Top Amplifiers For Subwoofers

Boss Up (feat. Teddythelegacy) [Explicit]

  • Power - 600 Max x 4 @2-Ohms, 1200 Max x 2 @4-Ohms, 2400 Max x 1 Bridged @4 Ohms.
  • Strapping Capable - You are able to strap two OX4.600 amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Fixed High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. The High-Pass Crossover gears specifically towards “highs” in all size speakers including mid ranges and tweeters.
  • Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Specs - Dimensions: 16.22” x 6.89” x 2.22”, Weight: 7.32 lbs., Speaker Impedance: 2 Ohm, THD @ RMS O....
Check Stock

Atlas Shrugged Part III

  • ADD SUBWOOFERS: Works with high power car stereos (up to 80 watts per channel) to add subwoofer systems to any car stereo..
  • EASY TO INSTALL: Provides amplifier remote turn on output without removing car stereo..
  • OUTPUT CONVERSION: Converts car stereo speaker wire outputs to RCA Cable outputs..
  • ADDITIONAL CHANNEL: Allows the addition of 2-channel or mono amplifiers to factory or aftermarket stereos..
  • CONTROLLER: Includes mountable remote control with knob for adjusting subwoofer bass audio level from the dash..
Check Stock

BLAUPUNKT AMP4000D 4000W Max 1-CH Monoblock Class D Stereo Car Audio Amplifier

  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • Strapping Capable - You are able to strap two AC4000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Specs - Dimensions: 15” x 10” x 2.4”, Weight: 11.2 lbs..
Check Stock

Mopar Jeep Wrangler JK Kicker Speaker Upgrade

  • Mopar now offers exclusive audio system upgrade components and packages for popular Jeep vehicles from Kicker, the worlds premier high-performance car audio manufacturer..
  • Suitable for all 2007-2010 Jeep Wrangler 2 door,4 door ownersthis Mopar/Kicker dashsound bar speaker upgrade..
  • This ONE package contains a pairleft and right speakers, and canused for either the front,rear..
  • Bestall, Kicker speakers, Subwoofers, and Amplifiers have all been designed specifically for Jeep vehicles,.
Check Stock

Ground Loop Isolator RCA,ZDMYY Noise Filter for Car Audio Systems,Car Stereo Noise Suppressor for Eliminate Buzzing Noise

  • 【Ground Loop Isolator】It is designed to help with a humming noise and or engine noise for radio's with no to connect to an amplifier that requires.
  • 【Product Dimensions】Compact sized: cm/ inch.Working Voltage : AC 115/250V, 50/60Hz.
  • 【Easy to install】The ground loop noise isolator is easy to install, plug and play when the wiring is correct, and isolate current noise..
  • 【Scope of Application】Professional power filter for most of DC 12V devices. Effectively resolve the noise problem of audio. Widely used in car amplifiers, active subwoofers,computers, players,recording studios, conference room amplifiers,and other equipment..
  • 【Package Contents】G07 audio noise filter,User Manual, 12-Month Product Replacement Warranty and 24 hour Customers Service..
Check Stock

Planet Audio AC600.2 2 Channel Car Amplifier - 600 High Output Full Range Class A/B 2 - 4 Ohm Stable Mosfet Power Supply Bridgeable

  • Power - 300 Max x 2 @ 2 Ohms, 150 Max x 2 @ 4 Ohms, 600 Max Bridged x 1 @ 4 Ohms.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class....
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially....
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications....
Check Stock

Garmin 010-01969-00 Signature Series 4 Channel Marine Amplifier

  • Signature Series Marine amplifiers are designed and engineered for the harsh Marine environment.
  • A high efficiency 1400 Watt amplifier design which ensures low battery drain with a high output.
  • This delivers increased power to the connected speakers and/or subwoofers, extending your audio entertainment experience to a whole new level.
  • 1-piece heavy-duty die cast chassis, 5-way circuitry protection - thermal/reversed power polarity/DC offset protection/high + low voltage.
Check Stock

Definitive Technology in-Wall Subamp 600 120V Amplifier (Single, Black)

  • Single high powered subwoofer amplifier for use with iwsub in-wall subwoofers.
  • Power output: 275 watts/1 channel, 230 watts/2 channels.
  • Features two discrete high power amplifiers with simple connections in one convenient Housing.
  • Provides optimal power for effortlessly driving one or two iwsubs in the same room or in different zones.
  • The high quality finish is available in silver or black.
Check Stock

BOSS Audio Ohm Stable Car Amplifier with Remote Subwoofer Control

  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Strapping Capable - You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Specs - Dimensions: 13.5 x 10.44 x 2.25, Weight: 7.63 lbs..
  • Warranty - BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check Stock

Sound Storm Laboratories CG1202 2 Channel Car Amplifier - 1200 Watts Full Range Class A/B 2/4 Ohm Stable Mosfet Power Supply Bridgeable

  • Power - 600 Watts Max x 2 @2-Ohms 300 Watts Max x 2 @4-Ohms 1200 Watts Max x 1 Bridged @4 Ohms.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers.
  • Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
Check Stock

BOSS Audio Systems AR3000D Class D Car Amplifier - 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply

  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • Strapping Capable - You are able to strap two AR3000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Specs - Dimensions: 12.31 x 6.50 x 2.80, Weight: 6.86.
  • Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check Stock

Harmony Audio HA-A1500.1 Car Stereo Class D Amp Mono 3000 Watt Subwoofer Amplifier - 1 Ohm Stable - Includes Bass Remote

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock