11 inches, Package Including : 12 sheets of 150 gri....

Sandpaper 80 Grit, Wet Dry Sanding Sheets 9 x 11 Inch, Advanced White Fused Alumina Abrasive Sander Paper for Wood Furniture Finishing, Metal Sanding, Automotive Polishing, Purple,12-Sheets

• 【PREMIUM MATERIAL】Premium Wet Or Dry Sandpaper Is Constructed with white fused alumina abrasive which is the purest alumina(Alumina powder content 99%),Low heat generation and high grinding efficiency, Fast and long lasting cut with a consistent scratch pattern The purple abrasive will not discolor the surface you are sanding..
• 【WET AND DRY SANDING】Latex paper backing is waterproof,good flexibility,wear-resistant.Will not easily break and damage during use,the durable backing stands up to the job on wet or dry surfaces,Suitable for dry sanding and wet sanding without switching sandpaper..
• 【ELECTRO COATED TECHNOLOGY】 Electro coated ensures the grit distributed uniformly, anti-static,wear resisting and prevent clogging, Has Maximum Resistance To Clogging and Loading Which Increases Your Productivity and Reduced Material Consumption..
• 【MULTIFUNCTIONAL】Suitable for construction,carpentry,Auto Body Repair project,automotive polishing and home improvement projects,Suitable for wood,metal,plastic,drywall,fibreglass porcelain,art and craft as well as corner cleaning and polishing..
• 【EASY TO IDENTIFY】The grits of the sandpaper are printed on the back for easy identification,Product Size: 9 x 11 inches, Package Including : 12 sheets of 80 grit....

5 X 6 FIBER CEMENT BLADE CARDED

GOODTAKE Orange Pigment Cement Pastel Tile Paint Color Pigment DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Cement Mortar Grout (Orange, 8 oz)

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
• 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 50 kg gray cement, add 2 to 3 kg of pigment, and add 100 kg of sand. White cement: 1 pack of 50 kg white cement, 1.5-2 kg paint and 100 kg sand..
• Make sure to mix the paint and cement dry powder first, then add water and stir!.