Top Aluminum Window Pneumatic Cutting

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

  • Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
  • Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
  • Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
  • Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
  • left-turn-L and right-turn-R are optional..
  • Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Check Stock

DITKOK Galvanized Steel Window Dryer Vent for 4" Dryer Vent Hose, Fit 26" - 36" Vertical Sliding Window Adjustable

  • The 4 inch adjustable air intake window vent by DITKOK was designed to provide the perfect solution for those that need to vent out of a window..
  • The window dryer vent is made with 24 gauge galvanized steel and has an aluminum back draft damper to prevent drafting from outdoors,and also prevent birds from nesting in the vent..
  • Simply place the vent in the open window, slide the side panels to fit the window opening (26" - 36" windows), and close the window. We designed this vent with an enlarged shroud to minimize airflow resistance. Don't worry the standard low profile dryer vent cover adds considerable resistance to airflow..
  • This window vent isn't just for the dryers, it can be used in paint booths, laser engravers, exhaust fan blowers, and just about any other device with a 4" circular exhaust..
  • We provide one year warranty. Note: The scratches on the surface are caused by the laser cutting machine during the cutting process, which is unavoidable, please understand..
Check Stock

Bestgle 4Pcs 6mm(1/4”) Shank Tungsten Carbide Rotary Cutting Burr Die Grinder Bit for DIY Woodworking, Metal Carving, Polishing, Engraving, Drilling, 150-160mm Length

  • Set of 4 Double Cut Solid Carbide Rotary Burr Set, Shank diameter: 6 mm(approach 1/4 inch), Cutting edge diameter: 7mm-10mm, Total length: 150-160 mm.
  • The service life of tungsten steel rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.
  • High performance on processing Copper, Aluminum, Alloy, Iron, Marble, Jade, Steel, Glass, Wood and Plaster etc. machining hardness can reach to HRC70.
  • Generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
  • Excellent for fine detail work,widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding,ect.
Check Stock

TOPOWN Galvanized Steel Window Dryer Vent for 4" Dryer Vent Hose, Fit 16" - 25" Horizontal/Vertical Sliding Window Adjustable

  • The 4 inch adjustable air intake window vent by TOPOWN was designed to provide the perfect solution for those that need to vent out of a window..
  • The window dryer vent is made with 24 gauge galvanized steel and has an aluminum back draft damper to prevent drafting from outdoors,and also prevent birds from nesting in the vent..
  • Simply place the vent in the open window, slide the side panels to fit the window opening (16" - 25" windows), and close the window. We designed this vent with an enlarged shroud to minimize airflow resistance. Don't worry the standard low profile dryer vent cover adds considerable resistance to airflow..
  • This window vent isn't just for the dryers, it can be used in paint booths, laser engravers, exhaust fan blowers, and just about any other device with a 4" circular exhaust..
  • We provide one year warranty. Note: The scratches on the surface are caused by the laser cutting machine during the cutting process, which is unavoidable, please understand..
Check Stock

YANTU Window Breaker & Seatbelt Cutter Car Glass Breaker Double-Sided Tungsten Steel Hammerheads 2 in 1 Life-Saving Car Safety Hammer Necessary Automotive Tool for Emergency

  • 2 IN 1 CAR ESCAPE TOOL - With Aluminum alloy hammer body and Antiskid handle, this window hammer gives you a comfortable feel of touching. Pefect....
  • DOUBLE-SIDED TIP HAMMER HEADS - Different from the "Tip + Flat" car safety hammer, YANTU thoughtfully choose the double-sided hammer heads, each tip....
  • SHARP CAR SEATBELT CUTTER - Seatbelt gets jammed? You can trust this window breaker because it has the embedded cutter for cutting off the stucked....
  • EFFICIENT WINDOW BREAKER FOR CAR - With professional cutting-edge heat treatment and high-quality high-carbon steel material, our car safety hammer is....
  • TIP FOR WINDOW BREAKER - Car window glass is made of high solidity tempered glass which is hard to break. However, the edge of the window glass is....
Check Stock

3-inch air cut-off tool, 3" high-speed air cutter, include 1Pcs 3'' Cut-off Wheels, 180-degree guard, pneumatic cutter by PROSHI

  • High-speed rotation, 3" (75mm) heavy-duty air cut off tool is widely used in a variety of applications, great for cutting steel rods, metal plate, fiberglass, composite materials, angle iron.
  • Maximum rotary speed up to 18,000rpm, the high-speed pneumatic cutoff tool will help you get stuff done faster and easier.
  • The multiple airflow adjustments make control easy – all you need is a quick turn of a screwdriver.
  • Average air consumption of 4.0 CFM @ 90 PSI. Max PSI of 90. Air inlet size of 1/4", use 3" (75mm) 3" cutting disc.
  • Die-cast aluminum body, air cutting tool is wear-resistant and anti-oxidative, fine workmanship keeps long service life.
Check Stock

Make-2-Fit PL 7812 Window Screen Frame Kit – 5/16” x 3/4” x 36” - Replace Missing or Damaged Window Screen  Frames - Construct 36” x 36” or Smaller Screen – Includes Aluminum Frame and Vinyl Spline With Plastic Corners – White (1 Kit)

  • REPLACE WINDOW SCREEN FRAMES – Easily replace missing or damaged window screen frames with this easy-to-use screen construction kit. This kit includes materials to create one 36” x 36” aluminum frame, or smaller custom sizes..
  • YOUR CHOICE OF SCREEN – With the provided materials in the window frame construction kit, screens can be made with your choice of aluminum mesh, fiberglass fabric, or flexible poly film (screen fabric not included)..
  • INCLUDES – This window screen frame kit includes roll-formed aluminum frame material to make a 36” x 36” or smaller window screen frames, 4 “square-cut” plastic corners and vinyl spline. Frame material and plastic corners are white..
  • EASY INSTALLATION – All but the screen fabric is included with this kit  to make a brand-new window screen frame, you can easily replace one that is missing or damaged. Easy-to-follow instructions are provided, and the frame materials are simple to cut and assemble..
  • INSTALLATION TIP – Drag your hacksaw (not included) across an old bar of soap to make cutting the aluminum to-size even easier..
  • For all dimensional information please refer to the line art and compare to your needs before purchasing.
Check Stock

DOTOOL 23 Gauge Pneumatic Pin Nailer 100-Fastener Air-powered Nail Gun and Safety Glasses for Carpentry, DIY Projects, Uphostery and Woodworking

  • 【Packaging Includes】Pneumatic nail gun package contains : Pneumatic Pin Nailer+2 x Hex Wrenches M4 (3mm) and M5 (4mm) +Lubricant +User Manual (Air compressors not included)..
  • 【Professional Nail Gun】This 23 GA depth adjustment nail gun features a durable aluminum body and an ergonomically designed comfortable grip. Work in the pressure range of 60 to 100 psi with the usual 1/4 inch NPT（air compressors are not included)..
  • 【Easy to Operate】Durable lightweight aluminum design and the magazine can hold up 100 nails. Pin nail length: 15/32"~1". We are committed to delivering superior value, first-class customer service and consistently high quality products..
  • 【Rugged & Reliable】The pneumatic nail gun has a durable and lightweight aluminum construction designed to withstand harsh operating conditions. Contact safety features require contact with the nail face before firing to prevent fire..
  • 【Depth Adjustable】Pneumatic brad nailer allows the user to pinpoint the depth of the nail. Correct driving depth of nail head can be adjusted without tool. It is a super tool for interior decoration, carpentry, flooring, roofing, molding, and door, etc..
Check Stock

Standard Duty Pneumatic Door Closer, Window Closer, Snap Plate Hold Open Feature & Smooth Closing Motion, Adjustable Closing Speed, Aluminum Grey

  • Standard duty pneumatic storm and screen door window closer. Please refer to the manual (on the packaging) for the detailed installation process!.
  • For light weight storm doors, wood or metal out swing doors. Type: Outswinging..
  • Made of aluminum, Strong and durable, Rust-proof..
  • Full 100 degree opening, snap plate hold open..
  • Adjustable closing speed, smooth closing..
Check Stock

Freeman P4FRFNCB Pneumatic Framing And Finishing Nailer And Stapler Kit With Bag (4-Piece)

  • Powerful Tool Set: This kit includes 4 very useful pneumatic nailers to tackle renovation and home improvement needs: framing nailer, brad nailer, angle finish nailer, and narrow crown stapler.
  • Construction Applications: The air powered nail guns in the kit are designed for everything from heavy duty projects such as framing, subfloors, roof decking, wood fencing, and building pallets to fine detail finish work like cabinetry, moulding, window casing, base boards, and trim.
  • Built to Last: All tools have a one piece hardened steel drive blade and anodized aluminum magazine and cylinder, resulting in a durable pneumatic tool kit resistant to damage.
  • 21 Degree Framing Nailer: Anti-dry-fire design, dual mode trigger, tool-free depth adjust, removable no mar safety tip, comfort grip handle, and 360 degree adjustable exhaust.
  • Brad Nailer: Tool-free depth adjust, quick jam release, no mar safety tip, ergonomic body, comfort grip handle, and 360 degree adjustable exhaust.
  • 34 Degree Angle Finish Nailer: Dual mode trigger, tool-free depth adjust, quick jam release, no mar safety tip, comfort grip handle, and 360 degree adjustable exhaust.
  • Narrow Crown Stapler: Tool-free depth adjust, quick jam release, no mar safety tip, ergonomic body, comfort grip handle, and 360 ....
Check Stock

Baisiky 3inch Air Cut Off Tool,Angle Grinder Pneumatic Cutting Machine With 5-Pieces 3" Cutting Disc Set,Free Speed 20000RPM

  • High-speed rotation, 3" (75mm) heavy-duty air cut off tool is widely used in a variety of applications, great for cutting steel rods, metal plate, fiberglass, composite materials, angle iron.
  • Maximum rotary speed up to 20,000rpm, the high-speed pneumatic cutoff tool will help you get stuff done faster and easier.
  • The multiple airflow adjustments make control easy – all you need is a quick turn of a screwdriver.
  • Die-cast aluminum body, air cutting tool is wear-resistant and anti-oxidative, fine workmanship keeps long service life.
  • The Tool's hand-held and compact right-angle design provides flexibility in tight spaces for minimal user hand fatigue when operating..
Check Stock

Spot Nails PS7116 Upholstery Stapler for 22-Gauge 3/8-Inch Crown Staples, 1/8 - 9/16-Inch

  • [Handy,Light and Durable] Only weighs 2LBS(0.9kg) with solid aluminum housing.
  • [Powerful but Quiet] Equipped with powerful pneumatic power system and hidden silencer design.
  • [Efficient in Stapling] Designed with staples visual window to view the remaining staples and quick reload.
  • [Attentive Design] The sensitive trigger,easily accessible magazine button,rear exhaust and slim flat nose make the whole upholstering process smooth and labor-saving.
  • Fits 22 gauge 3/8'' crown 71 series 1/4''-5/8''(6-16mm) leg length staples.
  • Great tool for kinds of upholstering,woodworking,fabric attaching,etc..
Check Stock