Top Angle Gauge For Masonry

Powersonic 4-1/2 inch Diamond Saw Blade Set for Angle Grinders - Pack of 3

  • 1 continuous rim For Smooth cutting of marble, granite, tile & ceramics.
  • 1 segmented rim For Fast general purpose cutting for masonry, concrete, pavers, Terrazzo, Roof tile..
  • 1 turbo rim For smooth & fast cutting of masonry, concrete, pavers, Terrazzo, Roof tile..
  • 4-1/2" Diameter for angle grinders with a 7/8" Arbor.
Check Stock

GemRed 82412 Mini Digital Level Angle Gauge Angle Finder Protractor Inclinometer Aluminum Framework with Magnet

  • 【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory..
  • 【Strong Aluminum Framework&Magnetic Flat Base】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces..
  • 【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement..
  • 【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes..
Check Stock

Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)

  • 【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
  • 【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
  • 【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
  • 【Usage】: Suitable For: Angle measurement.
Check Stock

Angle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter, Drill Bits and General Angle Gauge with Case

  • Professional Measurement Tool: This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection.
  • Professional and Standard Parameters: 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles.
  • Comprehensive Angle Range: This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °.
  • Suitable Utilization: Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills.
  • Durable for Long-Time Use: Made of high quality stainless steel, this set of angle gauge has high hardness, and it is durable for long-time use.
Check Stock

Qualarc NEW-1415-AC Manchester Newspaper Holder, Antique Copper

  • Matches with the Manchester column mount mailbox.
  • Powder coated cast aluminum newspaper box frame with 22 gauge powder coated steel insert.
  • Please note newspaper holder cannot mount in column with Manchester security chute option.
  • Strong 22 gauge powder coated masonry box.
  • Matches with Manchester Mailbox in Antique Copper Color.
Check Stock

DEWALT DW4524 4-1/2-Inch by 1/4-Inch by 7/8-Inch Concrete/Masonry Grinding Wheel

  • The product is 4-1 2" x 1 4" x 7 8" Arbor, Masonry Depressed Center Wheel, For Low Angle & Vertical Grinding.
  • The product is manufactured in United States.
  • Silicon carbide grain for long wheel life in all masonry materials.
  • High grain concentration for agressive grinding action and smoother running wheels.
Check Stock

Kingthai 16 Inch Wet Dry Segmented Cutting Concrete Diamond Saw Blade for Masonry with 1 Inch Arbor

  • Arbor:1"(25.4 mm), Segment height .395"(10mm). Size is 16"x.125"x.395"/10mm..
  • Designed for: Brick, block, concrete, masonry and stone..
  • Main features: Fast cutting speed and wide universality..
  • Applicable models: Angle grinder, Circular saw, Hand-held power saw, Masonry saw, Dry, Wet..
Check Stock

Diamond Saw Blades for Cutting Wood Metal Stones,4pcs 3inch（75mm） with Arbor10mm Dry/Wet Continuous Rim Diamond Cutting Disc for Granite Marble Stone Hard Concrete Reinforced Concrete

  • ✔Size -4pcs 3 inch (75mm),diamond height 8mm ,segment thickness 2mm ,Arbor 10mm , wet or dry cutting.
  • ✔Wide Applications --General purpose blade recommended for dry cutting of general building materials such as masonry brick, granite, marble,concrete,stone and terrazzo.
  • ✔Tangle Grinder Cutting,Carbide Multi-purpose Saw Blade is recommended for cutting all kinds of wood, including plywood and particleboard as well as hardboard, wallboard and plastics, gypsum board, fiberglass board,rubber pipe, plastic, cement residue, etc.
  • ✔Wide Applications --A blade engineered for extremely smooth cutting of porcelain tile, ceramic tile, marble, granite,masonry and other natural stone.
  • ✔Machine --Suitable for BOSCH GWS 10.8-76 VEC battery mini angle grinder Li-Ion battery, Karl battery angle grinder and other battery angle grinder systems, Milwaukee 2522-20 M12 FUEL 3-Inch Compact Cut Off Tool，and any other machines applicable to this specification.
Check Stock

Proster 200mm 360°Angle Finder Data Hold LCD Angle Ruler One Key Zeroing 80mm 3 1/8\ Magnetic Height Gauge Depth Gauge for Woodworking Construction Home Decoration

