Top Aluminum Conduit Fittings

Hubbell-Bell 5363-0 Round Weatherproof Extension Adapter, 18.3 Cu-in, 4 in Dia X 1-1/2 in D, Gray, 4-Inch

  • State-of-the-art powder coat finish provides maximum weatherability and scratch resistance..
  • Hubs accept all threaded fittings and threaded conduit..
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1/2inch50ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,1/2 in Dia

  • 【PREMIUM Liquid-Tight Conduit】- Length:50",ID:1/2inch,OD:0.83inch,Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical....
  • 【Complete Accessories】-1/2-Inch 50 Foot Flexible Electrical Conduit with 5 Straight and 390-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

(1 1/4\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling.
  • Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • Integral Rigid and Flexible PVC Construction, UL Rating 140 degrees F.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
Check Stock

Klein Tools 85191 Screwdriver / Conduit Reamer Conduit Fitting and Reaming Screwdriver for 1/2-Inch 3/4-Inch and 1-Inch Thin-Wall Conduit

  • Reamer's hooded-blade design keeps tip from slipping out of screws, especially when tightening hard-to-reach conduit fittings.
  • Reams and smooths 1/2-Inch (13 mm), 3/4-Inch (19 mm), and 1-Inch (25 mm) thin-wall conduit ends to protect wire and permit correct installation of....
  • Reams both the inside and outside of the conduit at the same time.
  • Longer Cushion-Grip handle provides comfort and more torque for reaming.
Check Stock

2" x 100' 10 Mil Pipe Wrap Tape

  • Corrosion protection for metal piping systems above and below ground..
  • Corrosion protection for fittings and joints on mill coated pipe..
  • Corrosion protection of electrical conduit & fittings..
  • Resists corrosive action by salt water, soil acids, alkalies and salts..
  • Prevents dielectric corrosion between buried steel pipe and soil minerals..
Check Stock

BELL 5400-5 Extension Box Adapter, 1 Gang, 9.5 Cu-in, 5-1/4 in L X 3-1/2 in W X 1-1/2 in D, 1/2 In. NPT , Gray

  • State of the art powder coat finish provides maximum weather ability and scratch resistance.
  • Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit.
  • Three 1/2 In closure plugs, installation hardware, gasket, and ground screw included.
Check Stock

Triple Album Collection Vol 2

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock

Klein 56206 Conduit Bender with Handle, 1/2'

  • 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
  • Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check Stock

Modway Conduit 7 Piece Rattan Patio Dining Set in Brown and Mocha

  • Refresh your alfresco space with the Conduit 7 Piece Outdoor Patio Dining Set. Bringing transitional style with contemporary modern flair to any outdoor area, Conduit Armchairs feature a powder-coated aluminum frame wrapped in synthetic UV-resistant wicker rattan. Foam padded cushion and waterproof cover offer a comfortable seat while dining or entertaining. The Conduit 70" Dining Table features a tempered glass tabletop provides a smooth, easy-to-clean surface ideal for dining and entertaining.
  • Set Includes: One - Conduit 70" Outdoor Dining Table, Six - Conduit Outdoor Dining Armchair.
  • Overall Product Dimensions: 120"L x 88.5"W x 34.5"HTable Dimensions: 70"L x 38.5"W x 30"HChair Dimensions: 25"L x 24.5"W x 34.5"H.
  • Material: Square aluminium tube:40*40*1.5mm.
Check Stock

ISPINNER 4pcs NPT 1/2\ Nonmetallic Liquid Tight Electrical Conduit Connector Fittings, UL Listed, 94V-1, Pack of 4

  • HIGH QUALITY - These liquid tight conduit connector fittings are made of high quality nylon, resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Flammability rating 94V-1, temperature index 125℃..
  • SIZE & QUANTITY - 4 Pack of NPT 1/2 Inch.
  • EASY TO USE - Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • PACKAGE - Each connector comes standard with a O-ring and locknut..
  • WIDELY APPLICATION - It can be used for machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting and so on..
Check Stock

Klein Tools 51607 Aluminum Conduit Bender Full Assembly, 3/4-Inch EMT, 1/2-Inch Rigid, Wide Foot Pedal, Benchmark Symbols and Angle Setter

  • 3/4-Inch assembled Aluminum Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
Check Stock

Diversitech VTS-12 Solder Type with 3/4\ Outer Diameter (Pack Of 1)

  • The Product Is A Af, S/T, 3/4In Od, Pk Of 1.
  • Highly Durable Product For The Purpose Of Use For Pipe And Conduit, Pipe-Fittings.
Check Stock