Top Angle Dial Gauge

BOSTITCH Finish Nailer Kit, 15GA, FN Style with Smart Point (BTFP72156)

  • Drive 15 GA "FN" style angle finish nails from 1-1/4-inch to 2-1/2-inch length with this pneumatic nailer.
  • Integrated air blower of 15 gauge finish nailer allows to clear away debris from work surface.
  • Tool-free jam release mechanism for easy nail removal.
  • Dial-A-Depth control for precise countersinking of nails.
  • 16-inch On-center gauge flips out to measure exactly 16-inch from end to nose for installing wall trim.
  • Selectable trigger system for sequential or contact operation.
  • Other Features: oil free operation, rear air exhaust, and belt hook with integrated pencil sharpener.
  • Kit Includes: Nailer, 1/4-inch Air Fitting, Carrying Case, and Extra No-Mar Tips.
Check Stock

Starrett 683-4Z Inch Reading Internal Chamfer Gauge, 0-90 Degree Angle, 1-2\ Range

  • All ground surfaces are of hardened tool steel.
  • Internal gauges will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face of the gauge.
Check Stock

Starrett 683-2Z Inch Reading Internal Chamfer Gauge, 0-90 Degree Angle, 0-1/2\ Range

  • All ground surfaces are of hardened tool steel.
  • Internal gauges will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face of the gauge.
Check Stock

Starrett 684-1Z Inch Reading Internal Chamfer Gauge, 90-127 Degree Angle, 0-3/8\ Range

  • All ground surfaces are of hardened tool steel.
  • Internal gauges will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face of the gauge.
Check Stock

All-American 25 Quart Electric Sterilizer - 120 Volt, 50/60 Hz 1650 Watts/13.75 Amps

  • PRESSURE DIAL GAUGE - Use the easy-to-read All American 1930 pressure dial gauge to determine when the unit is pressurized and timing for canning can roughly begin, or when the pressure has dropped to zero and the lid may be safely removed..
  • FOR YOUR PRESSURE COOKER + CANNER - This dial gauge fits all All American 1930 pressure cookers/canners..
  • TESTING ACCURACY - To test if the gauge is functioning properly, compare it to the regulator weight when heating the unit. If the gauge is within +/- 2 PSI of the weight setting when it jiggles, the gauge is fine & doesn’t need to be replaced..
  • SAFE HOME CANNING - All American 1930 Pressure Cookers/Canners offer an easy solution for home canning. The USDA recommends pressure canning as the only safe way to can meat, vegetables & fruits..
  • FROM OUR FAMILY, TO YOURS - All American 1930 is a family-owned company focused on quality manufacturing above all else. We take pride in casting high-quality products that families can cherish for generations to come..
Check Stock

Shankly Dial Bore Gauge 0.001m Deep Engine Hole Cylinder Measurement Inside Micrometer Gage Cylinder Tool Kit 2m to 6m Comes with Carrying Case for Bore Measure

  • ✅ ACCURATE & PRECISE: This dial bore gauge is primarily used by machinists to precisely measure the inner diameter of bores in motor engines. When measuring cuts or hole sizes, a dial bore gauge's speed and accuracy can save a lot of time.
  • ✅ MEASURING RANGE: With this dial gauge, you can easily and accurately measure cylinder bores for taper. They have a measuring range of 2-6m and 0.001m and are equipped with a self-centering guiding protective bridge for dependable and repeated use.
  • ✅ WELL-CONSTRUCTED ENGINE TOOL: A dial bore gauge that is built to be irreplaceably reliable and precise, allowing for more efficient and trouble-free repairs. This premium bore gauge is built to last.
  • ✅ HEAVY-DUTY CARRYING CASE: Our bore gauge comes neatly in a tidy blow molded case with a built-in handle and slide latches that will make it simpler for you to keep track of each tool and arrange the entire set.
  • ✅ SATISFACTION GUARANTEED: We stand by the term "quality," and all of your items will arrive in good condition when you order from Shankly. Please contact us if you have any questions about your purchase. We will gladly assist you.
Check Stock

SPW Hunter HPV 266902 Diaphragm for HPV100G HPV101G Valves (Diaphragm)

  • The BlowTie 2 features an integrated pressure gauge. Quickly and easily dial in your pressure setting..
  • 8mm (5/16") Duotight fittings at both ends.
Check Stock

