Top Aluminum Angle Iron

Powermatic 31A Belt/Disc Sander, 1.5HP, 1PH 115/230V (1791291K)

  • SOLID CONSTRUCTION: Belt and disc tables are precision-ground cast iron with miter slots, for precision and rigidity..
  • SPEED: 12" disc spins at 2,375 RPM, and 6"x48" belt turns at 2,410 SFPM..
  • MULTI-POSITION BELT HEAD: Locks at any angle from 0° to 90°.
  • includes indexing pin for 0, 45°, and 90° stops..
  • VERSATILE: Belt and disc sanding allows for multiple sanding angles..
  • SMOOTH SANDING: Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support..
Check Stock

Tuimiyisou Bosshead Clamp Holder Adjustable Laboratory Support Fixture Iron Frame Accessories 20MM 5PCS Laboratory Equipment & Supplies

  • A set of 5 adjustable boss head clamps, aluminum alloy body right-angle clamps.
  • Aluminum Cross Clip is very suitable for stabilizing fixtures that do not require special support, excellent laboratory iron clamps, fixture accessories commonly used in the laboratory.
  • Lab Stand Clamp Hold is made of aluminum and is very light, with screws for fixing the clip on the bracket rod.
  • Large, easy-to-turn knobs help provide additional leverage for simple and accurate adjustments..
  • The Bosshead Clamp Holder is used to hold clips in laboratories and research institutions.
Check Stock

TOLESA Honing Guide Jig for Wood Chisel Edge Sharpening Holder, (Chisels 1/8' to 1-7/8”, Planer Blades 1-3/8” to 3-1/8”)

  • ...nce of the blade. Chisel projection: 30mm for 30° and 40mm for 25° angles. Plane iron projection: 38mm for 30° and 50mm for 25° angles. We have included these wizards on the edge sharpening guide for your adjustment reference.
  • 【High Quality Metal】 - TOLESA Chisel Sharpener is made of stainless steel and cast aluminum with anti-rust coating, which is strong and durable. The ball bearing of eclipse honing guide slides smoothly and is not easy to wear on the sharpening stone and whetstone.
  • 【Multipurpose Tool】- Honing guide can be used for Wood Chisel, Planer, Blade, Graver, Graving Knife, Plane Iron, Flat Chisel, Edge Sharpening. And easily works on both oilstones and Waterstones.
Check Stock

Ullman Devices Ullman HT-55FL Extra Long Flexible Magnet Pick-Up Tool

  • Neodymium-iron-boron high-flux magnet lifts up to 8 lbs.
  • Designed with extra length and a strong rare-earth magnet to sweep and remove metals filings from Diesel truck fuel tanks.
  • Long aluminum shaft can be bent at any angle to retrieve metals objects in hard to reach areas.
  • Comfortable textured cushioned grip will not slip in wet or oily handsDescriptionFeatures: flexible Shaft, pickup Length 55 inches, pull capacity 5 lb., lifting capacity 5 lb., Aluminum and neodymium iron Boron magnet. Magnet designed to be used to pick up ferrous metal objects in hard to reach areas. Use for retrieval of ferrous metal. Ullman devices has been setting the industry quality standard for 81 years and is the worlds leading manufacturer of inspection mirrors and magnetic Pick-Up tools. Over the years, Ullman has broadened its product line to include socket holders, flexible spring Claws, screw Starters, rotating magnetic work lights, Carbide Scribers, hooks, Picks and various other specialty tools..
Check Stock

Rannb HSS Hole Saw Drill Bit for Metal, Copper, Stainless Steel, Iron Plate 5/8\ Cutting Dia - 2pcs

  • 【Material】The hole saw is made of high speed steel with good wear resistance and corrosive resistance..
  • Triangle Shank Size:7.5mm/0.295"(Angle to Angle).
  • 【Package Content】2pcs x Hole Saw with plastic case + 2pcs x L Wrench.
  • 【Applicable Material】Suitable for drilling hole in iron sheet, stainless steel, aluminum alloy, U steel and etc..
  • 【Applicable Equipment】The hole saw can be used with electric hand drill, bench drill and etc..
Check Stock

3 Barrel Curling Iron Hot Tools Curling Iron Fast Heating Ceramic Hair Waver Curler 25mm Hair Curling Wand (style1)

  • Material of Hot Tools Curling Iron: The material of the barrels is aluminum alloy. The curling wand is harmless to your hair when heating. The handle is non-slip silicone for easy and convenient use..
  • Instant Heat: This 3 Barrel Waver Iron has PTC heater, 30s fast heating. And can heat up to max 410℉(210℃) in 60s,Perfect for shaping/curling professional hair wave, negative ion for hair care..
  • Features of Curling Iron: This deep waver shows temperature setting of 176-410℉(80-210℃) ,allow you to choose correct temperature according to your hair. Easily get a silky, wave, long-lasting perfect professional styling..
  • 360 degree rotatable wire can let you hold curling iron wand at any angle for the best wave result. It’s a perfect gift for Christmas/Holiday/Birthday/Valentine..
  • The wand curling iron is suitable for long and thick hair. Loose wave fit for dating, party, evening, wedding. With this hair curling wands, you will easily get the professional effects at home or travel..
Check Stock

New Metal Nibbler Drill Attachment, Electric Sheet Metal Cutter, Electric Drill Plate Cutter, Electric Drill Shears Attachment Cutter Nibbler

  • ...orrosion resistant, not easy to break and deform, can be used for a long time..
  • 【Cutting Range】The metal nibbler drill attachment is suitable for cutting flat sheet metal less than 1mm. This nibbler attachment can handle iron sheet(0.2-1mm), white sheet (0.3-1mm), steel sheet(0.2-0.8mm), copper sheet(0.3-1.2mm), aluminum sheet(0.3-1.2mm)..
  • 【Wide Compatibility】The Electric Drill Shears has a wide range of application and is compatible with most of the hand drills, lithium drills and impact drills in the market. It can be used to cut all kinds of metal plates, such as aluminum, steel, iron, copper and other alloy materials..
  • 【Warm Remind】 We do not recommend cutting stainless steel and special high hardness alloy material, otherwise it will damage the machine. If stainless steel must be cut, the thickness of stainless steel must not exceed 0.5 mm..
  • 【Package Contents】 The package includes 1 electric drill plate cutter (drill not included), 1 large wrench, 1 small angle wrench, 1 L-shaped wrench and 1 instruction manual. The blade is very sharp, so please be careful when using it..
Check Stock

2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc

  • ▶️ High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow.
  • ▶️ This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
  • ▶️ Lighter than Iron Heads. Each Head weighs 10.33kg.
Check Stock

Powermatic 31A, 6" x 48" Belt and 12" Disc Sander, 2 HP, 3Ph 230/460V (1791292K)

  • SOLID CONSTRUCTION: Belt and disc tables are precision-ground cast iron with miter slots, for precision and rigidity..
  • SPEED: 12" disc spins at 2,375 RPM, and 6"x48" belt turns at 2,410 SFPM..
  • MULTI-POSITION BELT HEAD: Locks at any angle from 0° to 90°.
  • includes indexing pin for 0, 45°, and 90° stops..
  • VERSATILE: Belt and disc sanding allows for multiple sanding angles..
  • SMOOTH SANDING: Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support..
Check Stock

Urtzcoye Cordless Electric Variable Speed Angle Grinder Power Tools with Battery | Angle Grinder Stand Holder | Cutting Wheel | Grinding Wheel | Angle Grinder Wrench | Battery Charger (21V)

  • Quick clamp swing angle：0 degree - 45 degree.
  • Appr. Size: 9 1/2in(L) * 7 1/2in(W) * 11in(H).
  • Application: hold 4 inch or 5 inch angle grinder (100mm to 125mm).
  • If you have questions for installation, please feel free to contact us, we can offer you installation video. Thank you..
Check Stock

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

  • Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories：Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
  • Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).
Check Stock

US Stock M3-M16 Electric Tapping Machine 375rpm 110V Flex Tapping Arm Machine ANSI Full Set Tap Collets Holder Included

  • M16R electric tapping machine has manual, automatic and gap 3 modes for your choice. Automatic mode can control the depth of tapping effectively to realize blind tapping.
  • Tapping angle: Universal. Tapping Capacity Stainless steel/Steel: M3-M16, Aluminum: M3-M16, Working Area Horizontal: 1045mm(41.1inch) Weight: 32KG (70.5lb.) Vertical: 400mm adjustable.
  • Main parts for tapping machine, import servo motor, HD human machine interface, high-precision cantilever bracket, universal head(tapping for vertical/horizontal), import tap collet(standard).
  • Applicable materials: aluminum, copper, A3 steel, 45 steel, cast iron, pig iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials, plastic and wood and other materials.
  • 1-year warranty. Free shipping to your door. Standard equipped tap collet size: ANSI standard M3,M4,M5,M6-M8,M10,M12,M14 and M16. 8PCS in total. If you need ISO/JIS or DIN standard collet, please leave a message.
Check Stock