Top Aluminum Coil - BuyWiseBest.com

SA-8 V.3 D4 - Sundown Audio 8' 500W RMS Dual 4-Ohm SA Series Subwoofer

Stitched-On Double High-Power Tinsel Lead Wires.
Black Aluminum 2.5” voice coil former for superior heat dissipation.
Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling.
High strength & patented cast aluminum frame.

What's in the Box: (1) HT120 Tweeter pre-Installed in an aluminum horn, Mounting Screws, Warranty Card, Owner's Manual.
Rockville HT120 360w Aluminum Horn Titanium Tweeter with 2" Voice Coil, Top of the line Rockville high frequency driver pre installed in an aluminum horn, Titanium diaphragm tweeter, Bolt-on style system, Type: Compression driver.
RMS Power: 120W, MAX Power: 360W, Sensitivity: 105dB @ 1w / 1m, 34 oz Magnet, 2” High Temperature Die Cast Kapton Voice Coil.
Ferro Fluid Enhanced Voice Coil Cooling, Impedance: 8 Ohms, Frequency Response: 800Hz - 20kHz, We recommend using a crossover that cuts frequencies below 1500 to 3000Hz at -12dB per octave, Our metal horns are heavier and a denser material which ensures they will not generate resonances and unwanted vibrations that can alter the response of the speaker. Also our metal horns will never break even if you go over bumps while driving.
Horn Dimensions: 6.2” x 6.2” x 5.1” (158 x 158 x 130 mm), Throat Diameter: 2", Overall Depth: 7.6” (193 mm), Cutout Diameter: 5.79”, Mounting Depth: 7.36”, Extremely loud and clear highs with an amazing frequency response that can even play some mids, Shallow Mounting Depth.

1Ω or 2Ω ohm selectable impedance RMS: 1500 watts Peak: 3000 watts.
3.5” aluminum triple voice coil Vented cast aluminum basket Double stitched rubber surround.
DVVC Direct Vent Voice Coil Cooling 250 oz magnet Light weight Polypropylene dustcap.
Reinforced spider Folded surround for increased excursion without sacrificing effective surface area Sensor: 83 dB.

2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
Non-Pressed Pulp Cone, Polyether Foam Surround. RMS power handling: 1,500, efficiency (1w/1m): 85.40.
Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.

Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling.
Black Aluminum 2.5” voice coil former for superior heat dissipation.

2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
Non-Pressed Pulp Cone, Polyether Foam Surround.
Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.

Key components that you expect from T5 still remain.
big ass 1,000w 3” voice coil, triple-stack magnet structure, high-density Spruce pulp sub-cone, and the iconic black-on-black Soundstream spider..
Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics | Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up.
Non-magnetic non-resonate die-cast aluminum frame | 3” 4-layer voice coil w/ direct connect wire increases power handling | high-temperature tolerance adhesives resist thermal failure.
Extended excursion polyether foam Surround w/ UV & chemical protection | Dual poly-cotton Suspension dampen violent accelerations | 1-pc gasket/trim ring w/ concealed mounting holes included.
Max power (watts) 1, 800 | RMS power (watts) 900 | efficiency (1W/1M dB) 83.5Db | voice coil configuration 3″ dvc 4Ω.

2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
Non-Pressed Pulp Cone, Polyether Foam Surround. RMS power handling: 1,500, efficiency (1w/1m): 85.40.
Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.

THE SPRING THAT SINGS | Simply use the included stainless steel beater to achieve an array of metallic effects including a finger cymbal ding, a dark metallic coil hit, and a long scrape of the coil. Playing only takes one hand, so it's easy to mute or stretch the coil for even more sound manipulation..
PROUDLY MADE IN THE USA | The TREcoil is made from a 1/4" rod of solid Aluminum/Titanium alloy that is hand-bent and tested by ear in our workshop just north of Nashville, TN..
FORGED FOR SUPERIOR STRENGTH AND SOUND QUALITY | Each coil undergoes high temperature heat treating to harden the metal and to add depth to its sound. The mantle secures the coil in place with a super durable polyurethane coated braided steel cord to keep your triangles hanging year after year..
A SAFE AND CONVENIENT MOUNT | The coil is removable and interchangable with other hanging instruments, making this an invaluable addition to your percussion section. The included stainless steel beater slides easily into a hole drilled in the top of the mantle for storage between uses..
DIMENSIONS | The TREcoil is 5" in diameter and 19" inches in length and comes with one Light Triangle Beater (TREbtr-LTE) that is 8 1/4 x 3/8 x 1/4 inches in dimension..

300 Watts RMS / 600 Watts Peak Power Handling - 50 oz. Magnet Structure.
Midrange / Tweeter Compression Driver - 2.84'' (72.2mm) Flat Aluminum Voice Coil - Titanium Diaphram.
Sensitivity (1w/1m): 107dB SPL - Frequency Response: 500Hz ~ 18kHz.
Midrange/Tweeter Compression Horn Driver.
Titanium Diaphragm, 2 Flat Aluminum Voice Coil.

Perfect choice -----The ABS head is easy to insert and durable, making it the right choice. ignition coil tester.
Function-----You can quickly and easily diagnose whether the ignition system of the car is working properly, avoid fire, and burn out the ignition coil. for automotive electronic fault detector ignition coil tester car ignition coil tester.
With LED indicator light -----The internal LED light will show you if the ignition system is normal. for coil pack tester mst 101.
Safe & Reliable-----It provides a safe and reliable troubleshooting method that is convenient, economical and time-saving. for spark plugs and coil tester small engine spark tester.
Premium material-----Made of high quality aluminum material which is characterized by its high hardness and corrosion resistance, ensuring long-lasting durability. for spark tester automotive electronic fault detector ignition coil tester.