Top Analog Channel
MOTU UltraLite-mk5 USB Audio Interface
- 18 x 22 USB audio interface – 2 combo XLR/TRS mic/line/hi-Z guitar inputs, 6 analog ins, 10 analog outs, headphone out, S/PDIF digital I/O and 8-channel optical I/O for 40 simultaneous audio channels..
- Superb analog quality with ultra-low latency – Analog outputs deliver 125 dB dynamic range. Optimized drivers deliver rock-solid performance and industry-leading low latency..
- DSP-driven monitor mixing – Mix live inputs to any analog output pair. Create a separate, unique mix for each output pair (six separate mix busses). Include computer channels in each mix..
- On-board effects – Apply reverb, 4-channel parametric EQ and dynamics processing to inputs and bus mixes..
- Universal connectivity – Connects to any computer with hi-speed USB 2.0 (audio class compliant, compatible with USB 3.0 and iOS). Compatible with all audio software..
Check StockHiFiMeDIY TINY USB DAC Digital to Analog Audio Converter ES9023+PCM2706
- Great digital to analog audio decoder solution for transcoding uncompressed digital LPCM 7.1 or 5.1 channel sound into analog surround format for existing analog amplifier or receiver. Extract compressed digital Bitstream audio such as Dolby Digital, AC3 and DTS 5.1/7.1 embedded in HDMI feed and output through its optical audio output for further decoding by downstream device. Supports uncompressed LPCM 7.1, LPCM 5.1 and LPCM 2 channel in analog output through the multi-channel 3.5 output ports..
- Supports compressed audio such as Dolby Digital, AC3, DTS 5.1 and LPCM 2CH through optical audio output. Easy EDID dip switch selection so users can easily control their HDMI source to send the desired digital audio format for decoding or conversion. No HDMI output with TV is required when receiving audio at the analog or optical audio output..
- Supports HDMI audio sampling rates up to 192 kHz. Supports optical (S/PDIF) digital audio sampling rates up to 192 kHz. Supports all HDTV resolutions including 480p,576p,720p,1080i,1080p and 4Kx2K. Output resolution follows input..
- Fully compliant with HDMI 1.3, HDCP 1.2 and DVI 1.1 standards. Supports high-bit-rate (HBR) audio. Its built-in repeater function helps devices regenerate and equalize the HDMI/DVI output sign....
Check Stock12Pcs CD74HC4067 16-Channel Analog Digital Multiplexer MUX Breakout Board Module CD74HC4067 CMOS Precise Module Compatible with DIY
- CD74HC4067 board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer, use the CD74HC4067 16-channel analog signal switch.
- It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
- The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”)..
- To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins..
- Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devi....
Check StockDigital Optical Coax to Analog Stereo Audio L/R Converter Adapter with Optical Cable RCA Cable
- It Converts Coaxial or Toslink Digital Audio .Signals to Analog L/R Audio This Converter Has Many Features That Enable It to Perform in a Superior Manner.
- Toslink Digital Audio Signals to Analog L/R Audio Supports Sampling Rate at 32, 44.1, 48 and 96 KHz . 24-bit S/PDIF Incoming bit Stream on Left and Right Channels. This optical digital to analog converter is incompatible with 5.1 Channel Signal such as Dolby AC3, please set the audio output to PCM or LPCM before using this adapter..
- Rovides Electromagnetic-noise-free Transmission .Easy to Install and Simple to Operate . Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output.
- Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM).
- If the first connection doesn't work, check that the correct device is linked, and then try again .Package Included: 1 x Digital to Analog Audio Converter Adapter, 1 x fiber Optical cable(99cm length) , 1 x USB Power Cable 1,XRCA cable, 1XEnglish manual NOTE: (excluding 5V DC power supply) .for any quality problem ,please contact us before review ,we will replace it without returning or you can return back free cost .you have no risk to try and we will provide you the best service !....
Check StockAllAboutAdapters Premium HDMI DVI Audio Injector Encoder + HDMI Repeater Function
- Replaces the original HDMI audio by filtering out the original audio embedded in HDMI signal and insert a new digital or analog audio from different audio source. Combines DVI video with external audio for a new HDMI output..
- Converting analog audio from CD player or portable music player into HDMI feed with no video feeds needed. Encodes analog stereo or multi-channel surround sound into HDMI feed for new HDMI output..
- Combines DVI video with analog or digital audio for HDMI output further distribution. Real-time audio encoding with original sonic quality retained. No lags and no loss..
