Top Aluminum Alloy Ingot

Steinwhale Flip Gate Latch Lock with Padlock Hole, 3.5mm Heavy Duty Aluminum Alloy Door Latch for Outdoor Wooden Fence, Swing Open Gate, Double Gate, Barn Door, Shed, Vinyl Fence, Yard (1, Black)

• 【Aluminum Alloy Made】Steinwhale flip gate latch lock is directly cut from an aluminum alloy ingot by CNC. The flip latch has no any welding trail on the surface. Together with 3.5mm thickness weighted 7.8 oz to ensure the latch is strong..
• 【Symmetric Plates with 8 Screws】 The gate latch has 2 mounting plates and in this mounted with 8 screws on your gate frame/fence door. Most latches in the market has only one mounting plate reducing the sturdiness and damaging the look of your door or gate..
• 【Adjustable PadLock Hole】The gate latch has a rounded retangle shaped lock hole which allow you to adjust the gap width between the mounting plates from 0.2'' to 1.4'' continuously to suit your doors. It can support padlocks with shackles small than 0.3''..
• 【Oxidation and Sand-Blasting Surface】 Same surface treatment as many consumer electronics like smartphone and laptop. The latch has a smooth skin like touch..
• 【3 Step Installation】Adjust the gap between the mounting plates. Mark all the drill holes on your door or gate. Drive all the 8 self....

Steinwhale 7.5" Flip Gate Latch Lock with Padlock Holes 2Pack, 4mm Heavy Duty Aluminum Alloy Door Latch for Outdoor Wooden Fence, Swing and Sliding Open Gate, Double Gate, Barn Door, Shed, Vinyl Fence

• 【Aluminum Alloy Made】Steinwhale flip gate latch lock is directly cut from an aluminum alloy ingot by CNC. The flip latch has no any welding trail on the surface. Together with 0.16inch (4mm) thickness weighted 11 oz to ensure the latch is strong..
• 【Symmetric Plates with 8 Screws】Steinwhale filp gate latch has 2 symmetric plates and 4 screws for each plate to be installed on your gate frame/fence door. While most latch in the market has only 1 plate reducing the studyness and damage the look of your door/gate/fence..
• 【Preset PadLock Holes】It is a latch and it can also be a lock. We have left 3 preset lock holes on the latch arm for you to put any locks up to diameter at 3/8”. You can adjust the lock hole as well as the gap between the two plates according to your need..
• 【Oxidation and Sand-Blasting Surface】Same surface treatment as many consumer electronics like smartphone and laptop. The latch has a smooth skin like touch..
• 【3 Step Installation】Adjust and align to 1 of the three lock holes. Mark the drill holes on your door. Drive all the 8 self-drilling screw....

Tin Ingot 2 pounds | 99.9+% Pure Raw Tin Metal by MS MetalShipper

• ✔️ Tin Ingot (2 pounds | 99.9+% Pure) Our 2lb Tin Ingots are approximately 2lbs each and you will receive two ingots totaling 2lbs. They are all sourced directly from the Minsur mine in Peru where they are produced and are 100% virgin metal (not recycled). We sell this metal in ingot form, so if you need 8lbs total, simply add a quantity of 4 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per ingot..
• ✔️ USAGE - This is high purity tin that can be confidently used in any application where tin is required. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Each tin ingot is approximately 4 inches long by 2 inches wide by 1.50 inches high. The exact size of each ingot will vary slightly..
• ✔️ SPECIFICATIONS - Meets ASTM B339 specification. * Atomic Number = 50 | Melting Point (F) = 450 | Atomic Mass= 118.71 | Boiling Point (F) = 4100 | Density (g/cm3) = 7.29. Analysis: TIN 99.9650%, ANTIMONY 0.0184%, LEAD 0.0049%, BISMUTH 0.0023%, COPPER 0.0020%..
• ✔️ PACKAGING - This 2lbs of tin ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..

Tin Ingot 4 pounds | 99.9+% Pure Raw Tin Metal by MS MetalShipper

• ✔️ Tin Ingot (4 pounds | 99.9+% Pure) Our 4lb Tin Ingots are approximately 2lbs each and you will receive two ingots totaling 4lbs. They are all sourced directly from the Minsur mine in Peru where they are produced and are 100% virgin metal (not recycled). We sell this metal in ingot form, so if you need 12lbs total, simply add a quantity of 3 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per ingot..
• ✔️ USAGE - This is high purity tin that can be confidently used in any application where tin is required. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Each tin ingot is approximately 4 inches long by 2 inches wide by 1.50 inches high. The exact size of each ingot will vary slightly..
• ✔️ SPECIFICATIONS - Meets ASTM B339 specification. * Atomic Number = 50 | Melting Point (F) = 450 | Atomic Mass= 118.71 | Boiling Point (F) = 4100 | Density (g/cm3) = 7.29. Analysis: TIN 99.9650%, ANTIMONY 0.0184%, LEAD 0.0049%, BISMUTH 0.0023%, COPPER 0.0020%..
• ✔️ PACKAGING - This 4lbs of tin ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..

Double Burner 15 KG Gas Metal Melting Furnace Propane Forge Casting Tool

• 【YAY! ENJOY THE MELTING! 】-Turning waste into treasure, 6KG of crucible capacity means you can direct smelting of CPU's for gold and precious metals recovery or turn those old aluminum cans into $.We help you convert those scraps of copper and rotten iron into beautiful works of art, and the value will be increased by a hundredfold immediately..
• 【POWERFUL HEAT PERFORMANCE】-Equipped with a single burner with 250000W/H power and adjustable 30 psi regulator propane maintains to maximize heat efficiency. Propane melting furnace can be heated up to 1300 °C / 2372 °F and can melt metals with a melting point below 1300 ° C in 15-20 Minutes such as gold, sterling silver, pure copper, and aluminum..
• 【TWO COMPACITY FOR FLEXIBILITY】-Large - 6KG of LARGE crucible capacity means you can melt more anything such as 12KG gold,7KG silver,6KG copper,1.6KG aluminum.Small- After melting into a pure metal liquid, an object is definitely needed to contain this high-temperature substance, so we intimately provide a 113ML Graphite Ingot Mold..
• 【OUTSTANDING HEAT INSULATION】-We beat the competition with 2" ceramic cotton + 1" refractory than competitor’s thin ceramic cotton version. Coated with our special refractory it can hold 2600° Fahrenheit (1425° Cel....

Graphite Ingot Mold Melting Casting Mould for Gold Silver Metal (85x45x30mm - 665g Gold/320g Silver)

• 【Ingot Size】For 665g Gold / 320g Silver.
• Inner 2.56x 1.18 x 0.78 inch (1.18 fl oz). Melting and casting metals such as Gold, Silver, Brass, Aluminum, Copper, Zinc, Plumbum, etc..
• 【Composition:】99.95% Graphite. Ash content less than 0.1%. Better for Refining than Silicon Carbide Graphite Crucibles..
• 【Warm-Tips】Pure graphite crucible can NOT be heating by carbon furnace or charcoal kiln. It will be oxidized and cracked.
• Pure graphite will start to oxidize at 752 °F （400℃). The withstand temperatures can be 3200 °F if you use Air Electric Furnace. The withstand temperatures can be 5000 °F if you use Vacuum or Gas Protection Furnace..
• 【Package】1x Graphite Casting Melting Ingot. Well Packaged to ensure the item will be safely delivered..

Grade A Tin 99.85% Minimum

• Approx. 5 lb 4-5 Ingot - This is a Lead Free Pewter, also referred to as a Britannia Alloy that works well in Spin Cast Molds for designs, such as Fashion (Costume) Jewelry, with thin cross sections or fine filigree and maximum detail requiring less malleability and more strength.

RotoMetals Low-Melting Point 158F Alloy Ingot

GreaTalent 7.5\ Flip Gate Latch Lock with Padlock Hole, 4mm Heavy Duty Aluminum Alloy Adjustable Door Latch for Sliding and Swing Open Door, Outdoor Gate, Wooden Fence, Barn Door, Shed, Garage, Yard

• 【Heavy Duty Aluminum Alloy】Unlike any other iron forged flip latch, Greatalent flip gate latch lock is directly cut from an aluminum alloy ingot by CNC machine. The flip latch has no any welding trail on the surface. Together with 4mm thickness weighted 11 oz to ensure the latch is strong, heavy duty and sturdy..
• 【Twin Symmetric Plates with 8 Screws】 The gate latch comes with 2 symmetric plates and 4 screws for each plate to be installed on the gate frame/fence door. Most latch in the market has only one plate reducing the sturdiness and damaging the look of your door or gate..
• 【3 Preset Padlock Holes】It is a latch and it can also be a lock. We have left 3 preset lock holes on the long latch arm for you to put any locks up to a diameter of 3/8”. You can adjust the lock hole as well as the gap between the two square plates according to your need..
• 【Smooth Sand-Blasting Oxidation Surface】 Same surface treatment as iPhone and many laptops. The door latch lock has smooth skin-like touch. Why choose the rough powder paint surface when you can have an elegant lock like this?.
• 【Three-Step Installation】Adjust and align to one of the three lock holes. Mark the drill holes on your door or gate. Drive all the 8 self-drilling screws to install ....

7 Pieces Graphite Torch Melting Casting Kit, Including 2 Graphite Crucible Stir Stick, Graphite Casting Mould 5-in-1 Graphite Casting Ingot Mould, Quartz Crucible, Cylindrical Graphite, Tong for Melt

• ...quartz crucible approx. 7 cm in diameter, 2.5 cm in height, tong about 10 inch in length, cylindrical graphite measures approx. 4 cm in diameter, 4 cm in height.
• Multipurpose: these graphite ingot moulds are widely and commonly applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and much more, also ideal for satisfying lab, test analysis and other purposes.
• Taking the product size into account, small-capacity metal melting projects will be more suitable.
• Reliable to use: high-density graphite materials, bring you nice using experience, and long time for you to apply, not easy to break or deform, you can also share them with your friends or family members.

3 Pieces Heart Star Cross Graphite Casting Ingot Mold Metal Refining Scrap Melting Casting Mould for Smelting Gold Silver Metal Aluminum Copper Brass Zinc

• ...ood impact resistance and corrosion resistance to acid and alkali, good in performance to ensure the reliability of product quality.
• A Wide Range of Application: the casting ingot mold has a wide range of application, suitable for experiments and melting of non ferrous metals, such as gold and silver, brass, copper, aluminum, zinc and so on, they can also be applied for test analysis tools and ingot mould for making bars or necklace pendant charms.
• What You Will Receive: the package will come with 3 pieces of graphite molds with exquisite craftsmanship and versatile usages, which can meet your daily needs of making necklace pendants.
• You can also invite your friends or family to enjoy handmade fun with you together.

BUNZL - 18x500 Heavy Duty Aluminum foil, EA1

• Approx. 5 lb 4-5 Ingot - This is a high purity Tin based Lead Free Pewter Alloy, that meets or exceeds most Lead Free requirements.
• We certify it to be less than 50 ppm Lead Content.
• It works well in Spin Cast Rubber or Silicone Molds for designs with thick cross sections or a smooth, polished finish and some malleability.