Top Aluminum Alloy Welding Wire rods

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

jidan Weld Wire Easy Melt Welding Rods for Welding Solde Low Temperature Easy Aluminum Welding Rods Weld Bars Cored Wire Rod Solder for Soldering Aluminum no Flux Solder Powder

  • Perfect welding effect :designed with full & smooth welding effect because the item comes with internal powder, great weldability and corrosion....
  • application :include welding filler wire and spray and flame metalizing wire. it also used for argon arc welding and filling material for pure....
  • widely use :this low temperature copper aluminum welding wire is suitable for welding or surfacing welding alloy/ stainless/galvanized steel/....
  • No Need Solder Powder - You don't have to use other flux powder with aluminum alloy as the welding core and coating as the salt base. Very convenient....
  • Widely Use In Life - Suitable for welding or surfacing welding alloy with high strength, good forgeability & good corrosion resistance..
Check Stock

Elecxlink Aluminum Welding Rods 20-Pack 15.8in 40cm Universal Low Temperature Aluminum Welding Cored Wire for Electric Power Chemistry

  • NO SOLDER POWDER NEEDED: there is no need to use other flux powder with aluminum alloy as the welding core and coating as the salt base..
  • HIGH QUALITY MATERIAL: made of aluminum material, nontoxic, odorless and durable material..
  • PERFECT WELDING EFFECT: designed with full & smooth welding effect because the item comes with internal powder, great weldability and corrosion....
  • APPLICATION: include welding filler wire and spray and flame metalizing wire. It also used for argon arc welding and filling material for pure....
  • WIDELY USE: suitable for welding or surfacing welding alloy with high strength, good forgeability & good corrosion resistance..
Check Stock

Aluminum Welding Rods 20-Pack Universal Low Temperature Aluminum Welding Cored Wire for Electric Power Chemistry Food Silver 0.08 x 10in/2 x 250mm 20-pack

  • WIDELY USE: suitable for welding or surfacing welding alloy with high strength, good forgeability & good corrosion resistance..
  • HIGH QUALITY MATERIAL: made of aluminum material, nontoxic, odorless and durable material..
  • NO SOLDER POWDER NEEDED: there is no need to use other flux powder with aluminum alloy as the welding core and coating as the salt base..
  • APPLICATION: include welding filler wire and spray and flame metalizing wire. It also used for argon arc welding and filling material for pure....
  • PERFECTWELDING EFFECT: designed with full & smooth welding effect because the item comes with internal powder, great weldability and corrosion....
Check Stock

AZZUNO 200A MIG Welder,110V/220V Dual Voltage multiprocess welder,Gas Gasless MIG Welding Machine,4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick ARC Welder (Grey)

  • 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose..
  • Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it..
  • Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 4.5mm..
  • Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 0.5MM-3MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E7018, E6013..
  • Powerful And Safe Machine:This 200A Welding machine can weld mild up to 4.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe..
Check Stock

Low Temp Aluminum-Zinc Brazing Rod 10/20/50Pcs 500mm x 2mm 3.5g Tube General Purpose Aluminum TIG Welding Rod No Need Solder Powder

  • 【Great Welding Effect】With full & smooth welding effect because of internal powder. With low melting point(647°~658°), great weldability and....
  • 【No Need Solder Powder】You don't have to use other flux powder with aluminum alloy as the welding core and coating as the salt base. Very....
  • 【Widely Use In Life】Suitable for welding or surfacing welding alloy with high strength, good forgeability & good corrosion resistance..
  • 【Very Wide Application】It is mainly used for argon arc welding and filling material for pure aluminum, connection with aluminum bus and guide rod....
  • 【Light Weight & Small Volume】 Size of 500 x 2mm & weight of 3.5g, very easy to bend & carry. Delivery: Ship From US, It Takes About One Week..
Check Stock

Aluminum Welder Machine 110/220V Mig Welding Equipment 210A Gas/Gasless RBM-2100D 4 in 1 2T/4T Tig Stick Mig Welding Flux Core Supports 2lbs/10lbs Wire(Need Spool Gun for Aluminum Welding)

  • [Gas/Gasless Welding Equipment] ①RBM-2100D supports gas(2/10lbs solid wire) welding,install V-shaped wire feed wheel adapts to 0.8/1.0mm wire.
  • gasless(2/10lbs flux core wire) welding,select the knurling wheel for 0.8/1.0mm wire.(the wheels are come together with machine).
  • [Spool Gun/Aluminum Welding Opinion] RBM-2100D supports welding with a spool gun(I can weld aluminum with this),please refer to the instruction manual for detail operation(spool gun is not included).
  • [ARC/TIG Welding] ARC/Stick welding is great for repairing broken fences or brackets,can weld with 3/32’’ - 1/8″6013/7018 rods.
  • Lift tig not high frequency tig, but also requires pure argon gas(tig torch is not included)..
  • [Duty Cycle] 110V-MIG: 60% at 30-140A,220V-MIG: 60% at 30-210A.
  • 110V-ARC: 60% at 30-100A,220V-ARC: 60% at 30-150A.
  • [Warranty] Buy with confidence cause Reboot provides 7*24H after-sale service,and 1-year limited warranty for this RBM-2100D..
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 9 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5500mAh for DIY Battery

  • ...peration more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
  • 【Intelligent and Safe】This upgraded mini spot welder has over-current protection, low and over voltage protection, and over-temperature protection. Intelligent output current. We offer 3 months free return and lifetime warranty for our spot welder..
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 30 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5500mAh for DIY Battery

  • ...peration more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
  • 【Intelligent and Safe】This upgraded mini spot welder has over-current protection, low and over voltage protection, and over-temperature protection. Intelligent output current. We offer 3 months free return and lifetime warranty for our spot welder..
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 30 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5000mAh for DIY Battery

  • ...peration more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
  • 【High Speed Battery】 After being fully charged, thousands of points can be continuously welded on a 0.1-0.15mm nickel sheet. With its own charging management control module, you can use the power bank to charge the spot welder..
  • 【Intelligent and Safe】This upgraded mini spot welder has over-current protection, low and over voltage protection, and over-temperature protection. Intelligent output current. We offer 3 months free return and lifetime warranty for our spot welder..
Check Stock

AmicoPower MTS-165, 165-Amp MIG MAG Lift-TIG Stick Arc Combo DC Inverter Welder, Compatible Spool Gun SPG15180

  • MTS-165 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 1/4 inch. The MTS-165 is the most efficient machine for every task..
  • The MTS-165 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-165 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-165 is designed and manufactured according to the highest....
Check Stock

MTS-205 205 Amp MIG/TIG-Torch/Stick Arc Combo Welder Weld Aluminum MIG 110/230V Dual Voltage Welding New

  • MTS-205 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 1/2 inch. The MTS-205 is the most efficient machine for every task..
  • The MTS-205 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-205 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-205 is designed and manufactured according to the highest....
Check Stock