Top Aluminum T8 Fluorescent Lamp

20-Pack JACKYLED Screw Type T8 Lamp Holder with Wires UL Non-shunted Tombstone Light Socket for LED Fluorescent Tube Replacements

  • Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
  • Max Voltage: 608V. Great for retrofitting your fluorescent....
  • UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 108% safe from fire hazard, durable even after years of....
  • Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 25 AWG Wire. Just connect the wires, plug the....
  • Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between....
  • 108% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience.....
Check Stock

12-Pack JACKYLED Non-Shunted Turn-Type T8 Lamp Holder UL Socket Tombstone with 10 inches Wires Attached for LED Fluorescent Tube Replacements

  • Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
  • Max Voltage: 601V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
  • UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 101% safe from fire hazard, durable even after years of use..
  • Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires, plug the tube in and twist, a plug-and-play solution for your lighting projects..
  • Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T9 lights..
  • 100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..
Check Stock

Sylvania 15W 18 T8 Linear Fluorescent Lamp 4200K Cool White 1 Pack

  • Includes one 15W 18" T8 linear fluorescent lamp..Voltage : 86 Volts.
Check Stock

Suzo Happ Fluorescent Arcade Game Light Fixture - 18"

  • This popular lamp fixture easily mounts anywhere.
  • Pre-wired with everything needed to illuminate an area.
  • Includes electronic ballast, sockets and F15T8/CW fluorescent lamp.
Check Stock

Aqueon 2 Pack of Full-Spectrum Daylight T8 Fluorescent Lamp 17-Watt, 24-Inch

  • (2 Pack) Aqueon Full-Spectrum Daylight T8 Fluorescent Lamp 17-Watt, 24-Inch.
Check Stock

EFAYCRR (6 Pairs) Tombstone Base Holder Socket Connector with T8 T10 T12 Single Pin FA8 8ft LED Bulb Light Replacement Fluorescent Plunger Lampholder

  • 【UL Standard】Single Pin T8 lamp holders are UL listed.Made of Flameresistant material..
  • 【Widely used 】FA8 tombstones fit for all kind of T8 T10 T12 single pin fluorescent and LED tube lamp, advertising light box and more.Perfect for lighting up your home or office, basement, closet, studio, etc. Hold the lamp tightly..
  • 【Electronic Parameter】Max Current 6A, Max wattage 660w,Voltage: 100-600V..
  • 【Easy to install】Snap-in or Slide-on Installation, Can Directly Connect with The FA8 Single Pin Light Tube..
  • 【Package included】6 Pairs Single Pin FA8 Sockets for 10 tubes (without cable).
Check Stock

Four-Bros Lighting LED High Bay Light 6 Lamp 5000K Daylight White, 5 Year Warranty, Industrial Grade, Warehouse, Shop, Garage Lighting - UL Listed, DLC Approved, Made in USA, BAA Certified, Pack of 6

  • #1 Rated Made in USA LED High Bay. BAA Certified Fixture.
  • ✔ Single-sided 18-watt LED T8 tubes included with every LED High Bay purchase✔ MAINTENANCE-FREE - No ballast-drama anymore. This 6 Lamp LED high bay light fixtures operates (6) LED T8 tube lights that bypass the ballast. Simply install the LED tube in its marked location and twist. Our LED high bays must be wired to operate 6 LED T8 Tubes.
  • ✔ MAINTENANCE-FREE - No ballast-drama anymore. This 6 Lamp LED high bay light fixtures operates (6) LED T8 tube lights that bypass the ballast. Simply install the LED tube in its marked location and twist. Our LED high bays are rewired to operate 6 LED T8 Tubes17,160 Lumens (Brighter than Fluorescent T5HO) 5000K Daylight White Color Temp.
  • ✔ HOW DOES IT WORK - Each high bay Fixture comes with all the wiring and tombstones needed to be installed on the field. THESE DO NOT COME PREWIRED..
  • ✔ 5 YEAR WARRANTY - Buy with confidence, risk-free. Four Bros Lighting five-year warranty got you covered! Contact us for an easy and fast replacement..
Check Stock

NYLL - 18 Inch/ 18' Plug & Play LED Tube – Daylight (6000K) T8 LED Lamp Directly Relamp & Replace 15W Fluorescent Bulbs F15T12, F15T8, FO13/865 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace the 15 watt fluorescent bulbs F15T12, F15T8, FO13/700, FO13/800 without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T8/ T10/ T12 applications as they all use Medium Bi-Pin base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 40% from 15 watts to 9 watts with 990 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

