Top Aluminum Thread Repair Sleeve

Zerone Spark Plug Thread Repair Kit, 16Pcs 14mm x 1.25 Spark Plug Thread Repair Tool Kit Tap W Portable Case

  • Package Contents: This set of spark plug thread repair tools includes 16 very useful and high-quality plug thread repair tools. The lengths are 11.2mm (black polished), 17.5mm (black polished), 17.5mm (yellow zinc plating).
  • Specifications: With the tap M16 x 1.25 x 70 mm length you can enlarge the spark hole to fit the sleeve..
  • Suitable For: These tap tools are suitable for repairing spark plug thread 14mm x 1.25mm.
  • High-quality Hardened Steel: The thread repair tool kit made of hardened steel, these accessories are of strong strength and long durability..
  • With Tool Box: All the tools are well organized in a blow molded case to protect the components and easy to carry and collect..
Check Stock

OEMTOOLS 25649 14mm Cylinder Head Rethreaded Kit | Mechanic’s Tool for Rethreading Cylinder Heads | Includes Combination Tap/Reamer & 3/8 7/16 1/2 & 3/4 Inserts | Rethread Aluminum Heads Only

  • EASY REPAIR: Next time you have to repair a spark plug, just reach for this easy thread repair tool kit. You won’t need anything else for your repair, and anyone can use it. Keep in mind, this product is meant only for use with aluminum heads.
  • QUALITY MATERIALS: Our spark plug thread repair kit is built to last with its steel parts.
  • VARIOUS INSERTS: This kit comes with everything you need to repair spark plugs in your machine. The sizes include the following: 3/8”, 7/16”, 1/2”, and 3/4” inserts, as well as a combination tap/reamer.
  • BACKING: Our OEMTOOLS 14mm Cylinder Head Rethreaded Kit is backed up with our OEMTOOMS Limited One Year , so if anything happens to your product, you don’t have to worry about it.
  • EASY TO STORE: This thread repair kit is the perfect size to store in one of your shop drawers, or it could even go in a drawer in your own home.
Check Stock

E-Z LOK EZ-329-6 Thread Repair Kit for Metal Carbon Steel Threaded Inserts 3/8-16 and Installation Tools

  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair tool kit..
  • CARBON STEEL INSERTS – Kit includes standard carbon steel threaded inserts that are easy to install with standard tools..
  • FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • KIT INCLUDES – Convenient kit includes threaded inserts for metal, drill, tap, and threaded insert installation drive tool..
Check Stock

Hourleey Garden Hose Repair Fittings, Zinc and Aluminum Male and Female Hose End Water Hose Repair Connector, 4 Pack

  • Package include: 2 pack female thread end hose repair connector with zinc clamp, 2 pack male thread end hose repair connector with zinc clamp.
  • Material: female and male hose repair connectors are made of high quality aluminum, the clamps are made of zinc, the screws are made of stainless steel.
  • Easy to use: easy to connect and disconnect, Hourleey repair connector can be use to repair and connect the water hose end..
  • Widely use: Fit for 3/4" or 5/8 hose fittings, the screws will not strip when tightened..
  • Good Service: If any problem, please feel free to contact us, Prince Team offer replacement and full refund services..
Check Stock

Garden Hose Connector Kit Water Hose Repair Fittings Aluminum Male Female Hose Repair Mender End for 3/4 Inch or 5/8 Inch Garden Hose Connector Replacement (Green)

  • ...get: comes with 2 pieces water hose mender ends altogether, 1 piece male hose repair mender and 1 piece female, and they are suitable for 3/4 inch or 5/8 inch garden hose, the well-matched combination provides service for your garden work.
  • Sturdy and durable material: the male female hose mender end is made of metal aluminum material, which is sturdy and durable to use, not easy to rust or break, and able to endure long time applying for your garden work, so you don't need to worry about the material of our product.
  • Easy to install: the aluminum male and female hose repair mender is easy to install, you can install the garden hose repair fitting with the 3/4 inch or 5/8 inch garden hose easily by your own hand, and it is not easy to cause leakage, can help you to prevent water waste.
  • Convenient thread design: our garden hose repair fittings are equipped with thread design, thus these female garden hose mender can be tightly connected to the garden hose, and you don't need any complicated tools, such thread design saves your time and effort.
  • Multiple applications: these garden hose connectors can be applied for different applications, such as your faucet, hose connector, hose nozzle, sprayer or other matched garden hose fittings, which brings a convenient....
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.....
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

Big-Sert 5382 3/8-24 Oversized Inch Thread Repair Kit

  • 3/8-16 Starter bolt thread repair kit cast iron blocks or aluminum blocks P/n 1535 TIME-SERT.
  • TIME-SERT P/n 1535 Kit includes all the tools and 4 special inserts with straight section for bolt alignment built into the insert..
  • The stripped Starter bolt thread depth of the hole should be 1.200" inches or 30mm Depth minimum..
  • Note: This kit can also repair a failed coil style insert. The failed hole should not be larger than the drill included in kit which is .484 inches..
Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.....
Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.....
Check Stock

uxcell 5/8-18 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.....
Check Stock

uxcell 3/8-16 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.....
Check Stock