Top Aluminum Cutting End Mill
EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving
- Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
- PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
- Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
- The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check StockCNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)
- DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
- Range of processing:Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
- High efficiency:Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
- Perfect cutting:The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
- Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check StockRadius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool
- 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
- Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
- Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
- For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check StockSpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL
- 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
- The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
- For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
- The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check StockGranberg Alaskan Chainsaw Mill MKIV, G778-36 - Best Portable 36 Inch Power Sawmill Attachment Tool Kit - Log Milling Machine - Cordless Wood Cutting Rail - Woodworking Parts Planer Router Equipment
- DIY CUTTING MILL - Enables user to mill lumber where the tree falls. No previous experience required! Does not come with chainsaw. Instruction manual & assembly hardware included. Clamps onto your chainsaw bar, no drilling required..
- UP TO 36" CHAINSAW BAR LENGTH - Up to a 32" cutting width to accurately help mill planks up to 32" wide and 1/2" to 13" deep. Truly straight and even cuts, everytime. 70cc minimum requirement.
- AIRCRAFT ALUMINUM EXTRUSION & ZINC PLATED STEEL - Crafted with high-quality USA made tubular aerospace aluminum extrusion and zinc-plated steel to give it a long lasting life-span. CNC-Machined billet end brackets..
- PROUDLY MADE IN THE USA - All Granberg products are very proudly both made and assembled in America. We are a family-owned and run business that use our own products. We are passionate about what we make. Granberg has all your milling needs..
- SUPPORT AND ADVICE AVAILABLE - Whether you're a professional arbosrist, weekend hobbyist, or new wood worker.
- we have videos available to show you how to use Granberg products. Our support team are experts in their craft and can help you out..
Check StockYG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter
- Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
- Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stockuxcell a11103100ux0074 5/16\ x 5/16\ Straight Shank 4 Flute Endmill Milling Cutter
- Package Content : 1 x Straight Shank End Mill.
Check StockYakamoz 10Pcs 1/8\ Shank Spiral Router Bit Flat End Carbide CNC End Mill Cutter 3 Flutes Milling Bits 2/3\ Cutting Length for MDF Acrylic Wood PVC
- Type: Spiral (Upcut), Cutting Type: 3 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 2/3" (17mm), Overall Length: 1-33/64" (38.5mm).
- High quality carbide end mill provides good milling & cutting performance to ensure high work efficiency and to maximize worker efficiency..
- High efficiency, durable, high precision and not easy to break. The design of flute, larger spiral chip space makes non-stick crumbs, smooth cutting and fast chip-removal..
- Widely use for carving, cutting, engraving, milling, drilling, roughing, sculpturing in materials like MDF, acrylic, aluminum, wood, composite board, plastics, double color plate, ABS, PVC, organic board, solid wood, PVC expansion sheet etc..
- Made of high quality tungsten steel for long service life, precision edge-grinding technology provide excellent cutting results and enhanced productivity..
Check Stockuxcell Milling Cutter 4mm Depth 25mm Cutting Dia 8 Flutes HSS T Slot End Mill
- Package Content : 1 x T Slot End Mill1 x Case.
Check StockYG-1 E5021 Carbide Square Nose End Mill, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter
- Suitable for general-purpose machining on steel, chromium-nickel steel, and cast iron.
- Four flutes produce a better finish than fewer flutes.
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Square nose end mills (also called square end) create sharp, unrounded cuts.
Check Stock5PCS 1/2' Carbide Square End Mill Bits Set, Milling Bits Cutter 1/2 Carbide End Mills for Alloy Steels/Hardened Steels, HRC 45 Deg Single End 4 Flute AlTiN Coating
- Package Included: 5pcs 1/2" carbide square end Mill.
- Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel..
- Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance..
- HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron..
- Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining..
Check StockSpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
- The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
- For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
- The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock