Top Angle Check

Calculated Industries 7489 AccuMASTER Value Pack – 2-in-1 Digital Angle Gauge plus the Digital 7-Inch Angle Finder Ruler | Accurate Precision Tools for Carpenters, Woodworkers, Fabricators | 2-Pieces

  • VALUE PACK INCLUDES – A precision tools combo of the Digital Angle Finder Ruler and the 2-in-1 Digital Angle Gauge. Perfect for the pro or hobbyist who needs to transfer true level and precise angle settings to their saws.
  • TOOLS USED TOGETHER – the Angle Finder Ruler enables you to determine the angle of your workpiece that you need to match. The Digital Angle Gauge helps you transfer that angle to your saw or other tool so your finished cut installs perfectly.
  • DUAL FUNCTIONALITY – Angle Gauge works as an inclinometer or tilt gauge to set or check relative angles between surfaces, also works as digital level for tight spots with bright backlit Stay glow display, strong magnetic base, dust/water resistant.
  • ANGLE FINDER RULER can be reset to zero at any position for simple relative or differential angle calculations. Large LCD display HOLD lets you freeze a display value. Full-range protractor measures 360° for both inside and outside angles, 7-inch ruler arms.
Check Stock

ChgImposs Metric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metric 60 Degree & & US 60 Degree Thread Pitch Gauge for Industrial Measurement

  • It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All the blade was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

11.8' Car Interior Rear View Mirror, Ampper Clip on Rectangular Wide Angle Rearview Mirror for Car, SUV, Truck, Van Blind Spot Reduce (Flat)

  • More View: 11.8 x 2.8 inches (30 x 7 cm) flat interior rear view mirror, rectangular ABS housing wide angle design, stretchable clip on for cars, SUVs, trucks and vans universal fit..
  • Application: used for update the original car interior rearview mirror, maximize your view in car with this large view rear mirror to expand view in driving and check the blind spot..
  • Feature: with this mirror, you can check the situation on both sides of the car, eliminate blind spots, forecast the next surroundings to avoid any accident or collision during passing, changing lanes or reversing, increase driving safety. Also can used to check the child on the backseat..
  • High quality: made of real HD glass to offer crystal clear visibility, it's so firmly and will not fall off even on bumpy roads, spend less and makes lifetime safer..
  • Easy to install: install and test within 30 seconds, just clip on to the original interior rearview mirror with the adjustable buckles, adjust the rearview mirror's angle and finish..
Check Stock

SPEEDWOX Thread Pitch Gauge Set Thread Measuring Gauge Set 58Pcs Metric & America SAE & Inch 52Pcs Metric & Inch 51Pcs America SAE Screw Pitch Gage Center Gauge Stainless Steel Pitch Gauge

  • It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All the blade was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

Supermotorparts 10mm Thread Auxiliary Side Handle For Angle Grinder Makita 9523NB

  • Replacement for original part.Please check part comparibility to see if it fits your model..
  • Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm).
Check Stock

eOUTIL Digital Level Angle Finder Waterproof IP65 Protractor Angle Gauge Inclinometer with V-Groove Magnetic Base/0~360 Degree

  • V-groove Magnetic Base: This magnetic V-groove base of digital angle gauge can be firmly attach to ferrous metal surfaces like pipe, steel construction framing, metal fabrication. Rugged durable aluminum frame for precision leveling measurement.
  • Absolute & Relative Measurement: This digital protractor has absolute angle measurement to test whether the working surface is on the level to check roof slopes, wheel alignment, etc. Moreover, this magnetic level lets you check the relative angles between the surfaces.
  • High Accuracy: Accurate to the ±0.1° at 0° and 90°.
  • ±0.2° at other angles. Displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. With reading hold function, it is convenient to record by this level digital inclinometer bevel box. Moreover, you can have an accurate measurement of the angles between two measured surfaces.
  • Backlight LCD Display With Audio Indicator: Featuring a large, bright LCD display you can easily read the measurements whatever the light conditions. The display value reverses automatically when the electronic level is upside down. Acoustic signal routing via beeps when you reached 0° or 90°.
  • IP65 Waterproof And Dust-proof Level: It has IP65 protection which makes it suitable for use in harsh ....
Check Stock

