Top Angle Cut Exhaust Pipes

BTSHUB Exhaust Pipe Cutter - 3/4 to 3 Inch Exhaust and Tailpipe Cutter Chain Exhaust Cutter Tool - 15 Blades for On- and Off-Vehicle Use

  • High-Efficiency Pipe Cutter: Quickly remove old exhaust pipes with the Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness. Suitable for mild steel, galvanized steel, copper, and aluminum pipes.
  • Unique Design: 10 inches (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. There is a cutting wheel on each roller for smooth tracking..
  • High-Quality Blades: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels, only a 1/4 inch rotation is needed for a complete cut..
  • Easy to Use: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • Comfortable Grip: 9.3 inches (23.6cm) exhaust pipe cutting tool has 3.8 inches (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security. If have any item's quality problems, we will solve for you. We'd like to resend a new....
Check Stock

Cal-Van Tools 764 Exhaust Tail Pipe Cutter , Red

  • Thirteen(13) large diameter (19mm) cutting wheels cut deep into exhaust pipes.
  • Ideal for heavier walled European-type exhaust pipes.
  • Cuts pipe from 3/4-in to 3-1/4-in (19mm-83mm) in diameter.
Check Stock

Borla 140591 ATAK Cat-Back Exhaust System

  • Borla 140591 ATAK Cat-Back Exhaust System.
  • Incl. Connecting Pipes/Mufflers/Hardware.
Check Stock

Apeixoto 2.5 Inch Inlet Exhaust Tip 2.5″x4″x12″ Exhaust Tip Polished Stainless Steel with Bolt On Design Installation

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

ZOEYES 4 PCS Stainless Steel Exhaust Elbow, 2.5”Mandrel Bend Elbow - Thickness 16GA/.065”Wall, SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Stair Handrail, 90 Degree

  • Parameter - 2.5”Exhaust pipe 90 degree elbow.
  • Diameter: 2.5inch, Bend Degree: 90º, Wall Thickness: 16GA/.065”, Back arc length: 6inch (These elbow exhaust pipes can be welded to 2.5”OD tube).
  • Sturdy & Durable - Our 2.5”elbow exhaust pipe made of premium SS 304 stainless steel, smooth edge and mirror polishing.
  • Not easily damage, anti-rust, anti-oxidation 2.5 exhaust pipe.
  • Easy to Install - Laser cut end make the pipe ready to weld and easy to use, the elbow exhaust will save your time and energy.
  • Wide Application - These universal exhaust pipes are suitable replacement for your car modification, stair handrail welding, or complete own custom DIY exhaust system.
  • Package List - You will get valued 4 pieces of 90 bend elbow pipes.
  • No pollution: healthy, environmentally friendly, non-toxic and non-polluting.
Check Stock

Apeixoto 2.0 2.25 2.5 Inch Adjustable Inlet Exhaust Tip 4 inch Outlet 9 Inch Long Polished Stainless Steel Exhaust Tip with Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter within 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

Apeixoto 2.5 Inch Inlet Exhaust Tip 2.5″x4″x12″ Exhaust Tip Blue Burnt Chrome Plated Finish Stainless Steel with Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel and end is bule burnt chrome plated. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny and fancy. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assist.
Check Stock

4 inch Inlet Diesel Truck Tailtip, 8 inch Outlet Exhaust Tip, 15 inch Length Muffler Tip, Rolled End Angle Cut

  • Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • 【Protect Exhaust Pipes】: This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water..
  • 【Car Decoration】: This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect yo....
Check Stock

MacWork Exhaust Pipe Cutter, 0.6\ to 3.3\ Tailpipe Cutter, Chain Exhaust Cutter, Rolling Blade Design for Easy Cutting - Can Be Used as PVC Cutter or Copper Pipe Cutter

  • 【Wide Application】14 rolling blades(11.8").This pipe cutter cut through 15-85mm(0.6" to 3.3") pipes with a maximum thickness of 2.5mm(0.1")..
  • 【Effectively Cut】Perfect for cutting exhaust pipe and tailpipe of PPR, LOW CARBON STEEL and COPPER, not for use on stainless steel..
  • 【Built to Last】100% new and high quality. Powerful and robust.Corrosion resistant coated handle for Comfort.Designed to access where space is limited..
  • 【Keep Well-Oiled】Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item..
  • 【Cut Pipes Easily】Cut pipe with our pipe cutter tool in easy steps: 1.Wrap chain snug around pipe.
  • 4.Rotate handle back and forth to cut pipe.
  • 5.Repeat steps 3 and 4 until cut is complete..
Check Stock

Exhaust Pipe Cutter Tool and Exhaust Hanger Removal Pliers for Cutting and Disassembly of Exhaust Piping Systems

  • Exhaust pipe cutter tool features pipe cutter chain w/ cutting wheels, exhaust pipe cutter w/ cushion grips, can be used as PVC cutter or copper pipe cutter. Replacement for exhaust pipe cutter chain, tailpipe cutter, tail pipe cutter, chain tail pipe cutter..
  • The exhaust pipe cutter can cut the exhaust pipe cleanly, reducing burr or burr.
  • Cut off the exhaust pipe on or off the car to facilitate repair or installation of a catalytic converter. Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Exhaust hanger removal plier separates the rubber supports from exhaust hanger brackets, works on all import and domestic car and truck exhaust systems that use the rubber hanger supports..
  • Exhaust hanger removal plier has anti skid handle for easier use. You only need to squeeze the handle of the pliers to remove the rubber bracket from the exhaust pipe hanger, so as to improve your work efficiency..
  • Exhaust pipe cutter tool and exhaust hanger removal plier are the best combination and can easily he....
Check Stock

ARES 15009 - Exhaust Pipe Cutter - Cuts 3/4-Inch to 3 1/4-Inch Tailpipes and Exhaust Pipes - 15 Blade Design for Easy Cutting - Suitable for On- and Off-Vehicle Use

  • SPECIFICATIONS: Our Exhaust Pipe Cutter is designed to cut 3/4-inch to 3 1/4-inch tailpipes and exhaust pipes and features a cutting wheel blade on each of its 15 rollers..
  • DESIGN: Made of Chrome Molybdenum Steel, the adjustable chain uses up to all fifteen of its blade wheels to quickly and easily cut pipes. Thanks to its low-profile design, this tool is suitable for both on-vehicle and off-vehicle use, and with its ergonomically designed cushioned handles, you'll be able to maintain a safe and comfortable grip while cutting..
  • COMMON APPLICATIONS: This exhaust pipe cutter is perfect for work in tight and confined spaces and can be used on-vehicle for ultimate convenience, but works just as well off-vehicle for better leverage. If you're working on a tailpipe or exhaust pipe between 3/4-inches and 3 1/4 inches in diameter, this exhaust pipe cutter is right for you..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES Exhaust Pipe Cutter, simply contact customer service for troubleshooting help, parts, replacement....
Check Stock