Top Aluminum Profile Pipe

60mm Preheater Hose Air Inlet Pipe,Air Duct Drain Hose Car Heater Duct Vent Warm Air Outlet for 2000/6000 W Air Heaters, Aluminum Foil Heater Duct Pipe Car Air Ducting Hose/1pc

  • 【Aluminum Foil Heater Duct】- Made of high quality aluminum foil material, durable and practical to use. Anti-shock, corrosion, flame resistant, Car Heater Pipe Auto Aluminum Foil Flexible Air Ducting..
  • 【Hot & Cold Air Ducting Hose, Car Warm Heater Duct Pipe Air Ducting Replacement】- Hot & cold air ducting,for Domestic, for Planer etc. Perfect to replacement the old or broken Heater Duct. Vent Warm Air Outlet Aluminum Foil Replacement Hose Extendable Pipe..
  • 【Retractable Car Air Heater Duct Pipe】- Extendable 60, 75 mm diameter air inlet pipe can be extendable up to 800 mm.42mm extendable:42 mm diameter air inlet pipe can be extendable up to 1000 mm..
  • 【Three diameters】-Three diameters, suitable for most outlet hose to meet your needs..
  • 【Occasions】- Mainly used for 2000 W or 6000 W air heaters.Hot and cold, air ducting for heater, etc..
Check Stock

FILOL 2PCS Blue Aluminum Alloy Universal Car Turbo Whistle, Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail (L)

  • ✿After installed this product, the pressure blowing out of your exhaust will make your vehicle sounds like a turbo vehicle with the turbo system or blow off valve..
  • ✿Size Exhaust volume Exhaust Pipe Diameter S:10.26x5.25cm, M:10.3x5.9cm,L:11.6x6.3cm,XL:12x6.9cm.
  • ✿Made of durable material,anti-corrosion and wear resistance.Light weight.Easy to install on the car’s tailpipe..
  • ✿Beautiful appearance, very fashionable,it is the first choice for decorative car.Perfect match and make your car fashionable and unique..
  • ✿KEY: Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large Aluminum Alloy Universal Car Turbo Whistle Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large.
Check Stock

Bravex Tube Cutter 1/4\ to 2\

  • [High-quality Blade] This pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes)..
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [100% Money-Back Guarantee] If you're not satisfied, return back to us, no-hassle refund or product replacement..
Check Stock

RIDGID 47057 Model 812 Aluminum Straight Pipe Wrench, 12-inch Plumbing Wrench , Small , Silver

  • Professional strength, lightweight aluminum wrench is nearly 40% lighter than a same-size RIDGID heavy-duty model with the same durability and ease of use.
  • I-beam handle with full floating forged hook jaw for superior gripping and quick adjustments.
  • Features self-cleaning threads with easily replaceable hook jaw, heel jaw, and spring assembly.
  • Aluminum pipe wrench includes special hook and heel jaws for plastic coated pipe.
  • 12-inch (300 mm) pipe wrenches are ideal for pipe diameters of 1/2 inch (13 mm) to 1-1/2 inch (40 mm) with a pipe capacity of up to 2 inches (50 mm).
Check Stock

MAXPOWER 14-Inch Pipe Wrench, 40% Lighter Aluminum Plumbing Wrench, Heavy Duty Straight Pipe Wrenches Jaw Max Capacity 2 inch

  • 14-inch Aluminum straight pipe wrench, clamping capacity Up to 2 inch, Overall length 350mm.
  • Nearly 40% lighter than traditional iron pipe wrench of same size, this aluminum pipe wrench offers a great durability, and lightweight for easy transport.
  • This plumber pipe wrench is suitable for tightening and loosening threaded pipes of all forms, easy for use in residential plumbing works and repair.
  • Straight pipe wrench has serrated jaw and adjustable nut, covered self-cleaning threads, replaceable hook jaw and spring assembly, Do Not recommend to use this wrench as hammer.
  • I-beam handle for powerfully gripping and quick adjustments.
  • MAXPOWER pipe wrench, maximum torque exceeds ANSI standards.
Check Stock

NDS 640 Square Grate with Low-Profile Adapter Fits 3 in. & 4 in. Drain Pipes & Fittings, 6 in, Black Plastic

  • Protect your drainage system by using a grate and low-profile adapter on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining moderate water flows from lawns, landscaped areas, patios, walkways, and under downspouts.
  • Fits 3 in. & 4 in. Sewer and Drain Pipes & Fittings, 3 in. & 4 in. Single-Wall Corrugated Pipes, 3 in. & 4 in. Triple-Wall Pipes. 44 GPM flow rate. 14.4 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place low-profile adapter on top of drain pipe or drain fitting, for a soil-tight fit.
  • place 6 in. drain grate on top of low-profile adapter. 6 in. Square Drain Grates (with Low-Profile Adapters) are available in a variety of colors and materials.
  • Grate top is 5-7/8 in. square with ¼ in. grate openings.
  • Low-profile adapter is 2-1/2 in. high, top opening is 6-3/16 in. square.
  • Comes with one 6 in. Square Grate and Low-Profile Adapter. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
  • NDS grates are a proven alternative to traditional concrete d....
Check Stock

Imachinist S6412121418 Bi-Metal Band Saw Blades 64-1/2\ X 1/2\ X 14/18tpi for Cutting Soft Ferrous Metal Variable Teeth

  • Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14/18tpi.
  • Perfect for cutting soft ferrous metal only.
  • 14/18tpi is suitable for cutting thin pipe tube profiles etc, do not cut any non-ferrous metal like aluminum etc..
  • Suits all bandsaws which use 64-1/2" long, 1/2" wide bandsaw blade.
Check Stock

