Top Aluminum Die Cast Part

Jada 1:24 Diecast Back to The Future 3 Time Machine with Lights

  • Authentically licensed product from Back To the Future.
  • As seen in Back To the Future Part III,the Time Machine has been taken directly from the big screen and brought to you in a 1:24 scale die - cast model.
  • Crafted from durable materials such as 100% die - cast metal and premium rubber tires..
  • Our high - end casting method allows for feature rich details, such as an opening doors and light up feature..
  • This premium die - cast model is a must have for any Back To the Future collection.
Check Stock

Reed Tool LV9PM Easy Read Pitch Torpedo Level

  • Strong, die cast, one-piece aluminum frame.
  • Magnetic base and working edges precision ground flat.
  • Vial indicates pitch at 1/8-Inch, 1/4-Inch or 3/8-Inch per foot without adjustments.
  • Also, has standard vials for plumb and 45.
Check Stock

LABLT 635-518 Rear Main Seal Kit 4.8 5.3 6.0 6.2 Replacement for Chevy GMC 12633579 12639250

  • Made of die-cast aluminum for a leak-free fit and durability.
  • The part has undergone extensive testing to ensure a quality fit and long service life.
  • The rear main seal cover kit matches the factory design, and includes a new gasket, installation hardware, and an updated seal design for superior leak prevention.
  • The kit includes a new gasket and installation hardware.
Check Stock

Power Acoustik MOFOS-12D2 12" Dual 2 Ω 1200W RMS Subwoofer, Black

  • 2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
  • Non-Pressed Pulp Cone, Polyether Foam Surround. RMS power handling: 1,500, efficiency (1w/1m): 85.40.
  • Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.
Check Stock

Power Acoustik MOFO-154X MOFO 15-Inch Dual 4-Ohm VC 3000 Watt Pro Subwoofer, Standard Packaging

  • 2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
  • Non-Pressed Pulp Cone, Polyether Foam Surround.
  • Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.
Check Stock

Marshalltown Straight Tile Nipper

  • MARSHALLTOWN Straight tile nippers are great for small, curved or irregular nipping of ceramic or porcelain tiles..
  • The adjustment knob controls how far nippers open, with stops for closed, 1/4 Inch tile, 1/2 Inch tile and fully open, to help reduce hand fatigue..
  • All MARSHALLTOWN Tile Nippers and Cutters have pre-set locking capabilities, a durable die-cast aluminum body, replaceable tungsten-carbide tips/wheels, and comfortable DuraSoft handles..
  • The Wheeled Nippers include Replaceable, tungsten-carbide tips and wheels, Internal torsion springs that help prevent damaged or lost springs and an Aluminum die cast body that provides lightweight durability..
Check Stock

Power Acoustik MOFO-124X MOFO 12-Inch Dual 4-Ohm VC 2700 Watt Pro Subwoofer,Black

  • 2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
  • Non-Pressed Pulp Cone, Polyether Foam Surround. RMS power handling: 1,500, efficiency (1w/1m): 85.40.
  • Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.
Check Stock

Rab Lighting HBHH100HQTVG HB HID Flood 100W MH QT HPF with Hood Verde Green

  • Housings: die cast aluminum with powder coat finish.
  • Set screw for hood, grill, or visor attachment.
  • Heavy duty mounting arm with internal O-ring, locking teeth, and stainless steel screw.
  • EZ Grip locknut matches fixture finish and can be adjusted with fingers, pliers or a screwdriver.
  • rugged die cast aluminum ballast housings with powder coat finish.
Check Stock

Dorman 635-518 Engine Rear Main Seal Cover Compatible with Select Models

  • Direct replacement - this rear main seal cover kit matches the factory design, and includes a new gasket, installation hardware, and an updated seal design for superior leak prevention.
  • Durable construction - the timing cover in this kit is made of die-cast aluminum for a leak-free fit and durability.
  • Convenient solution - this kit includes a new gasket and installation hardware for a complete repair.
  • Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

RVINGPRO 50 Amp 125/250 Volt RV/EV Power Outlet Box, Enclosed Lockable Weatherproof Outdoor Electrical NEMA 14-50R Receptacle Panel, Black, ETL Listed

  • Kit includes gasket and mounting hardware, closure plugs and self threading ground screws..
  • Bubble Cover has a Patented Multi-Configuration Design: Gang can be used horizontally or vertically, with up to 18 configurations, wheter GFCI, Duplex, Switch, or Round..
  • Outlet Cover is made of durable polycarbonate construction, lockable and easy to install, and fits full size padlock. Outlet Box is constructed of heavy duty die-cast aluminum with a weatherproof powdercoat finish to protect it from the elements. Keeps rain and dirt from disrupting any electrical circuit..
  • Outlet Box has Three (3) 1/2 Inch Outlet Holes. Heavy duty die-cast aluminum construction with a weatherproof powdercoat finish to protect it from the elements. Keeps rain and dirt from disrupting any electrical circuit.UL Listed. While-in-use bubble cover is UL Extra Duty Compliant (for Wet Locations, National Electrical Code 406.9 (B)(1)). NEC Compliant, UL File No. E362580.
  • Outlet box is 2-Inch Deep. Outlet Cover is 3-1/4" deep.Outlet Box has Three (3) 1/2 Inch Outlet Holes. Heavy duty die-cast aluminum construction with a weatherproof powdercoat finish to protect it from the elements. Keeps rain and dirt from disrupting any electrical circuit..
Check Stock

PROXXON Bench Drill Press TBM 115, 38128 , Green

  • Competent drilling of micro holes down to1/64" (0.5 mm) with extremely high rotational accuracy.
  • High quality machined work table of ribbed die-cast aluminum (work table size 8 1/2" x 4 3/4" (220 x 120mm)).
  • 3 spindle speeds of 1,800, 4,700 and 8,500rpm allowing triple torque at lower speeds.
  • Quill diameter 1 1/4" (32mm) with return spring, throat depth (column to drill spindle) 5 1/2" (140mm).
  • Scope of delivery: 1x PROXXON Bench Drill Press TBM 115 including MICROMOT Steel Collet Set. Part number: 38128.
Check Stock

V-Belt Pulley,1 Groove,8.00\ O.D.

  • V belt drive pulley is a compatible replacement part for Chicago Die Cast 200A.
  • Through Bore : 3/16" , Groove Angle : 34° , Inside Diameter: 3/4" , Outside Diameter : 2" , Width : 5/8".
Check Stock