Top Anchoring Drilling Rig
Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)
- ...ount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
- ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
- ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers.
Check StockCS Unitec ETN 162/3 P - 6-3/8" Capacity Concrete Core Drill - Wet/Dry Diamond Core Drill - 3-Speed For Concrete, Brick, Block, and Stone - MADE IN GERMANY - 110V
- Heavy-duty, light-weight hand-held core drill rig with 6-3/8" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
- Powerful 19.5 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
- 3 speed gear box (0-510/0-1150/0-2500 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
- Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
- Only 15 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available. Easy Changeover for wet / dry drilling with integrated connections..
Check StockBosch TCHC9 SDS-plus® Universal Concrete Screw Installation 9 pc. Kit
- Fast-drilling Bulldog SDS-plus bit design – with a carbide tip, brazing process and centric tip for rapid rotary concrete drilling.
- Bosch-made carbide tip – deliver outstanding durability under heavy loads.
- Upgraded flute design – aggressively pulls dust away from hole, for faster and cooler drilling.
- Centric conical tip – ideal for drilling anchoring holes, the centering tip provides precise starts.
- Hex drive on bit fits into driver sleeve – features a 1/4 In. hex shoulder for a drive sleeve used to set masonry screws.
Check StockIrish Setter Work Men's 83912 Marshall 11" Pull-On Steel Toe Waterproof Work Boot,Brown,10 D US
- Heavy-duty, light-weight hand-held core drill rig with 6" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
- Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
- 3 speed gear box (600/1300/2800 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
- Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
- Only 16 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available..
Check StockBaby Shower / Genie and Friends / Padlock &computer
- Welcome to the most versatile, highest rated mount on the market that is always getting better and stronger. Best price – Best design – Leave it to Mount Genie..
- Our Patent-Pending “T-Bracket” is made out of the highest strength nylon and holds over 50 pounds in drywall anchoring, and 100 pounds in Stud anchoring..
- The All In Wonder Mount is compatible with ALL components from a circumference of 10 inches up to a whopping 31 inches! This includes: Routers, Modems, Soundbars, Apple TV, DVRs, DVD players, Game Systems (X-box, PlayStation, etc), Amplifiers (Sonos), Cable boxes, and even small desktop computers! Buy it once and you never need an upgrade!.
- Installs in a minute or two with just a Phillips heads screwdriver. No drilling for standard drywall installs!.
- Commercial grade Velcro straps allow for simple install and removal of components that travel with you, like game consoles..
Check StockCS Unitec END 1550 P - 2-5/8' Capacity Concrete Core Drill - Wet Diamond Core Drill - for Concrete, Brick, Block, and Stone - Made in Germany - 110V
- Heavy-duty, light-weight hand-held core drill rig with 2-5/8" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
- Powerful 13 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
- 1800 - 4400 rpm load speed dial control - concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
- Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
- Only 7 lbs., Collar Diameter 52mm collar for easy mounting, rig mounting kits available..
Check StockCS Unitec ETN 2001 P Up to 4\ 2-Speed Hand Held/Rig Mounted - Wet/Dry Concrete Core Drill - for Concrete, Brick, Block, and Stone - Made in Germany - 110V
- Heavy-duty, light-weight hand-held core drill rig with 4" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
- Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
- 2 speed gear box (0-800/0-1570 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
- Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
- Only 15 lbs., Collar Diameter 52mm collar for easy mounting, rig mounting kits available..
Check StockCS Unitec END 130/3.2-6\ Capacity Concrete Core Drill - Wet Diamond Core Drill - 3-Speed For Concrete, Brick, Block, and Stone - MADE IN GERMANY - 110V (END 130/3.1 PO)
- Heavy-duty, light-weight hand-held core drill rig with 6" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
- Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
- 3 speed gear box (600/1300/2800 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
- Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
- Only 16 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available..
Check StockPro Series 700H 6mm,7mm,1/4 Gypsy
- EFFICIENT ANCHORING— Our Pro-Series windlass kits are both reliable and efficient, making your day on the water stress-free. You can simply control the windlass by the push of a button. The built-in manual emergency system makes anchoring easy.
- EASY TO INSTALL — Our anchor windlass is quick and easy to install with a convenient above-deck installation. Our detailed installation manual walks you through the process, perfect for the DIY boater.
- EVERYTHING YOU NEED — The Lewmar horizontal windlass kit includes windlass, three M8 studs and nuts, 70 amp circuit breaker, guarded rocker switch, solenoid, Lewmar wench, drilling template and installation manual.
- POWERFUL & DURABLE —The horizontal windlass has a powerful motor providing a fast line speed of 100' per minute. Made with a strong 100% 316 stainless steel for protection and durability.
- TRUSTED BRAND — Our windlass kit is from Lewmar, the premiere equipment supplier- designing, manufacturing and distributing innovative, high-quality control solutions worldwide since 1946. Lewmar offers the highest levels of quality in the industry.
Check StockDrill Drills Drilling Electric Electric Drill Power Tool Power Drill Drilling Brick Brick Loud Motor Grind Grinding Sound Effects Sound Effect Sounds EFX Sfx FX Tools Power Tools - Drills [Clean]
- Heavy-duty, light-weight hand-held core drill rig with 6" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
- Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
- 3 speed gear box (600/1300/2800 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
- Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
- Only 16 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available..
Check StockThe Boy Crisis Why Our Boys Are Struggling and What We Can Do About It
- Max Drilling Dia.305mm: The power is strong and stable, with the max drilling diameter 305mm. It gives you smooth speed change, and the operation is....
- Steel Output Shaft: High-quality steel forged output shaft for water supply. It is capable of being used for a long time and staying constructed..
- Pure Copper Inlet: The inlet is also made of pure copper. So it is made to anti-rust and durable even though it needs to contact water while working..
- Stable Lifting: High-quality casting material makes the core drill rig sturdy and wear-resistant. With the special handle, the lifting can be....
- Widely Used: Widely used in drilling reinforced concrete, red brick, marble, and other materials. Such as installing air conditioners, pipes, stair....
Check StockKeyfit Tools All Terrain Tent Stake (8 Pack) Screw in Tent Stake Ground Anchor with Secura Strap for Extreme Winds Secure Tarps Fish Houses Hunting Ground Blinds Camping Tent
- Keyfit Tools All Terrain Tent Stake Screw In Tent Stake Ground Anchor With Secura Strap For Extreme Winds Secure Tarps Fish Houses Hunting Ground Blinds Camping Tent Inflatable Lawn Ornaments.
- Self Drilling Cutting Tip Solid Steel ~ Case Hardened Grade 8 Steel Heat Treated & Tempered For Extreme Durability.
- Secura Strap for Easy Anchoring High Winds No Problem ~10 inch length for Extra Anchoring.
- All Terrain Rocky Ground, Hard Pan, Clay, Gravel, Even Frozen Ground Is No Problem.
- See All The Keyfit Tools Products On Amazon ~Keyfit Tools Patented Products.
Check Stock