Top Aluminum Boat Paint Red

Boatbuilding For Beginners : Everything You Need To Know To Build, Paint And Fiberglass Your Boat

  • ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season.
  • ideal for fiberglass, wood and steel boats in salt water and fresh water.
  • ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water.
  • minimizes bottom paint build up so you have less sanding to do next season.
  • durable finish can be burnished for smoothness, speed & fuel efficiency.
  • LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
  • ideal for use in marinas and boat yards with environmental restrictions.
  • EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush - natural bristle.
  • Roller - 3/16” nap or foam solvent-safe cover.
  • AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
  • Coverage: 500 sq. ft. per gallon. Compati....
Check Stock

TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | For Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Red, Gallon)

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock

TotalBoat Spartan Boat Bottom Paint | Multi-Season Marine Antifouling (Blue, Quart)

  • MARINE BOTTOM PAINT FOR MULTI-SEASON PROTECTION IN HIGH FOULING CONDITIONS: High copper content (38% cuprous oxide) for maximum antifouling protection against barnacles & slime for sailboats & power boats in fresh, salt and brackish waters.
  • SMOOTH, ABRASION-RESISTANT FINISH FOR MAXIMUM PERFORMANCE: Offers maximum speed and fuel efficiency.
  • advanced copolymer ablative formula offers continuous antifouling protection whether the boat is at anchor or underway.
  • HAUL AND RELAUNCH WITHOUT REPAINTING: Hauled your boat for longer than 2 weeks? Simply scuff lightly to reactivate this paint's antifouling properties.
  • ablative formula reduces paint buildup, which means no heavy sanding next time you apply bottom paint.
  • EASY TO APPLY, DRIES FAST: Apply by brushing, rolling or spraying on fiberglass, wood, steel and previously painted surfaces in good conditions. THINNING: Brush/roller application - TotalBoat Special Brushing Thinner 100.
  • Spray application - TotalBoat Spray Thinner 101.
  • AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Gallon size.
  • Black and Blue are also available in Quarts.
  • NOTE: This paint has no maximum dry time before launching your boat is required.
Check Stock

TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Black, Gallon)

  • ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection.
  • copper biocide keeps barnacles and mussels from clinging to hull bottoms.
  • ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions.
  • EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat.
  • durable finish withstands trailering & beaching better than traditional ablative paints.
  • FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS.
  • because the ablative coating wears away during the season, there’s no paint buildup, which makes your bottom paint job easier next season.
  • EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller – TotalBoat Special Brushing Thinner 100.
  • spray equipment – TotalBoat Spray Thinner 101.
  • AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
  • this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only.
Check Stock

TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Red, Gallon)

  • ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection.
  • copper biocide keeps barnacles and mussels from clinging to hull bottoms.
  • ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions.
  • EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat.
  • durable finish withstands trailering & beaching better than traditional ablative paints.
  • FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS.
  • because the ablative coating wears away during the season, there's no paint buildup, which makes your bottom paint job easier next season.
  • EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller - TotalBoat Special Brushing Thinner 100.
  • spray equipment - TotalBoat Spray Thinner 101.
  • AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
  • this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only.
Check Stock

TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Blue, Gallon)

  • ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection.
  • copper biocide keeps barnacles and mussels from clinging to hull bottoms.
  • ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions.
  • EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat.
  • durable finish withstands trailering & beaching better than traditional ablative paints.
  • FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS.
  • because the ablative coating wears away during the season, there's no paint buildup, which makes your bottom paint job easier next season.
  • EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller - TotalBoat Special Brushing Thinner 100.
  • spray equipment - TotalBoat Spray Thinner 101.
  • AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
Check Stock

Otherkin Tarot

  • UNIQUE NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives: One part polyurethane non-skid deck paint creates a durable, high-traction surface for comfortable, secure footing and a finish that's less abrasive than traditional silica additives.
  • LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel.
  • easy to clean - scrubbing won't wear away the finish.
  • affordable way to bring your old boat flooring back to life.
  • NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing.
  • 1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
  • add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
  • COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons.
Check Stock

Wayside Pond

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant cruiser blue finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-quart container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
Check Stock

