Top Aluminum Plastic Packaging Tube

Telescoping Ladder 12.5ft Thicken Aluminum Extension Ladder Lightweight Collapsible Telescopic Ladder for RV Camping and Home Attic, 330 lbs Capacity

  • THICKED NON-MARKING ALUMINUM TUBE -- The thickness of the aluminum tube of the telescopic ladder is 1.3MM, which is higher than most other ladders on the market and has a longer service life. The the aluminum ladder is adopted non-marking aluminum tube technology, which is integrally formed, which is more resistant to oxidation and corrosion..
  • ALUMINUM TUBE OVERLAP LENTH 17CM/6.7INCH -- The overlap of each section of the aluminum tube of the telescopic ladder is as high as 17cm/INCH, which is 3.5cm more than that of other attic telescopic ladders on the market. The longer the overlap, the less likely it is to break. All plastic parts of the folding ladder are made of high tenacity nylon plastic, which able to withstand low temperature environments..
  • ANTI-SLIP PEDAL & GIFT TOOL WAIST BAG -- The steps of the attic stairs and the bottom of the ladder have been treated with anti-skid treatment, so that you are not easy to slip during the climbing process, and it is safer. There is a tool waist bag for each ladder, when you complete high-altitude operations independently, you can carry some necessary small tools with you, without climbing up and down, saving time and effort..
  • MULTI-LOCK DESIN EXTENDS SERVICE LIFE -- There are tow black locks on the both side....
Check Stock

Heyiarbeit RC Antenna Tube Green with Green Mount and Cap for RC Boat 5pcs

  • 【Parameters】- Tube Inner Diameter: 2mm/0.08".
  • Material: Plastic Tube, Aluminum Alloy Mount.
  • 【Good Material】-The antenna base is made of high-quality aluminum alloy material, waterproof, wear-resistant, corrosion-resistant, sturdy and durable.
  • The antenna tube is made of high-quality plastic, sturdy and durable, and has good flexibility, It protects the fragile receiving antenna and protects the antenna from damage, Won't break in a collision.
  • 【Easy to Use】-This antenna tube is easy to trim and use, you can cut it to fit the size, well-made, durable, very suitable for protecting your antenna.
  • antenna base can be used as a good support for the transmitting antenna, which helps to fix the receiving antenna at a proper angle to obtain the best signal.
  • 【Application】- RC antenna mount is compatible with DIY RC model, such as RC boat, RC vehicles and so on.
  • 【Package Contents】- 5 pcs x RC Antenna Mount +5pcs x Antenna Tube.
Check Stock

8 Pieces Toothpaste Tube Squeezer Dispenser Toothpaste Clips for Bathroom Yellow Gray Blue White

  • Practical tool: this toothpaste tube squeezer is a practical tool for not wasting, you can use it for the kitchen, bathroom or hobby space.
  • Easy to use: the toothpaste squeezer designed with clip shape, just push flattened end of tube into squeeze slot and pull through, no need any more....
  • Multi-function: the plastic tube squeezer works well for aluminum and plastic tubes, fits for squeeze toothpaste, cream tube, cleansing foam or other....
  • Reliable quality: these toothpaste clips are made with quality plastic, durable and safe, won't break easily, can be last for a long time.
  • Quantity: each package comes with 8 pieces toothpaste squeezers in 4 different colors (yellow, gray, blue and white), the colors are sent randomly,....
Check Stock

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

  • ..., Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

Toothpaste Squeezer Metal Toothpaste Tube Squeezer Paint Tube Wringer for Artist Hair Salon Painter…

  • Heavy Duty: Made of aluminum alloy, durable and never rust toothpaste squeezer..
  • Termination of Waste：Tube squeezer helps you get every last bit from all metal and plastic tubes..
  • Easy to Use: Gear bite tightly. No slipping paint tube wringer! Squeeze cream clean and free of residues..
  • Ergonomically Designed: this metal toothpaste tube squeezer is comfortable and easy to operate..
  • Multi-function: Tube wringer fit plastic tubes, metal tubes, like hair color, oil paint, cosmetics, hair gel, craft glue, ointments, tomato paste, toothpaste and so on..
Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • ..., Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

PASS N PUFF | The Football You can Smoke | Purple and Gold Football

  • Ball - Injection Molded Medical Grade Plastic.
  • Dimensions - 4.8 Inches Diameter / 9.3 Inches Length.
  • Parts Included - Cap, Tube (smoke holder), Ball.
Check Stock

Joywayus 3/8\ Tube OD Brass Ferrule Fittings Compression Sleeves Brass Compression Fitting(Pack of 50)

  • Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

ProBalkn Deburring Tool with 6 HSS Blades for Steel, Cooper, Brass, PVC, Resin and Mini Tube Cutter with 1 Extra Blade for 1/8' - 1-1/8' Stainless Steel, Cooper, Aluminum, Brass, Plastic Pipes

  • Package Content: 1 x tube cutter (2.87x1.97x0.98 inches) with 1 x extra blade.
  • 1 x deburring tool (4.9 x 0.87 inches) with 6 x different blades for metal, plastic, and brass.
  • All-Purpose Deburring Tool: Ranging from DIY projects, home use, to professional industrial and plumbing applications, this deburring tool removes fast and easy burrs from the straight edge, curved edge, and holes.
  • with the storage handle design, spare blades are easily kept in and could be reached at any time.
  • Various Blades: Included 6 HSS sharp steel blades allow a precise and smooth hand deburring of all sorts of edges.
  • 2 x BK3010 blade with 45° angle for plastic.
  • 2 x BS1010 blade with 40° angle for the brass and copper.
  • 2 x BS1018 blade with 45° angle for steel.
  • Mini Tube Cutter: Our pipe cutter is designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass, and plastic tubing, ensuring easy control of cutting pressure for clean cuts.
  • the cutting capacity is from 1/8" to 1-1/8" (3-28mm).
  • Sturdy Aluminum Cast Frame: The tube Cutter body is made of lightweight and durable aluminum casting.
  • the blade is built using CNC machining with special durable and high-quality alloy steel.
Check Stock

8 Pieces Toothpaste Tube Squeezer Dispenser Toothpaste Rollers Clips for Bathroom (Beige, Gray, Black, Rose Red, Green, Yellow, White, Blue)

  • Practical tool: this toothpaste tube squeezer is a practical tool for not wasting, you can use it for the kitchen, bathroom or hobby space.
  • Easy to use: the toothpaste squeezer designed with clip shape, just push flattened end of tube into squeeze slot and pull through, no need any more strength, convenient and easy to squeeze cream clean.
  • Multi-function: the plastic tube squeezer works well for aluminum and plastic tubes, fits for squeeze toothpaste, cream tube, cleansing foam or other items.
  • Reliable quality: these toothpaste clips are made of quality plastic, wearable and safe, won't break easily, can be last for a long time.
  • Quantity: each package comes with 8 pieces toothpaste squeezers in 4 different colors, including yellow, gray, blue and white, each color 2 pieces, enough for use.
Check Stock

Libraton Tube Cutter, Mini Tubing Cutter, Heavy-duty Pipe Cutter with Deburring Tool for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube..
  • [Mini Cutter] The mini tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • [Copper Tube Cutter] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
Check Stock