Top Angle Degree Ruler

Aluminum Miter Saw Protractor, Thinkor 7\ Angle Finder Featuring Precision Laser Engraved Scales for Carpenters, Plumbers and All Building Trades

  • 2 in 1 Digital Protractor: This Digital Protractor features laser-etched metric and imperial measurements on ruler edge,plus accurate digital readout,can measure both angle and length,ideal for use in carpentry, renovation work, or drawing.
  • High Accuracy & Durable Material: Accuracy of this corner angle finder is ±0.2 degree.Durable stainless steel ruler supports measurement between mm and inch,makes it can measure length (0~400 mm/0~7 inch) convenient and accurately.
  • 0-360°Measuring & Locking Function: A hinge mechanism on the miter protractor allows a full 360 degrees to measure inside outside and reverse angles,and a locking screw can hold any angle when use your miter saw to make your cut.The angle finder will automatically display the reverse angle.
  • Zero Setting & Hold Function: Angle woodworking tool can be zeroed at any point in the swing to find relative angle.Display has a hold function to freeze movement for accuracy.Plus the display can be inverted for easy reading.
  • Large LCD Screen & AUTO OFF: The angle finder ruler has a large LCD display to get quick and clear digital readout. Automatically shut down after 5 minutes of inactivity.Powered by coin battery, comes with 2 batteries as gift.
Check Stock

Ohuhu Dual Tip Dot Markers: 15 Colors Dot Marker Pens (Fine & Dot) for Kids Adults Water-Based Ink Metallic & Regular Colors Dot Pens for Journaling Scrapbooking DIY Highlighting Drawing Markers

  • (Specifics) This is a set of Carpentry Ruler specifically for locating circle center or marking 45 degree line on a right angle..
  • (Material) Aluminum Alloy with Painted Red..
  • (Dimension) Plate: 130 x 100mm/5 x 4" , Ruler Length: 300mm/12".
  • (Application) Circle or Square Center Marking & Right Angle 45° Lining..
  • (Package Included) 1* Measurement Plate, 1* 300mm Ruler, 4* Ruler-fixing Screws.
Check Stock

Aluminum Alloy Measuring Layout Tool Miter Scriber Gauge Metric/Inch, Triangle Ruler Square Tool 14cm/5.5inch

  • -Made of sturdy aluminum alloy after oxidation treatment, this woodworking triangle ruler is durable, resistant to distortion, practical, anti-rust and corrosion resistant..
  • -Laser engraved imperial and metric scales on the front and side of this angle ruler are clear and precise, making it convenient and easy to read value or make marks while using..
  • -Lightweight and portable, easy to carry or store.
  • using for measuring the length, height and thickness..
  • -The large center hole design would fit for your finger to hold or fasten this ruler on workpieces, easy and comfortable to place, handle or move around and won't damage fragile cutting edges..
  • -This 45 degree aluminum alloy angle ruler is designed to clamp boxes, photo frames, etc, to assist with square making process.
  • an essential tool for woodworking lovers, home builders, carpenters, engineers, and hobbyists..
Check Stock

LEARNING ADVANTAGE-7752 Angle Measurement Ruler - Clear, Flexible and Adjustable Geometry Measuring Tool - Measure Angles to 360 Degrees and Lines to 12"

  • USEFUL MEASUREMENT RESOURCE -- Measure and construct all types of angles, triangles and geometric shapes with this transparent ruler. It measures angles up to 360 degrees and lengths of up to 12" or 30cm.
  • PINPOINT ACCURACY -- Measure angles to the nearest degree or to the nearest 5 degrees using the black markings around the circular pivot.
  • EASY TO MARK ANGLES -- 20 evenly spaced holes 0.5" apart enable students to mark angles without moving the ruler off the page.
  • CLEAR PLASTIC -- The flexible, transparent plastic enables users to view through the angle measurement ruler and easily measure and draw angles and lines.
  • DRAW STRAIGHT LINES -- Open the angle measurement ruler to draw straight lines up to 12" or 30cm long. It lays flat on the page when open.
Check Stock

Creative Grids Quilt Ruler 6-1/2in x 24-1/2in - CGR24

  • This 6-1/2 inch x 24-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 inch and 1/4 inch increments..
  • Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances..
  • Use the patented Turn-A-Round feature designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides to add the 1/2 inch seam allowance..
  • Easily Distinguishable – The ruler also features a 30 degree/60 degree angle. White horizontal and vertical lines are printed on the rectangle so you can easily identify the center..
  • Easy to Use – The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!.
Check Stock

Digital Angle Ruler Yangoutool Stainless Steel Digital Protractor 20inches/ 500mm

  • 【2 in 1 Functions】This Digital Angle Finder can be both as Ruler and Protractor for precise working..
  • 【Resetting & Locking】Goniometer can be zeroed at any point.
  • Strong lock button can be locked at any angle to hold the readout securly..
  • 【Battery & Quality】Pacakge includes one CR2032 coin Battery works more than 2000 hours. Stainless steel ruler and laser etched measurements offer....
  • 【Accuracy & Measuring Range】Allows a full 360° to measure inside, outside and reverse. Accuracy of the protractor is ±0.3 degree..
  • 【100% Satisfaction Gurantee: 】90 DAY MONEY BACK GUARANTEE ensures your satisfaction. If you aren't impressed with the performance of our Digital....
Check Stock

45 Degree Aluminum Alloy Angle Ruler, 2in/6cm Right Angle Triangle Height Ruler Woodworking Square Multifunction Measuring Tool

  • ... Easy To Use: The woodworking angle ruler is designed with a large center hole, suitable for your fingers to hold or fix on the workpiece, easy and comfortable to place, handle or move without damaging the fragile cutting edge..
  • Applications: This 45 degree aluminum alloy square is designed to clip boxes, picture frames, etc. to assist in square crafting.
  • a must-have tool for woodworking hobbyists, home builders, carpenters, engineers, and hobbyists..
  • Professional Manufacturing: This square measuring ruler is manufactured by professional technology, with high precision, good effect and stable performance. It is suitable for most working environments and can be used for a long time..
Check Stock

Miter Saw Protractor Angle Finder, 360 Degree Rotation Function, 7.3 inch Construction Protractors for Woodworking and All Building Trades

  • Large LCD Display: This Digital protractor is equipped with a large LCD display for easy reading.
  • Lock and Reverse angle functions: You can hold and keep the reading by pressing the HOLD function button, it also comes with a Reverse Function Button, When you measuring large angle and doing reverse measurement, The display could read up-side-down. Easy to read, laser engraving scale, clear and accurate..
  • Stainless Steel Body: Durable stainless steel body can be used for a long time.
  • use a CR2032 button battery to work for more than 2000 hours (CR2032 Battery included)..
  • Zeroing at Any Angle: Zero-adjust at any angle under the relative measurement angle of a button.
  • the locking screw is used to maintain the measured reading at any time.
  • it will be automatically shut off after 6 minutes of inactivity..
  • Quick and Accurate Reading: The combination of digital stainless steel ruler and angle finder can make accurate measurement.
  • the hinge mechanism on the angle ruler allows a complete 360 degree measurement of internal and reverse angles..
Check Stock

Digital Angle Finder, farway 2 in 1 Digital Protractor, 7Inch / 200mm Stainless Steel Digital Angle Ruler with LCD Display for Woodworking/Carpenter/Construction Tool (Battery Included)

  • 【Stainless Steel Digital Protractor】The stainless steel material is hard and durable, which can prolong the service time of this protractor. Laser etched measurements offer clear reading and years' usage..
  • 【High Accuracy & 360° Measurement Measure Angles Tool】Accuracy of this digital angle gauge is ±0.3 degree. The ruler supports measurement between metric(mm) and imperial(inch), makes it can measure length (0~200 mm/0~7 inch) convenient and accurately.Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles..
  • 【Angle Finder with LCD Display & Locking Function】Angle Finder Protractor comes with a large easy-to-read LCD display. For read it easily, this woodworking tool could be locked at any angle,and has zeroing button to reset angle finder tool at any time. It also comes with a Reverse Function Button, When you measuring large angle and doing reverse measurement,the display could read up-side-down.The function of automatic shut-off after 6 min saves energy of the battery..
  • 【Easy Operation & Wide Application Angle Protractor 】Many uses, for example as miter saw protractor or for checking angle of blade on table saw or accuracy of miter saw, making angle cuts or measuremen....
Check Stock