AMERIMAX HOME PRODUCTS 2526519 2 in x 3 in B or Side Elbow Brown Aluminum, Two-by-Three

  • Connects 3 in. S&D pipe to 3 in. S&D pipe, & to NDS parts that fit 3 in. S&D connections such as Spee-D, 3, 5, & 8 in. Pro Series Channel Drain Outlets, 6 in. Low-Profile Adapters, 4 & 6 in. Square Grates, 3 & 4 in. Round & Atrium Grates, Pop-Up Emitters.
  • Adds a 90° turn from 3 in. Sewer & Drain (S&D) pipe to 3 in. S&D pipe in non-pressurized drainage and sewer piping systems.
  • Adds a 90° turn from select drainage products such as channel drain outlets, drainage grates, and pop-up emitters to 3 in. S&D pipe.
  • Attach 3 in. S&D pipe to one end of 90° elbow and 3 in. S&D pipe to the other end.
  • also connects 3 in. S&D pipe to select drainage products that accommodate 3 in. S&D connections.
  • solvent weld to PVC components for a watertight connection.
  • Comes with one PVC Elbow. Meets applicable ASTM standards..
Check Stock

Bravex Tubing Bender Pipe Tube Bender Kit Refrigeration Ratcheting Hand Tool 1/4 to 7/8 Inch with Tube Cutter/Deburring HVAC Tool Refrigeration System Maintenance

  • Suitable Tube Sizes: 1/4“, 5/16“, 3/8“, 1/2”, 5/8“, 3/4“, 7/8”, the maximum bending angle is 90 degrees, supports reverse bend. Bends pipes in both “forward” and “reverse” configurations..
  • The pipe bender is made of 40Cr steel & 45# steel with high precision machining. The aluminum alloy tube bender heads (replaceable) are firm and durable, preventing pipe deformation. The super long handle increases the leverage, making this tool both convenient and labor-saving..
  • Comes with pipe cutter, suitable for cutting heavy and hard materials, such as thin stainless steel (thickness.
  • Also includes a deburring tool made of solid plastic structure and high-speed steel bald head. It can quickly, cleanly and easily enlarge the inner diameter of different pipes (such as copper, aluminum, PVC and stainless steel pipes)..
  • If the pipe crack when bent,try heating and cooling to soften the pipe,and it will make perfect bends. Applications：automobile maintenance, refrigerator maintenance, Hvac work, hydraulic systems, etc..
Check Stock

Imachinist S80121418 80\ x 1/2\ x 14/18TPI Variable Teeth Bi-Metal Band Saw Blades for Soft Ferrous Metal

  • Bi-metal type, HSS M42 grade, 80" long, 1/2" wide, 0.025" thick, 14/18TPI.
  • 14/18TPI is suitable for cutting thin pipe tube profiles etc, do not cut any non-ferrous metal like aluminum etc..
  • 14/18TPI is variable teeth profile, big teeth distance is 1.8mm per teeth, small teeth distance is 1.4mm per teeth.
  • Suits all bandsaws which use 80" long, 1/2" wide bandsaw blade.
Check Stock

KARRYTON 48 Inch Aluminum Pipe Wrench, 8\/200mm Adjustable Jaw Capacity, Heavy Duty Straight Handle Plumbing Wrenches Plumbers Tool, Exceed the Standard GGG (48-INCH)

  • [8-INCH JAW OPENING] KARRYTON 48 Inch Aluminum pipe wrench is perfect for pipe diameters of 2" to 6" with a jaw opening capacity of up to 8-inch/200 mm. Straight handle made of Aluminum Alloy and jaw made of Chromium-Molybdenum (Cr-Mo) Steel, WILL NOT break or Warp..
  • [ALUMINUM I-BEAM HANDLE] KARRYTON pipe wrench’s aluminum handle 40% lighter than cast iron wrenches. Grey anti-rust and anti-oxidation spray coating on the surface. The long I-beam handle which is comfortable to hold with wear-resistant and non-slip quality. A pair of industrial-grade Nitrile palmed gloves included for safe operation..
  • [Cr-Mo JAW & ADJUSTABLE NUT] The entire wrench head is drop forged from Chromium Molybdenum Carbon steel. The hardness of the teeth is extremely high after quenching, making sure to always bite on the pipes. The non-slip nut runs smoothly for quick adjustment of various pipe sizes..
  • [V-SHAPED DESIGN JAW] V-shaped opening of jaw design makes it easier to clamp onto the objects (including pipes, bolts, hex nuts). Thirty-degree wave designed teeth provide most safety and gripping power without being slippery..
  • [WIDELY APPLICATIONS] KARRYTON’s heavy-duty 48" Aluminum pipe wrench is suitable for most kinds of pipes, nuts and bolts, and, is versatile for in....
Check Stock

Oiled Cold Air Intake 7.3 Diesel Kit Air Intake Pipe With Oiled Filter Replacement For Ford F250 F350 F450 Super Duty 7.3L Powerstroke Diesel (1999.5-2000 2001 2002 2003)

  • Fits For 1999.5-2003 Ford F250 F350 F450 Super Duty 7.3L Powerstroke Diesel (2000 2001 2002 2003).
  • All the bends in our aluminum tubes are CNC mandrel bent and engineered for maximum air flow. Air intake pipe is polished and power coated black.
  • Premium Aluminum :This Cold Air Intake Pipe w/ Air Filter made of excellent aluminum alloy material, durable in use with high temperature resistant and corrosion..
  • Aluminum Construction won't crack like plastic and can holds up to the wide temperature extremes common in every engine compartment.
  • Package included: 1 Air Intake Pipe+1 Oiled Filter+1 Silicone Pipe+1 Mounting Bracket+4 Screws+3 O-shape washers, without instruction..
Check Stock