- Encoding optical audio of PCM 2CH, Dolby 5.1 and DTS 2CH/5.1 type input to HDMI audio for output. Encoding analog stereo from its 3.5mm input or RCA L/R input (via adapter) to HDMI for output..
- Easy dip switch design for users to choose input audio channel between HDMI, Optical or RCA L/R before encoding. Supports HDMI audio sampling rate up to 192 Khz..
Check Stock20PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC
- Process Digital Signals: Because the multiplexer can also process digital signals, you can use it to transfer TTL level serial data to multiple devices through pipe or transfer from multiple devices..
- High Level: Drive it to high level, and it will completely disconnect the common pins (all switches are disconnected)..
- Scope of Application: It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
- 16 Channel Analog Multiplexer: This is a very convenient 16 channel CD74HC4067 analog, digital multiplexer, demultiplexer..
- Bidirectional Internal Switch: With a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
Check StockAnalog Devices ADG509ATQ Analog Multiplexer
- 【16-channel Analog Multiplexer】- This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
- 【Used for】- It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
- 【Process Digital Signals】- Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
- 【Bidirectional Internal Switch】- The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on..
- 【Note】- Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected). Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..
Check StockJ-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH)
- Extract the digital HDMI audio signal from the HDMI input and convert it to 2 channel analog stereo output or 5.1 channel Audio output.
- Supports the highest video resolution to 1080p. Supports 225MHz/2.25Gbps per channel bandwidth.
- Supports 12bit per channel (36bit all channel) deep color. Supports HDCP, Video EDID Pass Through.
- Audio EDID Settings: 2CH for L/R or SPDIF stereo output.
- 5.1CH for SPDIF Output, Supports uncompressed audio such as LPCM. Supports compressed audio such as DTS Digital, Dolby Digital.
- Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH, Support 3D video (To get 3D, all units connected to the splitter outputs must support 3D). This item supports Apple TV and various Blu-ray player and satellite receivers.DescriptionThis device extracts the digital audio signal from the HDMI input and converts it to 2 channel analog stereo output or 5.1 channel Audio outputs..
Check StockRF Coax to HDMI DVI Demodulator Analog TV Tuner for NTSC System
- Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals. Supports all coax signals coming from cable outlets or cable boxes with RF output only, satellite receivers or modulated CCTV security systems. Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs..
- Advanced RF coax TV demodulator for converting the RF coax cable TV signals into either 1080p HDMI or DVI output at 1920×1080 pixels..
- Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. [Note]: This is an analog TV tuner so it can not be used for digital cable channels and can not accept antenna input..
- Multiple tuner units can work together with video wall system or split-screen video processor to form a large-scale display system or display multiple TV channels on one screen at the same time. Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater syst....
Check StockHotone XTOMP Bluetooth Modeling Effects Pedal
- Hotone XTOMP Multi-Effects Bluetooth Pedal - 9V Power Supply - Hotone Warranty.
- Audio Jacks: Left in (mono), Right in, Left out (mono), Right out.
- Bypass Mode: Left channel - Relay True Bypass & Analog Buffer.
- Bypass, Right Channel: Analog Buffer Bypass.
Check StockUSB Data Acquisition Card Module 779026-01 DAQ for National Instruments NI USB-6009
- Tested, fully functional, and in excellent physical condition..
- 8-Channel Analog Input (14-bit resolution, 48 kS/s).
- 2-Channel Analog Output (12-bit resolution, 150 S/s).
- 12 digital I/O lines, 32 resolution counters.
- Convenient and easy to carry bus-powered design.
- Suitable for driver software in Windows, Mac OS X, Linux, and Pocket PC.
Check StockHDMI Audio Extractor HDMI to HDMI Audio Converter for Fire Stick Roku and Google Chrome Stick HDMI to Optical Audio and 3.5 Stereo Audio Support 1080P/ 3D with USB 1A Power Out
- HDMI to HDMI Powerful Features: Have a USB 1A power output, No additional power is required for Fire stick, Roku stick and Google chrome..
- HDMI Audio Extractor: The HDMI signal input and convert it to 2 channel analog stereo output or 5.1 channel digital audio output..
- HDMI to optical audio adapter, 5.1 channel digital audio for optical output (Please change the sound output mode when using on Fire stick).
- HDMI to stereo audio converter, 2 channel analog audio for 3.5mm jack output, Supports uncompressed audio such as PCM & LPCM..
- Plug and Play, Supports the highest video resolution to 1080p and 3D, Supports 225MHz/2.25Gbps per channel bandwidth..
Check Stock