Air Conditioner Refrigerant Low and High Pressure Gauge 70mm/2.7inch for R410A R134A R22 PSI PA AC Pressure Gauges

  • [PREMIUM QUALITY] The air conditioner refrigerant pressure gauge made of high quality material, vivid dial and clear scale, easy to read the data..
  • [SIZE] Inlet of air conditioner pressure gauge connector: 1/8” NPT, 70mm/2.7in dial plate..
  • [COMPATIBILITY] Compatible Refrigerant: R410A R134A R22 refrigerant pressure gauge.
  • [PRESSURE] Range: Low pressure gauge (Blue): 0-500psi, High pressure gauge (Red): 0-800psi..
  • [PACKAGE INCLUDE] 1Pc x High pressure gauge, 1Pc x Low pressure gauge. If you have any concerns, feel free to contact us..
Check Stock

General Tools 102 0-Inch to 1-Inch .001-Inch Graduation Micrometer

  • 【Material】- This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Parameter】- 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles..
  • 【Comprehensive Angle Range】- This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °..
  • 【Suitable Utilization】- Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills..
  • 【Professional Measurement Tool】- This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection..
Check Stock

2 Inch Dia Pool Filter Pressure Guage 0-60 PSI,Swimming Pool Filter Pressure Gauge, Spa/Aquarium/Water Pressure Gauge, 1/4\NPT Lower Mount (1)

  • You will receive 1 piece 2 inch, 1/4 inch NPT bottom mount pressure gauge and 1 roller tape, they are indispensable accessory for pools and other equipment, conveniently for your installation and usage.
  • Good quality material: water pressure gauges was made of brass, which is durable and not easy to wear, the attached tape can be applied during the installation of the pressure gauge.
  • Clear and accurate readings: 2 inch dial gauge surface pool pressure gauge is 2 inch dial surface, it can provide accurate readings of filter pressure pump from 0 to 60 psi.
  • Easy to install: 2 inch dial, bottom mount 1/4 inch, compatible with most major brands with suitable connection.
  • Widely application: suitable for swimming pools, spas, hot tubs, aquariums and any other water systems.
Check Stock

The Table Saw Book, Completely Revised and Updated

  • Wide Application: Miter saw protractor #505P-7 replacement widely use in woodworking, plumbers, and all building trades..
  • Laser Dial:Laser carving dial, accurate and clearly Dial, easy to read, use velvet bag packaging, well protect the dial..
  • 7.3 Inch Miter saw protractor, you can put it in the bag or pocket, easy to carry..
  • 360-Degree Measurement:360 - degree rotation can measure different angles.Inside & Outside miter angle finder..
  • Simple Operation: Direct read, setting the cut saw angle.But It's not an instrument that measures the angle of bending, it just helps you cut some standard angles..
Check Stock

HZAUTOS 3-Way Manifold Gauge for R410A, R22, R134a, R404A Refrigerants with Aluminum Valve, Hoses, Couplers, Can Tap, Valve Core Wrench, with Gilcerol Dial Design for Shock Absorption

  • 【Glicerol dial design】The manifold gauge is filled with glicerol, which can protect the pointer well and have the shock absorption effect during transportation and operation. The gauge with gilcerol dial can have longer service time than others..
  • 【Good-quality materials】The manifold gauge set is made of aluminum + PVC + plastic, which is durable and can stand heavy use. You can easily see the refrigerant movement and conditions during the operation via the sight glass. The case with rubber coating is also for collision prevention and shock absorption..
  • 【3-color hoses】The 3-way manifold gauge is equipped with 3-color hoses, it can be recognized easily. Red for high pressure, blue for low pressure, yellow for vacuum pump or refrigerant bottle. The burst pressure can stand 3000PSI, the max working pressure is 600PSI..
  • 【Durable hose connectors】The connectors of manifold gauge set is made of copper and nylon accessories, which can prevent leakage of refrigerants, avoid environmental and health problems, and protect your equipment during the operation..
  • 【Complete package】1* 3-way gauge with glicerol dial, 3* 35″hoses, 2* quick couplers, 1* can tap, 1*value core wrench, 1* screwdriver, some accessories for replacement.
Check Stock