(Pack of 25) CNSUNWAY 4FT LED Light Bulbs, 22W 2400LM 6000K Super Bright White, Type-B Remove Ballast, Double-Ended Power, Frosted Cover, T8 T10 T12 Flourescent Light Bulbs Replacement

  • ✔EASY REMOVE BALLAST INSTALLATION – CNSUNWAY T8 4 foot led bulbs are easily fitted to replace traditional T8 T10 T12 fluorescent bulbs. Please must remove the starter and ballast before installation.Failure to do so will cause irreparable damage to the led tube! Product must be installed by licensed electrician or technician with electrical safety knowledge..
  • ✔ENERGY SAVING – CNSUNWAY 4ft led light tube has 2400+ lumens high output with only 22 watts power consumption.Comapared with fluorescent tube,it could save up to 65% on your electricity Bill!.
  • ✔FLUORESCENT LIGHT BULB REPLACEMENT – CNSUNWAY T8 4ft LED light tube is ideal replacement for T8 T10 T12 led fluorescent light bulb. It’s compatible with existing T8, T10, and T12 fluorescent fixture, making LED conversion easier than ever..
  • ✔HIGH QUALITY LIGHT TUBE- CNSUNWAY shatterproof 4ft T8 LED tube adopts high quality LED chips, offers sustained high brightness with a long lifespan, no flicker, no noise, non-polluting..
  • ✔HASSLE FREE WARRANTY – CNSUNWAY LIGHTING offers 24/7 after sale service and 2-year unlimited warranty! If you have any question, pls feel free to contact with us for a quick solution..
Check Stock

Lithonia Lighting 3348 Lighting Two-Light Fluorescent Ceiling Fixture White,4-feet

  • 4', 2 lamp, T8 utility wrap fixture, 120V residential electronic Ballast, white steel housing, clear Acrylic lens, energy star rated, title 24....
  • Diffuser features a continuous-interlocking design for easy installation, lamp access and cleaning.
  • Lithonia Lighting 2-light fluorescent white ceiling fixture.
Check Stock

SinLoon UL-LP Certification T5 T8 LED Lamp Connecting Wire Ceiling Lights Daylight LED Integrated Tube Cable Linkable Cords for LED Tube Lamp Holder Socket Fittings with Cables(6.5FT/2M,2-Pack)

  • Item name: UL certified power cord T5 /T8 Double Connector. Length: 200Cm（6.5 foot）. Specification: 3 * 0.824㎡ copper wire. Working voltage range: 110V-250V. Max Output: 6A. Materials: PVC insulation. The long-term service temperature is 80℃~105℃..
  • UL Certified power cord A perfect solution for connecting led strip with controller or strip to strip connection..
  • UL Listed extension cord the products are through 100% aging test and strict quality control.No need welding,no need soldering,easy use..
  • UL-LP Certification T5 T8 LED lamp connecting wire used for fluorescent lamps, LED lamps, advertising light box (shop illuminated signs) halogen, filament or CFL light bulb and more..
  • Package: 2 pcs T5 T8 LED lamp connecting wire+4pcs Clips（Note: Not suitable NVC lighting and sanxiong pak lighting !）.
Check Stock

2FT LED Tube Lights, 24' 8W(25W Fluorescent Bulb Replacement) LED Tube Light Fixture, Two Pin G13 Base, 6000K, Works Without Ballast, Dual-Ended Powered, Frosted Cover, Pack of 4

  • ✔Pack of 4, 8W G13 LED Tube Light Bulbs, Great replacement of F18T8 F20T10 F20T12/CW Fluoresent Lights, 1120LM, 6000Kelvin, Dual End Powered, LED Tube lights 2FT come on quickly and reliably, bulbs are perfect for place where you need lots of light, such as workshop basement garage barn.
  • ✔ENERGY SAVING: Save 52% on your electricity bill! Replace 20W fluorescent tubes by 8W 2FT LED Tube Light . Reduce re-lamp frequency with a lifetime of 50,000+ rated hours (17 years with 8 hours/day 365 days).
  • ✔EASY INSTALLATION: Existing ballast needs to be removed or by-passed. International standard shape for T8 LED Tube light 2FT. easily fitted Instead of traditional fluorescent tube lamps..
  • ✔SAFETY: Like all other LED tubes on market, our T8 led tube lights 2FT take the less fragile plastic covers, so the special flame retardant material on the double ends is very important for avoiding the risk of fire disaster, which may caused by unexpected short circuit etc..
  • ✔ QUALITY ASSURANCE - 3-year unlimited warranty, easy and fast replacement is offered if any quality issue.
Check Stock