Top Angle Gauge Device

Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)

  • 【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
  • 【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
  • 【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
  • 【Usage】: Suitable For: Angle measurement.
Check Stock

Angle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter, Drill Bits and General Angle Gauge with Case

  • Professional Measurement Tool: This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection.
  • Professional and Standard Parameters: 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles.
  • Comprehensive Angle Range: This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °.
  • Suitable Utilization: Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills.
  • Durable for Long-Time Use: Made of high quality stainless steel, this set of angle gauge has high hardness, and it is durable for long-time use.
Check Stock

PFERD CHAIN SHARP CS-X chain saw sharpener | file dia 5/32 inch | 17300 – suitable for chain pitch 3/8 Low Profile 2 in 1 chainsaw sharpening and depth gauge file

  • CHAIN SHARP: The CS-X chain saw sharpener stands out due to its very good file position, ergonomic shape and easier operation. The device provides a....
  • PRECISION: Optimized shape for precise guidance and optimal sharpening results. Long service life thanks to interchangeable files - improved shape....
  • EFFICENCY: The chain saw sharpeners are well-suited to manual sharpening. This is more economical, much more gentle than machine-based sharpening and....
  • FLEXIBILITY: Flexible use on-site due to compact device design, easy to use and defined sharpening angle for precise and uniform sharpening result,....
  • DELIVERY KIT: 1 x CHAIN SHARP CS-X chain saw sharpener incl. 1 x depth gauge file, 2 x Classic Line chain saw files | File dia. 5/32'' | Depth gauge....
Check Stock

Magnetic flexible base, metal Magnetic flexible base Universal magnetic holder for dial gauge, magnetic force meter base strong magnetic lever dial gauge base holder(Small Base)

  • Magnetic base for metal processing, machine measurement, calibration operations, precision workpieces, machine manufacturing inspection tools..
  • Easy to adjust the direction, universal arm can be fixed at any angle, easy to use, strong suction for holding steel surface..
  • There is a fine adjustment device at the clamp table, which can be adjusted in any direction..
  • In addition to the ordinary dial gauge, the lever gauge can be clamped to the lever dial gauge with the dovetail slot..
  • There is an ON / OFF switch on the base of the magnetic base bracket to reverse the magnetization and demagnetization..
Check Stock

Magnetic flexible base, metal Magnetic flexible base Universal magnetic holder for dial gauge, magnetic force meter base strong magnetic lever dial gauge base holder(Large Base)

  • Magnetic base for metal processing, machine measurement, calibration operations, precision workpieces, machine manufacturing inspection tools..
  • Easy to adjust the direction, universal arm can be fixed at any angle, easy to use, strong suction for holding steel surface..
  • There is a fine adjustment device at the clamp table, which can be adjusted in any direction..
  • In addition to the ordinary dial gauge, the lever gauge can be clamped to the lever dial gauge with the dovetail slot..
  • There is an ON / OFF switch on the base of the magnetic base bracket to reverse the magnetization and demagnetization..
Check Stock

Proster 200mm 360°Angle Finder Data Hold LCD Angle Ruler One Key Zeroing 80mm 3 1/8\ Magnetic Height Gauge Depth Gauge for Woodworking Construction Home Decoration

  • 【Accurate Angle Finder】200mm stainless steel ruler to measure length (metric and imperial), 360°angle sensor for relative and absolute angle measurement inside and outside, Range:0-360°,Resolution：0.05°,Accuracy：±0.3°,Repeatability：0.05°..
  • 【One-key Data Hold & Zero Reseting】Knob locked one-key data hold function for both angle/depth gauge to hold the angles/depth measured at any time.
  • Zeroing reset button at any angle for relative measuring..
  • 【Multi-function Magnetic Height Gauge】3-In-1 Height/Depth/Thickness Gauge,easy to measure bore/slot depths with plunger, one key mm/inch/fraction switch, range: 80mm, resolution: 0.05mm, accuracy: 0.10mm for routers horizontal/vertical measure with self standing magnetic feet..
  • 【LCD Display & Stainless Steel】Sturdy plastic thickness gauge for with quick-reading digital LCD display, harden stainless steel angle finder ruler and depth ruler provides lifelong service..
  • 【Wide Applicatoion】This angle finder with magnetic height depth thickness gauge is especially designed for Woodworking, Construction, Home Decoration, Table saws, Hand Routers, Etc..
Check Stock

Calculated Industries 7489 AccuMASTER Value Pack – 2-in-1 Digital Angle Gauge plus the Digital 7-Inch Angle Finder Ruler | Accurate Precision Tools for Carpenters, Woodworkers, Fabricators | 2-Pieces

  • VALUE PACK INCLUDES – A precision tools combo of the Digital Angle Finder Ruler and the 2-in-1 Digital Angle Gauge. Perfect for the pro or hobbyist who needs to transfer true level and precise angle settings to their saws.
  • TOOLS USED TOGETHER – the Angle Finder Ruler enables you to determine the angle of your workpiece that you need to match. The Digital Angle Gauge helps you transfer that angle to your saw or other tool so your finished cut installs perfectly.
  • DUAL FUNCTIONALITY – Angle Gauge works as an inclinometer or tilt gauge to set or check relative angles between surfaces, also works as digital level for tight spots with bright backlit Stay glow display, strong magnetic base, dust/water resistant.
  • ANGLE FINDER RULER can be reset to zero at any position for simple relative or differential angle calculations. Large LCD display HOLD lets you freeze a display value. Full-range protractor measures 360° for both inside and outside angles, 7-inch ruler arms.
Check Stock

CaseSack Case for Klein Tools 935DAG Digital Electronic Level and Angle Gauge（case only

  • Perfectly for: Klein Tools 935DAG Digital Electronic Level and Angle Gauge.
  • Featured design: handy strong case with excellent protection.
  • Assured Protection: Semi-hard carrying case protecting the device from shock, shake, scratch. PEVA materials with pressure or hit absorbing and water resistant.
  • User friendly design: Strong compact light weight case. Good for home storage and travel carrying.
  • Worry-free Guanrantee: CaseSack offer 100% refund with quality problem. Only protective case for sales only, Device or accessories sold separately. CLICK the orange button to buy. Share with your review later on..
Check Stock

ChgImposs Metric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metric 60 Degree & & US 60 Degree Thread Pitch Gauge for Industrial Measurement

  • It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All the blade was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

75x25x36 AP30 Stainless Steel Angle Gauge Precision Micro Block Milling Adjustable Angle V Block Milling

  • 【PREMIUM STAINLESS STEEL】Our angle v block milling is made of high-quality stainless steel. This angle gauge has the advantages of surface hardening and durability.
  • 【NICKEL PLATED WORKING FACE】We carry out nickel plating treatment on the working surface of each degree angle plate angle, and the parallelism and perpendicularity of the rust removal of this adjustable angle v block are finely ground to 0.01mm.
  • 【FIXED ANGLE PROCESSING】This precision gauge can use the cursor to indicate the stepless tilt adjustment angle, and then fix it with screws to make various fixed angle processing and inspection workpieces.
  • 【ANGLE V BLOCK】The corner V-shaped block has the characteristics of high precision and easy operation. This micro v block milling can meet your various work needs.
  • 【WIDELY USED】This high precision angle gauge uses adjustable angle grinders and adjustable blades on milling machines, planers, and drilling machines. After the workpiece is processed, this stainless steel block milling crosses or clamps the workpiece with other fixtures, such as processing inclined planes, inclined hole drilling, etc.
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock