Top Aluminum Nitride

Charlotte Tilbury Bar of Gold Palette Highlighter Palette

  • Ingredients: Alumina, Mica, Caprylic/Capric Triglyceride, Oryza Sativa (Rice) Extract, Zinc Stearate, Glyceryl Behenate, Silica, Boron Nitride, Lauroyl Lysine, Stearyl Dimethicone, Polymethyl Methacrylate, Sodium Dehydroacetate, Octadecene, Tin Oxide, Phenoxyethanol, Sorbic Acid, Alumi- Num Dimyristate, Triethoxycaprylylsilane, Disodium Stearoyl Glutamate. May Contain: Titanium Dioxide (CI 77891), Aluminum Powder (CI 77000), Iron Oxides (CI 77492, CI 77499, CI 77491), Red 30 Lake (CI 73360), Yellow 5 Lake (CI 19140), Red 7 Lake (CI 15850)..
Check Stock

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Can be used for drilling, slotting, chamfering, and profile milling.
Check Stock

Riedell UPTOWN 120 BR Mens Rhythm Skates 2009 - Size 5

  • TOP QUALITY CRAFTSMANSHIP - These precision bearings come equipped with hardened Swiss chromium steel alloy balls that can endure long-lasting use..
  • OPTIMIZED DURABILITY - The KwiK Swiss Nitride bearings use a Titanium Nitride coating. This coating does not chip, flake, or degrade during prolonged rough use..
  • CORROSION RESISTANT DESIGN - The KwiK bearings' Titanium Nitride-coated races resist corrosion. They also provide strength and smoothness to create a performance with the greatest roll..
  • FRICTION RESISTANT RETAINERS - These bearings come equipped with friction resistant Delrin retainers that are pre-spun with high-performance oil..
  • SLEEK & LUXURIOUS DESIGN - The 8mm skate bearings come with a metallic gold finish, a design that is worthy of its performance. This product is not a children's product and is not designed or intended for use by children 12 years of age or younger..
Check Stock

Melin Tool AMG-DP1 Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 2.5\ Overall Length, 0.375\ Cutting Diameter, 0.375\ Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Can be used for drilling, slotting, chamfering, and profile milling.
Check Stock

Melin Tool - 56245 CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Use for radius and contouring part surfaces.
  • Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous.
Check Stock

Ohamtes 2mm Reduced Shank Twist Drill Bits High Speed Steel HSS 4341 for Iron/Copper/Plastic/Aluminum Plates/Metal Materials, Round Shank, Double Edge, 5 Pcs

  • Parameter: Cutting and Shank Dia : 2mm / 0.08", Cutting Edge Length: 25mm / 0.98", Twist Drill Total Length : 49mm / 1.93"..
  • Short Shank Twist Drill Bit Uses: For Stainless Steel/Aluminum Alloy/Iron/Copper/Plastic/Aluminum Plates/Metal Materials etc..
  • How To Use: When in use, The drill bit should be perpendicular to the workpiece and oil, water, or coolant should be added to keep cool..
  • Features: Premium gold titanium and black nitride dual coating, more heat and wear resistant. HSS straight shank tool strong hardness and toughness..
  • Package Content: 5 x Double Flutes Straight Shank Twist Bit..
Check Stock

Ohamtes 7mm Reduced Shank Twist Drill Bits High Speed Steel HSS 4341 for Iron/Copper/Plastic/Aluminum Plates/Metal Materials, Round Shank, Double Edge, 5 Pcs

  • Parameter: Cutting and Shank Dia : 7mm / 0.28", Cutting Edge Length: 70mm / 2.76", Twist Drill Total Length : 109mm / 4.29"..
  • Short Shank Twist Drill Bit Uses: For Stainless Steel/Aluminum Alloy/Iron/Copper/Plastic/Aluminum Plates/Metal Materials etc..
  • How To Use: When in use, The drill bit should be perpendicular to the workpiece and oil, water, or coolant should be added to keep cool..
  • Features: Premium gold titanium and black nitride dual coating, more heat and wear resistant. HSS straight shank tool strong hardness and toughness..
  • Package Content: 5 x Double Flutes Straight Shank Twist Bit..
Check Stock

Ohamtes 4mm Reduced Shank Twist Drill Bits High Speed Steel HSS 4341 for Iron/Copper/Plastic/Aluminum Plates/Metal Materials, Round Shank, Double Edge, 2 Pcs

  • Parameter: Cutting and Shank Dia : 4mm / 0.16″, Cutting Edge Length: 43mm / 1.69″, Twist Drill Total Length : 75mm / 2.95″..
  • Short Shank Twist Drill Bit Uses: For Stainless Steel/Aluminum Alloy/Iron/Copper/Plastic/Aluminum Plates/Metal Materials etc..
  • How To Use: When in use, The drill bit should be perpendicular to the workpiece and oil, water, or coolant should be added to keep cool..
  • Features: Premium gold titanium and black nitride dual coating, more heat and wear resistant. HSS straight shank tool strong hardness and toughness..
  • Package Content: 2 x Double Flutes Straight Shank Twist Bit..
Check Stock

Ohamtes 5.5mm Reduced Shank Twist Drill Bits High Speed Steel HSS 4341 for Iron/Copper/Plastic/Aluminum Plates/Metal Materials, Round Shank, Double Edge, 2 Pcs

  • Parameter: Cutting and Shank Dia : 5.5mm / 0.22", Cutting Edge Length: 55mm / 2.17", Twist Drill Total Length : 93mm / 3.66"..
  • Short Shank Twist Drill Bit Uses: For Stainless Steel/Aluminum Alloy/Iron/Copper/Plastic/Aluminum Plates/Metal Materials etc..
  • How To Use: When in use, The drill bit should be perpendicular to the workpiece and oil, water, or coolant should be added to keep cool..
  • Features: Premium gold titanium and black nitride dual coating, more heat and wear resistant. HSS straight shank tool strong hardness and toughness..
  • Package Content: 2 x Double Flutes Straight Shank Twist Bit..
Check Stock

Ohamtes 10.5mm Reduced Shank Twist Drill Bits High Speed Steel HSS 4341 for Iron/Copper/Plastic/Aluminum Plates/Metal Materials, Round Shank, Double Edge, 2 Pcs

  • Parameter: Cutting and Shank Dia : 10.5mm / 0.41", Cutting Edge Length: 85mm / 3.35", Twist Drill Total Length : 133mm / 5.24"..
  • Short Shank Twist Drill Bit Uses: For Stainless Steel/Aluminum Alloy/Iron/Copper/Plastic/Aluminum Plates/Metal Materials etc..
  • How To Use: When in use, The drill bit should be perpendicular to the workpiece and oil, water, or coolant should be added to keep cool..
  • Features: Premium gold titanium and black nitride dual coating, more heat and wear resistant. HSS straight shank tool strong hardness and toughness..
  • Package Content: 2 x Double Flutes Straight Shank Twist Bit..
Check Stock

Ohamtes 6.5mm Reduced Shank Twist Drill Bits High Speed Steel HSS 4341 for Iron/Copper/Plastic/Aluminum Plates/Metal Materials, Round Shank, Double Edge, 5 Pcs

  • Parameter: Cutting and Shank Dia : 6.5mm / 0.26″, Cutting Edge Length: 62mm / 2.44″, Twist Drill Total Length : 100mm / 3.94″..
  • Short Shank Twist Drill Bit Uses: For Stainless Steel/Aluminum Alloy/Iron/Copper/Plastic/Aluminum Plates/Metal Materials etc..
  • How To Use: When in use, The drill bit should be perpendicular to the workpiece and oil, water, or coolant should be added to keep cool..
  • Features: Premium gold titanium and black nitride dual coating, more heat and wear resistant. HSS straight shank tool strong hardness and toughness..
  • Package Content: 5 x Double Flutes Straight Shank Twist Bit..
Check Stock

Ohamtes 12.5mm Reduced Shank Twist Drill Bits High Speed Steel HSS 4341 for Iron/Copper/Plastic/Aluminum Plates/Metal Materials, Round Shank, Double Edge, 2 Pcs

  • Parameter: Cutting and Shank Dia : 12.5mm / 0.49″, Cutting Edge Length: 100mm / 3.94″, Twist Drill Total Length : 151mm / 5.94″..
  • Short Shank Twist Drill Bit Uses: For Stainless Steel/Aluminum Alloy/Iron/Copper/Plastic/Aluminum Plates/Metal Materials etc..
  • How To Use: When in use, The drill bit should be perpendicular to the workpiece and oil, water, or coolant should be added to keep cool..
  • Features: Premium gold titanium and black nitride dual coating, more heat and wear resistant. HSS straight shank tool strong hardness and toughness..
  • Package Content: 2 x Double Flutes Straight Shank Twist Bit..
Check Stock