Top Angle Grind

Robert Sorby 67HS 6 Piece Lathe Turning Set with 3/4\ Spindle Roughing Gouge, 3/8\ Spindle Gouge, 3/8\ Bowl Gouge, 3/4\ Standard Skew Chisel, 1/8\ Parting Tool and 1/2\ Round Nose Scraper 67HS

  • The large, 3” x 5” slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process..
  • The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you’ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system..
Check Stock

Concord Blades MCB1200T080HP 12-Inch 80 Teeth TCT Ferrous Metal Cutting Blade

  • Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required..
Check Stock

Silicon Carbide Grinding Stone Angle Grinder Wheel 3 Inch Thicken 100 Type M9 Thread Angle Grinder Polishing Wheel Buffing for Bench Buffer Electric Dril

  • Dimensions: 100 type angle grinder special, the grinding wheel comes with copper thread, can be directly installed angle grinder, simple and easy to....
  • Material: The grinding wheel is made of diamond, with long service life, high material removal rate, double thickness and double durability. Can be....
  • Rough Grinding: Two types of polishing wheels, 50 grit (coarse), 100 grit (thin). It can be used to grind various metals and non-metals, such as alloy....
  • Application: Buffing polishing wheel is installed on the mini bench buffer, bench grinder or hand electric drill, used to grind, rust, polish and....
  • Safety Protection: When using, pay attention to wearing masks, eye masks, ear muffs and other protective items. After confirming that the polishing....
Check Stock

Off-Grid Knives - Ridgeback - Bushcraft Fixed Blade Knife w. Sandvik 14C28N Blade Steel, Scandi Grind, Micarta Scales, Kydex Sheath, Hunting, Camping, Fishing, Survival

  • ...ld-leading steel manufacturer in Sweden that makes advanced stainless steels. 14C28N offers a unique combination of excellent edge performance, high hardness (HRC 61) and corrosion resistance...perfect for hard-use outdoor knives..
  • ⚙️SCANDI GRIND: The Scandi grind, also known as a "zero grind" because there's no angle change in the edge. This grind creates an edge that is made to split wood and cut with razor sharp precision, great for feather-sticking and chopping. Combine the Scandi grind with a wide belly five inch blade, simply makes baton work and chopping wood a breeze..
  • ️RELIABLE BUSHCRAFT BEAST: We designed the Ridgeback to be a tool you can rely on in all outdoor environments. Camping, Hiking, Fishing, Hunting, Bushcraft, Survival, Chopping, Feather Sticking, Wood Processing, Shelter Construction...and any situation when you're Off-Grid..
  • MICARTA SCALES: We chose Micarta due to it's stability, light weight and resistance to humidity and wet environments...ideal for outdoor survival, bushcraft and camping use...we also think the black and blue look is very easy on the eyes..
  • ERGONOMIC HANDLE: The ergos were designed for comfort and safety with a forward finger guard to prevent your hand from sliding. There's also finger notches for a 'pinch....
Check Stock

Bosch 4-1/2-Inch Angle Grinder 1375A (Renewed)

  • Compact: Weighing only 3.75 pounds, the Bosch 1375A Angle Grinder is lightweight, compact, and ideal for metal workers, vehicle fabricators, plumbers and other professionals who use grinders on a daily basis.
  • Power: The angle grinder features a Powerful 6.0 amp motor to produce 11,000 no load rpm for professional cutting and grinding applications.
  • The Efficient motor was designed with an extremely small field diameter, letting the user grind or cut with ease.
  • Comfort: The 1375A offers a 2 position side auxiliary handle specifically designed to angle to a natural position for maximum operator comfort.
  • The top handle of the angle grinder is also ergonomically designed.
  • Convenient: The angle grinder also features Bosch’s Service Minder Brush System to eliminate guesswork and stops the tool when preventative maintenance is required.
  • A 5/8 inches to 11 inch spindle works with a wide array of sizes, mounting the most popular accessories.
  • Durable: The 1375A angle grinder features an epoxy coated design to protect the tool from abrasive debris.
  • It was also designed with a sealed switch to keep dust and debris from entering the switch mechanism.
Check Stock

CMT P10024 ITK Plus Ripping Saw Blade, 10 x 24 Teeth, 10° ATB+Shear with 5/8-Inch bore

  • For fast and excellent rip cuts thanks to the shear angle design..
  • Use on radial arm saws, miter saws, table saws for cutting soft and hardwood..
  • 0.094 kerf thickness, 0.063 plate thickness, 20° cutting angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock

Callaway 2019 PM Grind Wedge, Chrome, 64 degree loft, 10 degree bounce, Right Hand

  • The PM Grind 19 is a truly astonishing wedge design from Phil Mickelson and Callaway Chief Designer Roger Cleveland..
  • The Offset Groove-in-Groove Technology positions the micro-grooves on a 20* angle for added spin on chips, pitches, and lobs..
  • The increased offset and higher toe are designed to help players control trajectory on full and partial shots.
  • The C-Grind Sole provides generous relief in the heel and toe to promote crisp, clean contact from a variety of greenside lies..
  • Premium components include a KBS Hi-Rev 2. 0 steel wedge shaft, Lambkin UTX Grip and your choice of Platinum Chrome or Tour Grey finishes..
Check Stock

Drill Bit SHARPENER Corundum Grinding Wheel Titanium Portable Powered Tools US

  • SHARPEN MULTIPLE TYPES OF DRILL BITS – high-speed steel, masonry, cobalt, & TiN-coated drill bits. Designed for the serious tool user, this professional, easy-to-use system makes it simple to keep a sharp, perfectly angled cutting edge on bits you use often.
  • CUSTOM POINT ANGLE SHARPENING – set any angle from 115° to 140° with cast aluminum point angle shuttle for added durability. Option to make a unique BACK-CUT split-point bit that gives your bit an extra-narrow chisel point, making it faster to penetrate and less likely to wander on the material you are drilling in to.
  • Holds up to carbide, titanium and cobalt material.
  • Coarse 100 Grit diamond sharpening wheel.
  • More efficient grind when sharpening larger drill bits from 1/2-Inch to 3/4-Inch.
Check Stock

Ingersoll Rand 3445MAX Air Angle Grinder, 4.5\ Wheel, 5/8 in.- 11 Thread, 12000 RPM, Rear Exhaust, 0.88 HP

  • Comfort: With a lightweight composite housing, enhanced grip and ergonomic design, the Max Series Angle Grinders are easier to work with for long periods of time..
  • Power: With an ideal power-to-weight ratio, the Max Series Angle Grinders are great for high-performance material removal. Its 0.88 hp and 12,000 rpm motor delivers the power you need to grind through the toughest jobs..
  • Versatile: The Max Series Angle Grinders are a versatile set of tools you can use in most major markets, from vehicle repair and body work to construction and metal fabrication..
  • Internal governor maximizes speed under load, thus increasing your rate of material removal.
  • Built-in lubricating wick optimizes the life of the angle gear set by improving lubrication to the bevel and pinion gear set.
Check Stock

Valhalla Custom Kydex Sheath Ka-bar Becker BK9 COYOTE BROWN One Piece

  • Knife Made in the USA, Sheath made in Taiwan.
Check Stock

Kaka Industrial TX-X3 Φ4-Φ14 mm Drill Bits Sharpener and Grinder 6 Collects End Mill Re-Sharpener Portable Grinding Sharpening Machine CNC Router Bit Sharpener with Adjustable Angle

  • Portable idiot end mill sharpener can grind 2-flute, 3-flute, 4-flute end mill..
  • Grinding is accurate and rapid, easy operation with no skill to grind..
  • It can be equipped directly with an accurate angle and long service life. Standard with SDC grinding wheel for the Carbide material, Optional CBN grinding wheel for the HSS material..
Check Stock

Yougfin Angle Grinder 20V Power Grinder Tool Cordless Adjustable 2-Position Handle Max 9000 RPM Brushless Electric Grinder with Battery & Charger Safety Guard for Grinding & Cutting

  • 【Powerful Motor】:This Yougfin Power Angle Grinder is shipped with one Lithium-ion Battery that gives 20 volts and also comes with a charger. The....
  • 【High Performance】: This electric angle grinder is less bulky than other models, but it still lets you do it all — grind, cut, sand and polish....
  • 【Elaborate Design】: 2 position adjustable side grip handle with all rubber covering provides greater control in all application and help you....
  • 【Various Accessories】：1* 4.0 Ah Lithium Ion Battery，1* Charger，2* Grinding Wheel (100mm), 1* Metal Cutting Wheel (100mm), 1* Anti-vibration....
  • 【Application & Tip】：An angle grinder can be used for several projects in your home or garden. You can use an angle grinder to cut concrete,....
Check Stock