Top Aluminum Cast Coil

Memphis Audio MOJO 1212 12" 3000 Watt Competition Car Subwoofer Sub MOJO1212

  • 1Ω or 2Ω ohm selectable impedance RMS: 1500 watts Peak: 3000 watts.
  • 3.5” aluminum triple voice coil Vented cast aluminum basket Double stitched rubber surround.
  • DVVC Direct Vent Voice Coil Cooling 250 oz magnet Light weight Polypropylene dustcap.
  • Reinforced spider Folded surround for increased excursion without sacrificing effective surface area Sensor: 83 dB.
Check Stock

Tektall LS Finned Cast Aluminum Valve Covers with Coil Mounts and Covers Compatible with Che-vy Small Block SB V8 293 325 376 427, Black

  • 【Top Quality】 Made of Highly durable Cast Aluminum . High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably..
  • 【Fitment】 Fits for Chev-rolet small block V8 gen. III/IV (LS BASED) 4.8 5.3 5.7 6.0 6.2 7.0.
  • 【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration. Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ TSP 81015) LS style ignition coils..
  • 【Features】 The base has a tall internal height to allow for added valvetrain clearance and no brackets required. It also features a baffled stock-style ventilation set-up. The coil cover features cut-outs for routing the wiring harness and spark plug wires and comes with a classic, finned top..
  • 【Package includes】 Coil Cover Mounting Hardware, Coil Hardware & Spacers, Low-Profile Oil Fill Caps and Valve Cover Gaskets.
Check Stock

Tektall LS Smooth Cast Aluminum Valve Covers with Coil Mounts and Covers Compatible with Che-vy Small Block SB V8 293 325 376 427, Black

  • 【Top Quality】 Made of Highly durable Cast Aluminum . High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably.
  • 【Fitment】 Compatible with Che-vy Small Block SB V8 293 325 376 427, Black. Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ 81015) LS style ignition coils.Valve Cover Base Mounts to LS1, LS2, LS3, LS6, and LS7 Engines..
  • 【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration..
  • 【Features】 The base has a tall internal height to allow for added valvetrain clearance and no brackets required. It also features a baffled stock-style ventilation set-up. The coil cover features cut-outs for routing the wiring harness and spark plug wires and comes with a classic, finned top..
  • 【Package Included】 Coil Cover Mounting Hardware, Coil Hardware & Spacers, Low-profile Oil Fill Caps and Valve Cover Gaskets.
Check Stock

Soundstream T5.104 Subwoofer

  • Key components that you expect from T5 still remain.
  • big ass 1,000w 3” voice coil, triple-stack magnet structure, high-density Spruce pulp sub-cone, and the iconic black-on-black Soundstream spider..
  • Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics | Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up.
  • Non-magnetic non-resonate die-cast aluminum frame | 3” 4-layer voice coil w/ direct connect wire increases power handling | high-temperature tolerance adhesives resist thermal failure.
  • Extended excursion polyether foam Surround w/ UV & chemical protection | Dual poly-cotton Suspension dampen violent accelerations | 1-pc gasket/trim ring w/ concealed mounting holes included.
  • Max power (watts) 1, 800 | RMS power (watts) 900 | efficiency (1W/1M dB) 83.5Db | voice coil configuration 3″ dvc 4Ω.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

Holley 241-91 Aluminum Satin Black LS Chevy Valve Covers LS1 LS2 LS3 LS6 LS7 LSX

  • Angled coil mounts deliver a smooth clean look.
  • Retain the high-tech look and performance of “coil on cover”.
  • Eliminates unsightly OE style coil brackets.
  • Also available in Natural Cast & Polished.
Check Stock

-2- Ignite Pro Series 3000W Titanium 4

  • 4" Super Tweeters, 1.5" High Temperature Kapton Voice Coil.
  • Dimond Chrome Cutting Finish, Die Cast Aluminum Frame.
  • Peak Power Handling- 1500W(Per Tweeter)/ RMS Power Handling: 450W (Per Tweeter).
  • Impedance: 8 Ohms / Tweeter Size: 4" Square.
  • Ferro Rluid Enhanced Voice Coil/ Sensitivity: 109 dB/ Frequency Response: 3k-22kHz.
Check Stock

Memphis Audio MOJO615D4 MOJO 2200 Watt RMS 15 Dual 4 Ohm Subwoofer

  • Features: Vented cast aluminum basket, 4-layer CCAW 3.5" voice coil, 235oz magnet, Fiberglass reinforced cone, Double stitched rubber surround,....
  • Specifications: 2200W RMS, 4400W Maximum Power, 85dB Sensitivity, 4-Ohm Impedance, 15 Inch Diameter, Dual Voice Coil, and 9.44" Mounting Depth.
Check Stock

Rockville HT120 2 360w Car/Pro Aluminum Horn Titanium Tweeter w/ 2 Voice Coil Black

  • What's in the Box: (1) HT120 Tweeter pre-Installed in an aluminum horn, Mounting Screws, Warranty Card, Owner's Manual.
  • Rockville HT120 360w Aluminum Horn Titanium Tweeter with 2" Voice Coil, Top of the line Rockville high frequency driver pre installed in an aluminum horn, Titanium diaphragm tweeter, Bolt-on style system, Type: Compression driver.
  • RMS Power: 120W, MAX Power: 360W, Sensitivity: 105dB @ 1w / 1m, 34 oz Magnet, 2” High Temperature Die Cast Kapton Voice Coil.
  • Ferro Fluid Enhanced Voice Coil Cooling, Impedance: 8 Ohms, Frequency Response: 800Hz - 20kHz, We recommend using a crossover that cuts frequencies below 1500 to 3000Hz at -12dB per octave, Our metal horns are heavier and a denser material which ensures they will not generate resonances and unwanted vibrations that can alter the response of the speaker. Also our metal horns will never break even if you go over bumps while driving.
  • Horn Dimensions: 6.2” x 6.2” x 5.1” (158 x 158 x 130 mm), Throat Diameter: 2", Overall Depth: 7.6” (193 mm), Cutout Diameter: 5.79”, Mounting Depth: 7.36”, Extremely loud and clear highs with an amazing frequency response that can even play some mids, Shallow Mounting Depth.
Check Stock

Holley - 241-298 Valve Cover Adapter Plates - Pair

  • Available in three finishes, Natural Cast, Black Painted, and Polished Finish.
  • Includes all mounting hardware that allows mounting of three different generations of coil packs.
Check Stock

Power Acoustik BAMF-122 Bumper-122 Subwoofer 3500 Watts 12 inches Dual Suspension,Black

  • 3" dual 2Ω, 4-layer voice-coil configuration with direct-connect wire increases power handling.
  • Overcompensating motor structure for increased magnetic strength.
  • 12mm T-yoke & top plate improve low-frequency dynamics.
  • Vented T-yoke & frame reduce voice-coil heat buildup.
  • Nonmagnetic, nonresonant die-cast aluminum frame.
Check Stock