Multi angle measuring ruler,universal multi-angle measuring ruler 12 side hole positioning aluminum alloy multi angle measuring ruler template tool multi-angle measuring ruler with drilling locator

  • 【High-quality materials】The multi angle measuring ruler made of high quality aluminum alloy material, anti-fall, durable. the aluminum alloy multi angle measuring rule is super wear-resistant, can be used for a long time, no need to worry about corrosion, to ensure the durability of multi angle measuring rule..
  • 【Accurate measurement】The multi angle measuring ruler, high accuracy, can be accurate to the mm value, clear reading, The multi angle measuring ruler units: CM and inches not easy to paint, easy to maintain and easy to store, The multi angle measuring ruler is a precise multi angle measuring ruler template tool.
  • 【Powerful】The multi angle measuring ruler Can be freely deformed and used in various ways.the multi angle measuring ruler has a 12-piece ruler and 12 metal knobs that fold freely. Simply adjust the metal knobs to precisely create the shape you want. Measuring objects of different shapes is quick and easy..
  • 【easy to carry】This multi angle measuring ruler 12 side，universal opening locator，Interlinked, easy to carry，Not easy to lose。The universal opening locator has three sizes of openings with diameters of 45mm, 25mm, and 40mm.They are linked together，Prevent you from losing one of them at work.
Check Stock

OwnMy 45 Degree Aluminum Alloy Angle Ruler, Imperial Metric Scale Rafter Layout Carpenter Square Triangle Ruler Angle Measurement Tool for Woodworking Carpenter Workshop Square Measuring Gauging Tool

  • Made of sturdy aluminum alloy after oxidation treatment, this woodworking triangle ruler is durable, resistant to distortion, practical, anti-rust and corrosion resistant..
  • Laser engraved imperial and metric scales on the front and side of this angle ruler are clear and precise, making it convenient and easy to read value or make marks while using..
  • Overall dimension is 2.67” x 2.67” x 3.74”, lightweight and portable, easy to carry or store.
  • square with 0.6” thickness allows it to stand up by itself, using for measuring the length, height and thickness..
  • The large center hole design would fit for your finger to hold or fasten this ruler on workpieces, easy and comfortable to place, handle or move around and won't damage fragile cutting edges..
  • This 45 degree aluminum alloy angle ruler is designed to clamp boxes, photo frames, etc, to assist with square making process.
  • an essential tool for woodworking lovers, home builders, carpenters, engineers, and hobbyists..
Check Stock

2021 New Inches System Hot Ironing Measuring Ruler, Hot Hemmer Ruler Heat Resistant Ruler Sewing Tools Measuring Handmade Tool for Electric Iron Home Ironing Work, 10 Inches

  • Quality materials: made of high temperature resistant resin materials, the hot ironing ruler can be applied for a long time and is flexible, not easy to break or deform, and will not leave scratches on the hard surface.
  • The heat-resistant temperature is generally lower than 392 Fahrenheit degree, and short-term high temperature can be withstand 428 Fahrenheit degree.
  • Convenient to measuring: abandon the cm-made ironing ruler, and adopt inch is more in line with our habit, no need to bother to convert to inch, more intuitive and accurate to measure DIY product size.
  • Soft and tough: our ruler is soft and can accept different degrees of bending, and it will still return to its original shape, which can better help you iron out the shape you want.
  • Easy to operate: just place the ruler in the middle of the fabric, fold the fabric, fix the fabric on both sides with sewing clips, align the desired angle, and then immediately press the iron to sew the hem.
  • This ruler has a non-slip surface that can hold the fabric in place to prevent it from moving anywhere.
  • Ideal gift: for ironing, sewing, patchwork, measuring, drawing, cutting into clothes or fabrics, it's a suitable gift for your dear, designer and tailor.
Check Stock