Topbuti 5pcs Grinder Flange Angle Wrench Spanner Metal Lock Nut for Compatible with Dewalt Milwaukee 193465-4 Bosch Black Decker Ryobi Makita 5\ 5/8-11 Parts

  • Quantity: 1pcs angle grinder wrench, 2 pcs inner angle grinder flange nuts , 2 pcs outer angle grinder flange nuts. Non-original aftermarket parts, please check the size and comptibility before order, thank you..
  • Outer Nut Size: 5/8"-11, suit for all 4-1/2.
Check Stock

Check Valves 3/4 inch UPVC True Union Swing Check Valves 3/4’’ Clear

  • 3/4’’ - Meets ASTM and ANSI standards.
  • True union check valve, can be taken apart for cleaning.
  • Swing check valve, no spring, can be mounted at any angle.
Check Stock

General Tools T-Bevel Gauge & Protractor #828 - Digital Angle Finder with Full LCD Display & 8\ Stainless Steel Blade

  • PREVENT WASTE: This digital 5” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements..
  • CORNER ANGLE FINDER: Digital angle gauge includes an LCD reader, makings measurements easy to read, while the innovative center check notch enables exact ruler placement markings. Use the electric meter for custom cuts and crown molding..
  • LEVEL RULER: This tool is ideal for finding angles in tight spots, and with the lock feature, the user can improve accuracy and save time when finding the measurement. It's perfect for doing work on framing, custom furniture building, and flooring..
  • PROTRACTOR WITH SWING ARM: Our stainless steel digital angle finder with measuring ruler has a built-in reverse angle function for usability and convenience. It's an essential tool and a great gift idea for a fellow carpenter, student, or machinist..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

5pcs Stainless Steel Screw Thread Pitch Cutting Gauge Tool Set, Metric Imperial and America SAE Type Screw Gauge for Industrial Measurement, 3Pcs Center Gage + 1Pc America Type + 1Pc Metric Imperial…

  • ☆ 52pcs Thread Pitch Gauge ☆ : MR Stainless Steel Screw Pitch Measuring Tool 0.25, which is useful to check the tool angle when cutting threads on a metal lathe, check the angle of the thread cutting tool on the V-groove of the gauge.
  • ☆ Premium Material ☆: Made of MR stainless steel, the toothed edges are sharply defined, and the numbers are stamped and easy to read, to ensure the accuracy of measurement.
  • ☆ Good Elasticity & High Strength ☆ The Surface of thread pitch gauge is polished, chrome-plated and high rust-proof.
  • ☆ Metric & Imperial ☆: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3 0.25and 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • ☆ At a glance, Easy to use ☆ : ideal for check the thread size, can be used for measuring the imperial screw thread and metric.
Check Stock

AIWFL 8\ Master Precision Level in Fitted Wooden Box For Machinist Tool 0.0002''/10''

  • 【Highly Accurate】Accuracy: 0.02mm/m (0.0002"/10").
  • 【Professional Test】Master precision level is used to check machine's horizontal and vertical positions of equipment installation..
  • 【Base with V-groove】AIWFL master precision level has a base with v-groove, which can also be applied to small-angle measurement and working surfaces with V-grooves..
  • 【Cross Test Vial】Additional cross level enables the user to check side declinations..
  • 【Application】It is mainly used to check the straightness of the guideways of various machine tools and other equipment, the correctness of the horizontal and vertical positions installed, etc..
Check Stock

YXGOOD Universal Magnetic Gauge Tool for Car Truck Adjustable Camber Castor Strut Wheel Alignment

  • 【Accurate Measurement】Measures the Camber and Caster angle on the wheel hub or brake disc. Attach the magnetic gauge to the hub or disc brake,suitable for accurate checking of the castor and camber angle Wheel Alignment tool"..
  • 【Adjustable Gauge】Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing..
  • 【Multi-Function】The magnetic gauge tool has a powerful magnet it can easily attached on all kind metal surfaces.Also it could be used as a normal gradienter.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level).
  • 【Easy To Read】Size: 4.5’’*1.2’’*0.8’’,it has a simple leveling adjustment from -5 degrees to 5 degrees.Body of gauge is made of high density aluminum and precision level vial,high strength plasticity..
  • 【Professional Tools】Allows adjustment to maintain correct wheel alignment and even tyre wear.Suitable for automobile cars motorcycles trucks vans SUV tire repair..
Check Stock