  • 【Accurate Angle Finder】200mm stainless steel ruler to measure length (metric and imperial), 360°angle sensor for relative and absolute angle measurement inside and outside, Range:0-360°,Resolution：0.05°,Accuracy：±0.3°,Repeatability：0.05°..
  • 【One-key Data Hold & Zero Reseting】Knob locked one-key data hold function for both angle/depth gauge to hold the angles/depth measured at any time.
  • Zeroing reset button at any angle for relative measuring..
  • 【Multi-function Magnetic Height Gauge】3-In-1 Height/Depth/Thickness Gauge,easy to measure bore/slot depths with plunger, one key mm/inch/fraction switch, range: 80mm, resolution: 0.05mm, accuracy: 0.10mm for routers horizontal/vertical measure with self standing magnetic feet..
  • 【LCD Display & Stainless Steel】Sturdy plastic thickness gauge for with quick-reading digital LCD display, harden stainless steel angle finder ruler and depth ruler provides lifelong service..
  • 【Wide Applicatoion】This angle finder with magnetic height depth thickness gauge is especially designed for Woodworking, Construction, Home Decoration, Table saws, Hand Routers, Etc..
Check Stock

Calculated Industries 7489 AccuMASTER Value Pack – 2-in-1 Digital Angle Gauge plus the Digital 7-Inch Angle Finder Ruler | Accurate Precision Tools for Carpenters, Woodworkers, Fabricators | 2-Pieces

  • VALUE PACK INCLUDES – A precision tools combo of the Digital Angle Finder Ruler and the 2-in-1 Digital Angle Gauge. Perfect for the pro or hobbyist who needs to transfer true level and precise angle settings to their saws.
  • TOOLS USED TOGETHER – the Angle Finder Ruler enables you to determine the angle of your workpiece that you need to match. The Digital Angle Gauge helps you transfer that angle to your saw or other tool so your finished cut installs perfectly.
  • DUAL FUNCTIONALITY – Angle Gauge works as an inclinometer or tilt gauge to set or check relative angles between surfaces, also works as digital level for tight spots with bright backlit Stay glow display, strong magnetic base, dust/water resistant.
  • ANGLE FINDER RULER can be reset to zero at any position for simple relative or differential angle calculations. Large LCD display HOLD lets you freeze a display value. Full-range protractor measures 360° for both inside and outside angles, 7-inch ruler arms.
Check Stock

EZARC 5 inch Diamond Blade, Segmented Stone Expert Diamond Saw Blades for Angle Grinder, 5\ Stone Blade for Cutting Concrete Granite Masonry Brick (2-Pack)

  • ★【Stone Master】EZARC diamond blade is designed for aggressive cutting on masonry materials such as granite, concrete, nature stone and brick. Whether you are a construction worker, plumber, tile installer, roof worker, paver, DIY enthusiast or work at your home studio, this cutting blade is the perfect for you..
  • ★【Speed-optimized cutting】EZARC has increased the cutting speed of its new Stone-Master Segmented rim diamond saw blade by 30% to meet the current market requirement for speed..
  • ★【Long Service Life】Thanks to premium diamond grit with hardness HRC90+ and special dimensional arrangement, our grinder masonry blade has maximum cutting life. This angle grinder concrete blade guarantees a much longer lifetime for heavy duty cutting demands..
  • ★【Fit Tools】 EZARC 5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor. Disc Size:5 Inch.
  • ★【Reliable Safety】This 5 Inch diamond blade for angle grinder is manufactured with high strength alloy steel and prime diamond matrix, which ensure spark-free cutting without burning marks on hard materials. Universal for dry or wet cutting..
Check Stock

EZARC 4-1/2 inch Diamond Blade, Segmented Stone Expert Diamond Saw Blades for Angle Grinder, 4.5\ Stone Blade for Cutting Concrete Granite Masonry Brick (2-Pack)

  • ★【Stone Master】EZARC diamond blade is designed for aggressive cutting on masonry materials such as granite, concrete, nature stone and brick. Whether you are a construction worker, plumber, tile installer, roof worker, paver, DIY enthusiast or work at your home studio, this cutting blade is the perfect for you..
  • ★【Speed-optimized cutting】EZARC has increased the cutting speed of its new Stone-Master Segmented rim diamond saw blade by 30% to meet the current market requirement for speed..
  • ★【Long Service Life】Thanks to premium diamond grit with hardness HRC90+ and special dimensional arrangement, our grinder masonry blade has maximum cutting life. This angle grinder concrete blade guarantees a much longer lifetime for heavy duty cutting demands..
  • ★【Fit Tools】EZARC 4.5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor. Disc Size:4-1/2 Inch.
  • ★【Reliable Safety】This 4 1/2 diamond blade for angle grinder is manufactured with high strength alloy steel and prime diamond matrix, which ensure spark-free cutting without burning marks on hard materials. Universal for dry or wet cutting..
Check Stock