TotalBoat Spartan Antifouling Bottom Paint for Boats - Multi-Season Protection for Fiberglass Wood and Steel Black Gallon

  • MARINE BOTTOM PAINT FOR MULTI-SEASON PROTECTION IN HIGH FOULING CONDITIONS: High copper content (38% cuprous oxide) for maximum antifouling protection against barnacles & slime for sailboats & power boats in fresh, salt and brackish waters.
  • SMOOTH, ABRASION-RESISTANT FINISH FOR MAXIMUM PERFORMANCE: Offers maximum speed and fuel efficiency.
  • advanced copolymer ablative formula offers continuous antifouling protection whether the boat is at anchor or underway.
  • HAUL AND RELAUNCH WITHOUT REPAINTING: Hauled your boat for longer than 2 weeks? Simply scuff lightly to reactivate this paint's antifouling properties.
  • ablative formula reduces paint buildup, which means no heavy sanding next time you apply bottom paint.
  • EASY TO APPLY, DRIES FAST: Apply by brushing, rolling or spraying on fiberglass, wood, steel and previously painted surfaces in good conditions. THINNING: Brush/roller application - TotalBoat Special Brushing Thinner 100.
  • Spray application - TotalBoat Spray Thinner 101.
  • AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Gallon size.
  • Black and Blue are also available in Quarts.
  • NOTE: This paint has no maximum dry time before launching your boat is required.
Check Stock

TotalBoat Epoxy Primer Thinner 200 Marine Solvent Quart

  • Marine solvent specially formulated for thinning or reducing TotalBoat TotalProtect, TotalBoat Aluminum Boat Barrier Coat, and TotalBoat 2-Part Epoxy....
  • Perfect for brush, roller, or spray applications.
  • Ideal surface prep solvent wipe for rubberized inflatable materials prior to applying TotalBoat Inflatable Boat Paint.
  • Makes it easy to remove paint from tools and equipment after painting is done.
  • Available in Quart size. 100% made in the USA. Use only with the TotalBoat products specified.
Check Stock

SAMURAI Spray Paint for Marine 2-Part Polyurethane marine Spray Paint with UV Resistant and Rust Resistant Paint repairing protection for sailboat hulls yacht boats and more (WHITE, Pack of 1 Can)

  • ... against 1-Part paint and no mess to clean up..
  • ✅ [[More Durable, tougher than 1K] 2k spray paint for boat provides 100% UV protection and superior scratch and chemical resistance compared to 1K paint. Durable polyurethane finish is easy to clean.
  • won't fade, crack or peel. Perfect for boat body, fiberglass, wood, aluminum or other metal..
  • [Easy to Use] Professional aerosol spray that contains 2 nozzles in one can. Start spraying in just a few steps. Hit, shaking,than spray. Compared to brushes and rollers, spraying can reach hard-to-reach areas, making it a hassle-free and user-friendly alternative to older methods. Just the professional DIY repair you need, saving you money and time..
  • ✅ [[Good Coverage and Finish] The nozzle ensure the right ratio is mixed every time. Sprays like a gun. This boat spray applies smoothly and provides great coverage. No run and sag. You'll achieve professional results from an easy-to-spray aerosol..
  • ✅ [More Color for Your Choices] Available in a variety of colors, easy to match the color of your boat. So you can choose a single color or use different colors to create your own multi-color customized look. In 1(one) of our polyurethane paint, you get enough to cover surface area about 10 to 12 ft² with 2 coats. 48h p....
Check Stock

Canopus - 3M Scotch Brite Scuff Pads Very Fine and Ultra Fine (5+5)

  • 5Pk Grey Detail Sander + 5pk Red Maroon Scotch Brite pads, Scouring Pads, 3M Sandpaper Equivalent.
  • Load resistant, Performs like steel wool grade 00 without splintering, Ultra fine consistent finish.
  • Excellent general purpose sanding pads for prepping, final finishing and light cleaning, automotive primer, for final sanding of primer-surfacer, does not rust like steel wool.
  • Scotch Brite sponges may be used by hand sander, orbital sander, lathe tools and as boat accessories or auto body tools.
  • Aluminum Oxide, Made of nylon web,Designed for scuffing before applying paint and primer-surfacer like automotive sandpaper.
Check Stock